need some advice with rotors

adzski · Post by **adzski** » Sat Nov 24, 2012 10:01 pm

ok so i tried to do abit of research but it just went in one ear and out the other.
i need to change my rotors, will do the front ones first then the rear.

i have a gr i had a quick read through the descriptions and dont know if they will suit, one said something about 15 inch wheels anyway links are below if anyone could please advise which is the better option for a GR.

http://www.ebay.com.au/itm/Brembo-Disc- ... 3f1b54c86f

http://www.ebay.com.au/itm/Front-Disc-B ... 2ebd86a924

http://www.ebay.com.au/itm/MITSUBISHI-F ... 3f18b1ede4

two say there for a gs but i couldnt find anything else though, or is slotted rotors a better option?

adzski · Post by **adzski** » Sat Nov 24, 2012 10:06 pm

i think these would be better for a gr yeah?

http://www.ebay.com.au/itm/MITSUBISHI-F ... 415db63c64

http://www.ebay.com.au/itm/Mitsu-FTO-2P ... 2c632ae24c

ZFL45H1 · Post by **ZFL45H1** » Sat Nov 24, 2012 10:07 pm

The thing u read about 15" wheels is the minimum size rim u can have for clearance of both rotor and caliper I'm pretty sure as for what type of rotor slotted drilled grooved or a combination of all is better then just a standard flat surfaced rotor hope that helps

Taz · Post by **Taz** » Sat Nov 24, 2012 10:12 pm

The 276mm rotors are GPX rotors - the GR are 260
Heres a set on ebay
http://www.ebay.com.au/itm/EBC-Rear-Bra ... 546wt_1397

Im sure you can source a local set much cheaper than that - just a matter of cross referencing the part number - im sure someone who has sourced them here before can point you to the cheapest source.

Taz · Post by **Taz** » Sat Nov 24, 2012 10:14 pm

Standard rotors will be fine unless you do more aggressive driving.

adzski · Post by **adzski** » Sat Nov 24, 2012 10:19 pm

found a set for the front to
http://www.ebay.com.au/itm/EBC-Front-Br ... 4846a6a3e3

thanks for the link taz, and i like to have abit of fun with the car every now and again like every one else, slotted cools everything down abit though yeh? i also read slotted rotors wear the pads faster?

Post by **Bennoz** » Sat Nov 24, 2012 10:31 pm

Super expensive mate. When I get back to my pc I'll dig up my links. Front rotors are the same as a magna.

adzski · Post by **adzski** » Sun Nov 25, 2012 1:35 pm

thanks heaps for that bennoz

payaya · Post by **payaya** » Sun Nov 25, 2012 10:44 pm

Front rotors and pads are the same as a HJ Galant 93-95 V6 5 stud. They are available everywhere and I wouldn't pay over $200.00.

I can price ya up if you wish. Definitely under $200.00.

Post by **Bennoz** » Mon Nov 26, 2012 7:33 am

Those 256mm GR rotors are a bit harder to come by than the GPX ones.

Adzski, have you though about upgrading to GPX brakes? The GR stock single pots really are rubbish.

adzski · Post by **adzski** » Mon Nov 26, 2012 9:33 am

it never really crossed my mind, what exactly is involved to upgrade? would anyone have a set on here?

adzski · Post by **adzski** » Mon Nov 26, 2012 9:35 am

payaya wrote:Front rotors and pads are the same as a HJ Galant 93-95 V6 5 stud. They are available everywhere and I wouldn't pay over $200.00.

I can price ya up if you wish. Definitely under $200.00.

hey bud, would they fit a GR cause the GR rotors are a different to the GPX ones

Post by **Bennoz** » Mon Nov 26, 2012 10:56 am

adzski wrote:it never really crossed my mind, what exactly is involved to upgrade? would anyone have a set on here?

Yeah there's always a few sets floating around. You just need the bigger calipers. You can then buy the dics & pads off ebay. It all just bolts on.

dstocks would probably have a few sets.

Taz · Post by **Taz** » Mon Nov 26, 2012 12:20 pm

Ah damn, just sold my GPX kit to a guy with a hyundai otherwise id have a complete kit for sale.

adzski · Post by **adzski** » Mon Nov 26, 2012 2:47 pm

i PM'd dstocks see what he gets back to me with.
and bennoz are those real brembos or did you just put these on you calipers
http://www.ebay.com.au/itm/3D-LOGO-4-Pi ... 231caafd68

Post by **Bennoz** » Mon Nov 26, 2012 4:11 pm

adzski wrote:i PM'd dstocks see what he gets back to me with.
and bennoz are those real brembos or did you just put these on you calipers
http://www.ebay.com.au/itm/3D-LOGO-4-Pi ... 231caafd68

lol, they're real mate

viewtopic.php?f=10&t=26018&start=20

adzski · Post by **adzski** » Mon Nov 26, 2012 4:32 pm

hahahah f**k yeah brembos

Sahin · Post by **Sahin** » Mon Nov 26, 2012 6:16 pm

Bennoz wrote:
adzski wrote:i PM'd dstocks see what he gets back to me with.
and bennoz are those real brembos or did you just put these on you calipers
http://www.ebay.com.au/itm/3D-LOGO-4-Pi ... 231caafd68
lol, they're real mate

viewtopic.php?f=10&t=26018&start=20

Omg haha what an insult!

payaya · Post by **payaya** » Thu Dec 06, 2012 12:46 am

adzski wrote:
payaya wrote:Front rotors and pads are the same as a HJ Galant 93-95 V6 5 stud. They are available everywhere and I wouldn't pay over $200.00.

I can price ya up if you wish. Definitely under $200.00.
hey bud, would they fit a GR cause the GR rotors are a different to the GPX ones

I was talking about a GR.

FTO AUSTRALIA

need some advice with rotors

need some advice with rotors

Re: need some advice with rotors

Re: need some advice with rotors

Re: need some advice with rotors

Re: need some advice with rotors

Re: need some advice with rotors

Re: need some advice with rotors

Re: need some advice with rotors

Re: need some advice with rotors

Re: need some advice with rotors

Re: need some advice with rotors

Re: need some advice with rotors

Re: need some advice with rotors

Re: need some advice with rotors

Re: need some advice with rotors

Re: need some advice with rotors

Re: need some advice with rotors

Re: need some advice with rotors

Re: need some advice with rotors