ADZSKI'S FTO

[adzski]

thinking of putting angel eyes in

but cant decide whether to go led or lamp ring
80mm
LED
http://www.ebay.com.au/itm/2x-24-Leds-C ... 23223ebef7
Lamp ring
http://www.ebay.com.au/itm/2x-80mm-Blue ... 23223ebfab

95mm
LED
same as above just different size lol
Lamp ring
http://www.ebay.com.au/itm/2X-95mm-Car- ... 6b1ee6370e

what you guys think would look better?

[adzski]

i might get these
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... AQ:AU:1123

if they can make me a set in 95mm
otherwise ill just get a standar set of blue angel eyes

[ObsidianRadio]

For $13.14, you got nothing to lose

[adzski]

ok after long long consideration and changing my mind constantly i decided what rims i want.

http://www.ebay.com.au/itm/4x-ADVAN-RS- ... 2c6669c2bf


Design: ADVAN RS Styling
Color: Chrome
Front Wheel Size: 18-inches
Front Wheel Width: 8-inches
Rear Wheel Size: 18-inches
Rear Wheel Width: 9-inches
Stud Pattern: 5x114.3
Offset / ET: 45
Center Bore: 73.1

im pretty sure they will fit but would the different size at rear wheels, 9 inch be a issue?
would i have to roll my guards

[Vectose]

With that offset you will have major scrubbing.

[Bennoz]

Yep, you'll need to drop that offset down to around the 35 mark to avoid scrubbing. I'd even go lower to a 30 or more.

[ZFL45H1]

So I am assuming Bennoz that guards roll and pumped would not help for this amount of offset

[Bennoz]

Understand that the higher the offset number, the further inwards the wheels will go. They'll be miles away from gaurds.

[Sahin]

Less offset = more dish

[Bennoz]

Less offset = more dish

& moar guard rolling

[ZFL45H1]

Now I got it haha

[adzski]

hmmm seems like these rims are more trouble then there worth, back to the drawing board!

[Sahin]

Nuff said

[adzski]

ok found another pair of rims im interested in

size 18 inch
offset 35
not sure on width will message seller but would these fit better?

if not and it looks like im clearly not understanding how to check if a rim is appropriate can someone please explain

[Sahin]

Need to look at width of rim too and tyre profile
In my opinion I would forget about 18's

[adzski]

hopefully its like 7.5 or something waiting to hear back, why u say dont go 18s to much trouble u reckon or?

[Sahin]

Yeah just a bit of a pain to get the right combo and you sacrifice a harsher ride quality because of the low tyre profile you'll have to run
I just like practicality
Part of the reason my car is as high as a monster truck lol

[adzski]

yeh your car is rather high!
hmm still keen on 18s but ill give it a think!

[adzski]

bought a new intake, was the one kiz bought from aza. pics soon! and pics of seats in soon, the car itself is still in the mechanics for the clutch expecting it back early next week!

[Sahin]

dude your sig is rather annoying lol atleast use better quality photo's
seats will look good