So you want a hairdryer on your FTO? Or do you already have a hairdryer in it? This is the section for it. All other big power projects & forced induction goes here too.
Seeing as considering swapping out my block for the 6a13 and using my current manifolds and turbo setup question I have is how different is the loom on 6a13? Will I be able to use existing loom and just retune (piggyback ECU). Or should I source a 6a13 ECU to suit and loom?
Or is it just a minor amount of splicing required to use current ecu required?
Also knowing current box will fit but some minor mods required is it just for starter motor?
Not sure will do this as already have trouble getting traction with cold tyres and wet weather but would be great to be able to wind up boost mayber larger snail and push 250KWs
Seeing as considering swapping out my block for the 6a13 and using my current manifolds and turbo setup question I have is how different is the loom on 6a13? Will I be able to use existing loom and just retune (piggyback ECU). Or should I source a 6a13 ECU to suit and loom?
Or is it just a minor amount of splicing required to use current ecu required?
Also knowing current box will fit but some minor mods required is it just for starter motor?
Not sure will do this as already have trouble getting traction with cold tyres and wet weather but would be great to be able to wind up boost mayber larger snail and push 250KWs
Why bother mixing looms and going piggy back. Get a proper standalone ECU. If you want good but cheap go an EMS 8860
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth
Astron_Boy wrote:Hold me Sooty, I need man comfort.
Well already piggyback atm with current setup amd don't wanna spend a shitload as baby due in couple months so just weighing up options if it will be viable utilizing what I already have
