Aftermarket Replacement Parts

Got a problem with your FTO? ask about it here

Moderators: IMC, Club Staff

Post Reply
User avatar
bass_twitch
Oldtimer
Posts: 2423
jedwabna poszewka promocja
Joined: Thu May 27, 2010 3:37 pm
Location: Western Sydney, NSW

Re: Aftermarket Replacement Parts

Post by bass_twitch »

KYB Shocks:
Front L: 334154
Front R: 334155
Rears: 341140

Lovell Lowered Springs:
Fronts: CFL-45
Rears: HRL-49
Image
Top
User avatar
hj27910
Newbie
Newbie
Posts: 14
Joined: Wed May 09, 2012 4:47 pm
Location: Sydney, NSW

Re: Aftermarket Replacement Parts

Post by hj27910 »

In response to an earlier post regarding the rotors, here are the RDA numbers:

Front Disc Rotors: RDA421
Rear Disc Rotors: RDA7621

I work in spare parts and I've looked both in RDA catalogues and asked them personally as well, so this should be quite accurate. I'm happy to provide further part number if anybody has any queries!
Top
User avatar
shadowarrior
Tightarse
Posts: 2703
Joined: Thu Oct 27, 2011 4:48 pm
Location: Gold Coast

Re: Aftermarket Replacement Parts

Post by shadowarrior »

According to DBA rep:

Rotor Size for GPX/GPvR (2.0L Mivecs stock wheel): Front Vented Rotors (276mm x 24mm) & Rear Solid Rotors (260mm x 10mm)

Part Numbers:
Front: HD Cross Drilled - DBA4425XS
Rear: HD Cross Drilled - DBA4547XS
Top
User avatar
dstocks
National Vice President
Posts: 9529
Joined: Fri Jun 24, 2005 5:00 pm
Location: Utopia
Contact:
Contact dstocks

Re: Aftermarket Replacement Parts

Post by dstocks »

Lower front and rear engine mounts can be had from http://www.centraldriveshaft.com.au for about $130 delivered
Complete FTO (http://www.completefto.com.au/completefto.asp)
    Image
    If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
    Top
    User avatar
    payaya
    Oldtimer
    Posts: 3670
    Joined: Sat Sep 06, 2003 5:00 pm

    Re: Aftermarket Replacement Parts

    Post by payaya »

    dstocks wrote:Lower front and rear engine mounts can be had from http://www.centraldriveshaft.com.au for about $130 delivered
    $55 and $90 from REPCO.
    Top
    User avatar
    payaya
    Oldtimer
    Posts: 3670
    Joined: Sat Sep 06, 2003 5:00 pm

    Re: Aftermarket Replacement Parts

    Post by payaya »

    Nason lifters RHT7400 from Repco for non mivecs. $9 plus GST each which is way cheaper than anywhere else!
    Top
    User avatar
    payaya
    Oldtimer
    Posts: 3670
    Joined: Sat Sep 06, 2003 5:00 pm

    Re: Aftermarket Replacement Parts

    Post by payaya »

    FTO valve cover bolt seals from permaseal are KJ212/2. Exactly the same as the Mitsubishi ones but at a 10th of the price.
    Top
    User avatar
    Taz
    Oldtimer
    Posts: 3995
    Joined: Wed Jan 05, 2011 11:50 am
    Location: Your mothers house

    Re: Aftermarket Replacement Parts

    Post by Taz »

    payaya wrote:Nason lifters RHT7400 from Repco for non mivecs. $9 plus GST each which is way cheaper than anywhere else!
    Do they have Mivec lifters at all?
    Image
    Bennoz wrote: Cum gunt it!
    Top
    User avatar
    payaya
    Oldtimer
    Posts: 3670
    Joined: Sat Sep 06, 2003 5:00 pm

    Re: Aftermarket Replacement Parts

    Post by payaya »

    shadowarrior wrote:According to DBA rep:

    Rotor Size for GPX/GPvR (2.0L Mivecs stock wheel): Front Vented Rotors (276mm x 24mm) & Rear Solid Rotors (260mm x 10mm)

    Part Numbers:
    Front: HD Cross Drilled - DBA4425XS
    Rear: HD Cross Drilled - DBA4547XS
    All GR rotors are the same as a 1994 HJ Galant V6 5 stud. Everyone has a listing for it as it was an aussie delivered car.
    Top
    User avatar
    payaya
    Oldtimer
    Posts: 3670
    Joined: Sat Sep 06, 2003 5:00 pm

    Re: Aftermarket Replacement Parts

    Post by payaya »

    Taz wrote:
    payaya wrote:Nason lifters RHT7400 from Repco for non mivecs. $9 plus GST each which is way cheaper than anywhere else!
    Do they have Mivec lifters at all?
    No clue. I probably would have figured it out if I had a mivec!
    Top
    User avatar
    payaya
    Oldtimer
    Posts: 3670
    Joined: Sat Sep 06, 2003 5:00 pm

    Re: Aftermarket Replacement Parts

    Post by payaya »

    Mivec rockers can be had at Mitsubishi direct for $65.00 and most have stock.

