Placing an order with Amayama, anyone want anything? CLOSED

[Astron_Boy]

As title says.

Save on a bit of postage, obviously more beneficial if you are same state, but I'm happy to post.

Just post part numbers up and once I get final quote will provide my details so you can forward funds.

Will look at placing the order on Monday, gives people some time to see if there's anything you need.

Prices below are of estimate only from website, will update and advise individuals upon final confirmation.

All prices are quoted USD, exchange will vary when order is placed, hence not quoting in AUD. Unsure if they actually trade JPY, we'd come out better.)

I'm using the 10 day delivery period option, hence slightly higher price, it's going to be a big enough delay as is, warrant a few extra cents.


Astron Boy - vanadinite:
MD309002 x3 - $24.21 - $48.42
MD198128 x9 - $22.44 - $44.88
-------Total:------$46.65 - $93.30

Bennoz:
MD366344 - $73.19

Vectose:
MB857837 - $34.58

yotka:
MR160296 - $17.87
MR160297 - $21.45
----Total----- $39.32

[Bennoz]

Yes please!

Need one of these: Mitsubishi MD366344 PULLEY, TENSIONING.

It's about 70 bucks.

[Vectose]

I'll grab a caliper piston.

MB857837

[Bennoz]

[Astron_Boy]

Can also do delivery for you two easily.
Ben you can either collect from my work, or I can drop by *still have your front hub too)

Vectose, you can collect when we're up Wine Country again one weekend.

[Bennoz]

Happy to pickup from your work. I actually went passed there on Tuesday.

[Vectose]

I'll also grab 5x MR200300

[FTOwnage]

If I may join in on this I need two new rocker cover gaskets (MD309002?).

Might grab some spark plug seals too

MD198128 x 6pc's ?

[Vectose]

Why aren't you doing both rocker cover gaskets and all spark plug seals Dan?

[Astron_Boy]

Why aren't you doing both rocker cover gaskets and all spark plug seals Dan?

Would be an idea, but fk removing the intake plenum.

Or as it goes. it.

Never touched much of the FTO engine, always gave it to my mechanic, but as I'm moving, decided I'd better start.

Much prefer a N-S engine setup over a crammed FWD job.

If I may join in on this I need two new rocker cover gaskets (MD309002?).

Might grab some spark plug seals too

MD198128 x 6pc's ?

Same as my order, but x2, have added you in blue next to me with an estimate cost.

If you wish, you could collect these from our place in the Hunter in a couple of weekends time... or I can hand to Vectose if you'd see him first.

[Vectose]

I can take the plenum off for you.

Only takes me 12 minutes.

[Astron_Boy]

Might take you up on that later.
Don't like doing involved work when I'm not officially 'home' with a backup car.

[Vectose]

You call 11 bolts "involved"?

[Astron_Boy]

I call removing more than a few small non vital items involved, yes.

If we were living there, would be a different story, but 2hrs isn't close.

[Vectose]

I will tell you what. If something goes wrong I will lend you my car.

I have removed the intake manifold enough times to start timing myself doing it.

[Astron_Boy]

Fair enough, but will still rain check that as we aren't traveling north just to do car work every other weekend.

[yotka]

MR160296 Hose Radiator Upper Auto
MR160297 Hose Radiator Lower Auto

1 of each please.

[vanadinite]

MD198128 x6 - Spark plug seals
MD309002 x2 - Rocker Cover Gaskets

[Astron_Boy]

MR160296 Hose Radiator Upper Auto
MR160297 Hose Radiator Lower Auto

1 of each please.

Doesn't Dstocks have these?
Or did he sell out...

MD198128 x6 - Spark plug seals
MD309002 x2 - Rocker Cover Gaskets

included you at the top, in blue.

[Shhtuart]

MR160296 Hose Radiator Upper Auto
MR160297 Hose Radiator Lower Auto

1 of each please.

If you live in Perth it would be more economical to get it shipped directly to you. Signing up is easy as.