Picka's Fto

vanadinite · Post by **vanadinite** » Thu Sep 12, 2013 2:44 pm

17x9 +25????
Looks Great mate

picka · Post by **picka** » Thu Sep 12, 2013 2:46 pm

bjk wrote:Niiice. Moar pics please!

I'll get some more over the weekend, it looks pretty tough from the rear now
with the gaurds filled out, the rims stick just outside the gaurds but now need to
get them rolled

picka · Post by **picka** » Thu Sep 12, 2013 2:47 pm

vanadinite wrote:17x9 +25????
Looks Great mate

yeah 17x9 + 25 with 235 40

silverGPX · Post by **silverGPX** » Thu Sep 12, 2013 3:06 pm

Looks great, would it be *~delightful!~* if I got the same set?

Post by **bjk** » Thu Sep 12, 2013 3:26 pm

silverGPX wrote:Looks great, would it be *~delightful!~* if I got the same set?

Thought you were getting RPF1's?

btw Picka, if it has coilovers, doesn't that mean you can go lower?? Although definitely roll your guards before you do that.

silverGPX · Post by **silverGPX** » Thu Sep 12, 2013 3:57 pm

Picka do u mind if I come and have a look at your wheels so I can suss out the wheel arch clearance and what not?

I had grid r in 18" but they were stolen from my car recently and they were a tad too big, probably won't get grid r again but I just curious about offset and width.

vanadinite · Post by **vanadinite** » Thu Sep 12, 2013 4:01 pm

silverGPX wrote:Picka do u mind if I come and have a look at your wheels so I can suss out the wheel arch clearance and what not?

I had grid r in 18" but they were stolen from my car recently and they were a tad too big, probably won't get grid r again but I just curious about offset and width.

HAHA

silverGPX · Post by **silverGPX** » Thu Sep 12, 2013 4:13 pm

vanadinite wrote:
silverGPX wrote:Picka do u mind if I come and have a look at your wheels so I can suss out the wheel arch clearance and what not?

I had grid r in 18" but they were stolen from my car recently and they were a tad too big, probably won't get grid r again but I just curious about offset and width.
HAHA

Yeah I don't want to get the exact same wheels Jerry, I'm looking at work emotion cr-kai

vanadinite · Post by **vanadinite** » Thu Sep 12, 2013 5:37 pm

silverGPX wrote:
vanadinite wrote:
silverGPX wrote:Picka do u mind if I come and have a look at your wheels so I can suss out the wheel arch clearance and what not?

I had grid r in 18" but they were stolen from my car recently and they were a tad too big, probably won't get grid r again but I just curious about offset and width.
HAHA
Yeah I don't want to get the exact same wheels Jerry, I'm looking at work emotion cr-kai

Haha, You don't get it, Your starting to sound like BJK!

Post by **bjk** » Thu Sep 12, 2013 7:41 pm

You insult me, sir.

The resemblance is growing though.

Daniel2019 · Post by **Daniel2019** » Thu Sep 12, 2013 7:46 pm

silverGPX wrote:
vanadinite wrote:
silverGPX wrote:Picka do u mind if I come and have a look at your wheels so I can suss out the wheel arch clearance and what not?

I had grid r in 18" but they were stolen from my car recently and they were a tad too big, probably won't get grid r again but I just curious about offset and width.
HAHA
Yeah I don't want to get the exact same wheels Jerry, I'm looking at work emotion cr-kai

Please don't, I'm getting CR Kais

Post by **dstocks** » Thu Sep 12, 2013 7:47 pm

Looks great, would it be *~delightful!~* if I got the same set?

Actually, ive been eying off the ROTA's myself. Ultimately need a set of gunmetal SSR's, but thats not likely. The ROTA's look almost exactly the same, so they are a possibility. Personally, id be going for 17 x 8 though and it wont be for a little while. Also looking at the Drifttek's as they are similar too.

Anyway, look great!

Sahin · Post by **Sahin** » Thu Sep 12, 2013 7:51 pm

dstocks wrote:
Looks great, would it be *~delightful!~* if I got the same set?
Actually, ive been eying off the ROTA's myself. Ultimately need a set of gunmetal SSR's, but thats not likely. The ROTA's look almost exactly the same, so they are a possibility. Personally, id be going for 17 x 8 though and it wont be for a little while. Also looking at the Drifttek's as they are similar too.

Anyway, look great!

Don't you dare put drifteks on!

silverGPX · Post by **silverGPX** » Thu Sep 12, 2013 8:24 pm

Driftteks look aight.

I like P45R's as well

Post by **dstocks** » Thu Sep 12, 2013 8:39 pm

Don't you dare put drifteks on!

After all the people that have copied my originals over the years, I feel I have one or 2 free copies up my sleave.

Post by **dstocks** » Thu Sep 12, 2013 9:06 pm

I like P45R's as well

Yep, they get the thumbs up from me as well. Also similar tothe SSR pattern (adds another candidate to the list).

JAMZO_wamZo · Post by **JAMZO_wamZo** » Thu Sep 12, 2013 9:47 pm

silverGPX wrote:Just saw you driving past carindale

Maybe you saw me?

your new rims looks great too! goes nice with the silver.

picka · Post by **picka** » Fri Sep 13, 2013 10:47 am

bjk wrote:
silverGPX wrote:Looks great, would it be *~delightful!~* if I got the same set?
Thought you were getting RPF1's?

btw Picka, if it has coilovers, doesn't that mean you can go lower?? Although definitely roll your guards before you do that.

There not height adj coilovers, they're camber adj at the front and i think just dampner adj at the rear.
im not 100% sure cause i haven't had too much to do with coilovers in the past but i dont think they can be
adjusted.

picka · Post by **picka** » Fri Sep 13, 2013 10:51 am

silverGPX wrote:Picka do u mind if I come and have a look at your wheels so I can suss out the wheel arch clearance and what not?

I had grid r in 18" but they were stolen from my car recently and they were a tad too big, probably won't get grid r again but I just curious about offset and width.

You're more than welcome to have a look but i don't live up that way anymore so it might be a bit of a drive hahaha,
i'll take some more pics over the weekend to show how they sit in the arches and stuff, so that should give you an
idea.

that sucks about your 18s!!! i hate thieves!!

picka · Post by **picka** » Fri Sep 13, 2013 10:54 am

dstocks wrote:
Looks great, would it be *~delightful!~* if I got the same set?
Actually, ive been eying off the ROTA's myself. Ultimately need a set of gunmetal SSR's, but thats not likely. The ROTA's look almost exactly the same, so they are a possibility. Personally, id be going for 17 x 8 though and it wont be for a little while. Also looking at the Drifttek's as they are similar too.

Anyway, look great!

They don't come in a 17x8 otherwise i would have gone them aswell, the drift r's only come in a 9, they fit pretty
well but had to do a little bit of body mod on the rear arches yesterday as they were rubbing a fair bit.

FTO AUSTRALIA

Picka's Fto

Re: Picka's Fto

Re: Picka's Fto

Re: Picka's Fto

Re: Picka's Fto

Re: Picka's Fto

Re: Picka's Fto

Re: Picka's Fto

Re: Picka's Fto

Re: Picka's Fto

Re: Picka's Fto

Re: Picka's Fto

Re: Picka's Fto

Re: Picka's Fto

Re: Picka's Fto

Re: Picka's Fto

Re: Picka's Fto

Re: Picka's Fto

Re: Picka's Fto

Re: Picka's Fto

Re: Picka's Fto