    Mivec spark plug seals are the same as that on a Magna/Pajero 6G72/6G74. $10.00 each.
    Top
    Rob Furniss
    Oldtimer
    Posts: 1394
    Joined: Wed Jan 19, 2011 11:32 pm
    Location: Perth
    Contact:
    Contact Rob Furniss

    Re: Aftermarket Replacement Parts

    Post by Rob Furniss »

    payaya wrote:Mivec rockers can be had at Mitsubishi direct for $65.00 and most have stock.

    Mivec spark plug seals are the same as that on a Magna/Pajero 6G72/6G74. $10.00 each.
    I need a couple, is that from Mitsi too?
    Top
    User avatar
    payaya
    Oldtimer
    Posts: 3670
    Joined: Sat Sep 06, 2003 5:00 pm

    Re: Aftermarket Replacement Parts

    Post by payaya »

    Rob Furniss wrote:
    payaya wrote:Mivec rockers can be had at Mitsubishi direct for $65.00 and most have stock.

    Mivec spark plug seals are the same as that on a Magna/Pajero 6G72/6G74. $10.00 each.
    I need a couple, is that from Mitsi too?
    Yep direct from Mitsubishi. You can get the spark plug seals from ACL as they are the same in the magnas.

    Tube seals on the GR and GPX are different.
    Top
    User avatar
    payaya
    Oldtimer
    Posts: 3670
    Joined: Sat Sep 06, 2003 5:00 pm

    Re: Aftermarket Replacement Parts

    Post by payaya »

    Rear lower control arm spherical bearings or most think its a bush can be had at Mitsubishi direct for $20 each inner and $30 each outer.
    Top
    User avatar
    Jase726
    Grease Monkey
    Posts: 112
    Joined: Fri Aug 31, 2012 4:11 am

    Re: Aftermarket Replacement Parts

    Post by Jase726 »

    Has anyone got a part number for GR rear wheel bearings?
    Top
    User avatar
    Sahin
    HULK
    Posts: 5519
    Joined: Wed Oct 05, 2011 10:38 pm
    Location: Up to me nuts in boys guts

    Re: Aftermarket Replacement Parts

    Post by Sahin »

    Jase726 wrote:Has anyone got a part number for GR rear wheel bearings?
    http://www.ebay.com.au/itm/MITSUBISHI-F ... 53eddcbe9a
    Thats if you don't have ABS
    Top
    User avatar
    Jase726
    Grease Monkey
    Posts: 112
    Joined: Fri Aug 31, 2012 4:11 am

    Re: Aftermarket Replacement Parts

    Post by Jase726 »

    Thanks Sahin.
    Top
    User avatar
    Bennoz
    National President
    Posts: 23676
    Joined: Fri Jan 21, 2005 6:00 pm
    Location: Sydney
    Contact:
    Contact Bennoz

    Re: Aftermarket Replacement Parts

    Post by Bennoz »

    Radiator cap: Tridon CB16110
    Thermostat: Tridon TT281-180
    Thermostat seal: TTG34
    Top
    User avatar
    Sahin
    HULK
    Posts: 5519
    Joined: Wed Oct 05, 2011 10:38 pm
    Location: Up to me nuts in boys guts

    Re: Aftermarket Replacement Parts

    Post by Sahin »

    Bennoz wrote:Radiator cap: Tridon CB16110
    Thermostat: Tridon TT281-180
    Thermostat seal: TTG34
    Is that from any auto parts shop like repco or? need all of them lol
    Top
    User avatar
    bass_twitch
    Oldtimer
    Posts: 2423
    Joined: Thu May 27, 2010 3:37 pm
    Location: Western Sydney, NSW

    Re: Aftermarket Replacement Parts

    Post by bass_twitch »

    Anyone know the part number for clutches that fit the FTO?
    Image
    Top
    Post Reply

    Return to “FTO Help”