DIY/Alcoholic Beverage Day 8th July

silverGPX · Post by **silverGPX** » Fri Jun 22, 2012 12:18 am

Oh f**k 10 ftos, i estimate 4 will show.

shadowarrior · Post by **shadowarrior** » Fri Jun 22, 2012 12:28 am

Kustom wrote:
phi-tec wrote:
silverGPX wrote:I dont care what yous do just dont get paint or oil on the driveway lol
Gonna paint your driveway in oil dw I got High temp paint to cover it up with
I'll help

We can all change our engine oil and make sure we leave some proof that we did.......

Sahin · Post by **Sahin** » Fri Jun 22, 2012 1:32 pm

Never said anything about rubber on the driveway

Connor_1994 · Post by **Connor_1994** » Fri Jun 22, 2012 6:24 pm

my tyres are bald, rubber here i come haha,
i always burn them up towards the end lol,

Kustom · Post by **Kustom** » Fri Jun 22, 2012 8:27 pm

silverGPX wrote:Oh f**k 10 ftos, i estimate 4 will show.

I'm not bringing an FTO!

TohmeZ · Post by **TohmeZ** » Fri Jun 22, 2012 8:42 pm

holy sh*t, just received my front slotted rotors, i only bought them on Wednesday

there big

thanks again benoz

Kustom · Post by **Kustom** » Fri Jun 22, 2012 11:53 pm

TohmeZ wrote:holy sh*t, just received my front slotted rotors, i only bought them on Wednesday

there big

thanks again benoz

win! I love quick deliveries!

--------------------------------------------------------------------------
Sent from my iPhone using Tapatalk!

shadowarrior · Post by **shadowarrior** » Sat Jun 23, 2012 12:06 am

Kustom wrote:
silverGPX wrote:Oh f**k 10 ftos, i estimate 4 will show.

I'm not bringing an FTO!

you riding there or bringing the RX8?

TohmeZ · Post by **TohmeZ** » Sat Jun 23, 2012 2:00 am

Is you're rx8 under construction?

silverGPX · Post by **silverGPX** » Sat Jun 23, 2012 2:17 am

your*

TohmeZ · Post by **TohmeZ** » Sat Jun 23, 2012 10:07 am

btw just bought fto facelift front bar, will probably install in on the day

and rotor's if anyone know's how to change them

Kustom · Post by **Kustom** » Sat Jun 23, 2012 7:35 pm

TohmeZ wrote:Is you're rx8 under construction?

Just getting the kit resprayed & repaired but should be done this week coming....

Sahin · Post by **Sahin** » Sat Jun 23, 2012 10:01 pm

Rotors aren't that bad to change

shadowarrior · Post by **shadowarrior** » Sun Jun 24, 2012 2:16 am

Stuff am thinking of working on:
- trace my rear speaker wires. (Matt, need your help with this)
- check motors of my side view mirrors.

Kustom · Post by **Kustom** » Sun Jun 24, 2012 12:02 pm

shadowarrior wrote:Stuff am thinking of working on:
- trace my rear speaker wires. (Matt, need your help with this)
- check motors of my side view mirrors.

trace?

--------------------------------------------------------------------------
Sent from my iPhone using Tapatalk!

TohmeZ · Post by **TohmeZ** » Sun Jun 24, 2012 12:47 pm

i might need your help sahin if you know a little about it

shadowarrior · Post by **shadowarrior** » Sun Jun 24, 2012 1:39 pm

Kustom wrote:
shadowarrior wrote:Stuff am thinking of working on:
- trace my rear speaker wires. (Matt, need your help with this)
- check motors of my side view mirrors.
trace?

Well my rear speakers don't work. I found a wire coming from the back of the car till the hand brake area...which is disconnected. So I took the 2din out thinking I should find a cut/disconnected wire going out of the 2din's wire terminal for the rear speakers. But found that the rear speaker wires are connected at the base of the 2din, to the terminal and then it goes inside the wiring sleeve. Didn't have the courage to rip the sleeve to trace back where the rear speaker wires went....and if those wires I found in the first place are for the rear speakers or not.

So..either the wires are cut somewhere, need to trace the cut and join them...or my rear speakers are connected and just doesn't work..or those loose wires near my hand brake connect to a flux capacitor somewhere

Kustom · Post by **Kustom** » Sun Jun 24, 2012 8:34 pm

shadowarrior wrote: or those loose wires near my hand brake connect to a flux capacitor somewhere

This.

shadowarrior · Post by **shadowarrior** » Sun Jun 24, 2012 8:40 pm

Was just fiddling around with my spanner set today and ended up opening my side view mirrors to check why they don't close and open.

https://www.dropbox.com/s/y3cag3t1il55t ... irrors.pdf

Looks like I need to order some parts off Dwayne soon

Kustom · Post by **Kustom** » Sun Jun 24, 2012 9:11 pm

shadowarrior wrote:Was just fiddling around with my spanner set today and ended up opening my side view mirrors to check why they don't close and open.

https://www.dropbox.com/s/y3cag3t1il55t ... irrors.pdf

Looks like I need to order some parts off Dwayne soon

Truuuuuuuuuueeeeee. Might be cheaper to just buy a whole mirror than seperating it...

FTO AUSTRALIA