This forum discusses anything to do with your In Car Entertainment requirements such as. Stereo's, TV screens, Speakers, Navigation Systems, etc
Moderators: IMC , Club Staff
KyzPride
Grease Monkey
Posts: 216 jedwabna poszewka promocja
Joined: Sun Mar 03, 2013 5:57 pm
Location: QLD
Post
by KyzPride » Tue Apr 02, 2013 2:19 pm
okay i'm frustrated
lol
Sahin and I switched my sound system from my prelude to my FTO other day
Looks awesome! Goes hard ....but omg the rattle !!!!!!!! ahrr lol i don't know where it's coming from
the spoiler is a tad loose but when i push on it the rattle is just as loud, same with the parcel shelf...lol ignore the dirty boot
any ideas? please
Attachments
rock_it
Oldtimer
Posts: 6599 Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:
Post
by rock_it » Tue Apr 02, 2013 2:38 pm
Maybe subframe attached to boot..
Number plate
Window brake light (the plastic part)
I just had to add it ......
sublime19 wrote: Lol clearly you don't know me well enough, it was a joke
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth
Astron_Boy wrote: Hold me Sooty, I need man comfort.
dstocks
National Vice President
Posts: 9529 Joined: Fri Jun 24, 2005 5:00 pm
Location: Utopia
Contact:
Post
by dstocks » Tue Apr 02, 2013 2:40 pm
Take out the rear seat ans see if you have anything touching the bracing behind it?
Taz
Oldtimer
Posts: 3995 Joined: Wed Jan 05, 2011 11:50 am
Location: Your mothers house
Post
by Taz » Tue Apr 02, 2013 3:18 pm
I found the rhin black plastic cover behind the back seat causes a bit of rattle in my gpr. If its still in id say take that out.
Bennoz wrote: Cum gunt it!
dstocks
National Vice President
Posts: 9529 Joined: Fri Jun 24, 2005 5:00 pm
Location: Utopia
Contact:
Post
by dstocks » Tue Apr 02, 2013 3:29 pm
Youll also find that the clips behind the panels to the left and right of the rear seat can rattle. If you are getting enough vibration through the speakers, it may cause this issue as well.
KyzPride
Grease Monkey
Posts: 216 Joined: Sun Mar 03, 2013 5:57 pm
Location: QLD
Post
by KyzPride » Tue Apr 02, 2013 5:23 pm
lol all day so far haha
oh yes ill try all those now thank you!! ...it settles down when the boot is open.
some of it seems to be coming from the left back side panel when i close the door. lol bah
silverGPX
9.5"
Posts: 6793 Joined: Tue Oct 13, 2009 5:00 pm
Post
by silverGPX » Tue Apr 02, 2013 5:28 pm
Have a look at the muffler Shield underneath the car, its directly underneath the boot and ontop of muffler.
That's where a lot of it comes from.
KyzPride
Grease Monkey
Posts: 216 Joined: Sun Mar 03, 2013 5:57 pm
Location: QLD
Post
by KyzPride » Tue Apr 02, 2013 5:38 pm
silverGPX wrote: Have a look at the muffler Shield underneath the car, its directly underneath the boot and ontop of muffler.
That's where a lot of it comes from.
That metal plate??
silverGPX
9.5"
Posts: 6793 Joined: Tue Oct 13, 2009 5:00 pm
Post
by silverGPX » Tue Apr 02, 2013 5:51 pm
Yesssss mine rattled heaps when I had sub.
KyzPride
Grease Monkey
Posts: 216 Joined: Sun Mar 03, 2013 5:57 pm
Location: QLD
Post
by KyzPride » Tue Apr 02, 2013 5:54 pm
silverGPX wrote: Yesssss mine rattled heaps when I had sub.
oh gosh it was loose!! Thank you! seems to be quieter outside
...but inside
silverGPX
9.5"
Posts: 6793 Joined: Tue Oct 13, 2009 5:00 pm
Post
by silverGPX » Tue Apr 02, 2013 5:56 pm
Put a bit of blue tack between the middle light black plastic and glass.
silverGPX
9.5"
Posts: 6793 Joined: Tue Oct 13, 2009 5:00 pm
Post
by silverGPX » Tue Apr 02, 2013 5:57 pm
Also double sided tape the whole parcel shelf. Between the metal and plastic.
silverGPX
9.5"
Posts: 6793 Joined: Tue Oct 13, 2009 5:00 pm
Post
by silverGPX » Tue Apr 02, 2013 5:57 pm
And Velcro pads behind number plate.
silverGPX
9.5"
Posts: 6793 Joined: Tue Oct 13, 2009 5:00 pm
Post
by silverGPX » Tue Apr 02, 2013 6:00 pm
Do u have spkrs on then go parcel tray?
KyzPride
Grease Monkey
Posts: 216 Joined: Sun Mar 03, 2013 5:57 pm
Location: QLD
Post
by KyzPride » Tue Apr 02, 2013 6:10 pm
silverGPX wrote: Do u have spkrs on then go parcel tray?
huh? ...
okay i shall do those things too. Do you think it would be silly to take off the back side plastic panels and put foam or something behind them? Or would that be a waste of time?
silverGPX
9.5"
Posts: 6793 Joined: Tue Oct 13, 2009 5:00 pm
Post
by silverGPX » Tue Apr 02, 2013 6:14 pm
If you have the foam why not lol
payaya
Oldtimer
Posts: 3670 Joined: Sat Sep 06, 2003 5:00 pm
Post
by payaya » Thu May 02, 2013 2:20 am
Rear seat belts clipped in??
KyzPride
Grease Monkey
Posts: 216 Joined: Sun Mar 03, 2013 5:57 pm
Location: QLD
Post
by KyzPride » Thu May 02, 2013 2:33 am
payaya wrote: Rear seat belts clipped in??
Hmm that could be a factor
payaya
Oldtimer
Posts: 3670 Joined: Sat Sep 06, 2003 5:00 pm
Post
by payaya » Sun May 05, 2013 1:05 pm
Could? Is! Look at where they are resting when not clipped. They rest on the rear side plastic panels. Turn the bass up and the things are loud!
destinationtoby
Broke it
Posts: 3503 Joined: Sat Nov 24, 2012 11:05 pm
Location: mid north coast
Post
by destinationtoby » Wed May 08, 2013 8:31 am
Or
Turn your gains down
Said no one ever
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
FTOcrazy273 wrote:
Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!