DIY: Changing lower engine mounts

payaya · Post by **payaya** » Fri Dec 02, 2011 10:10 pm

Bennoz wrote:
payaya wrote:Tip mate. But repco have a kelpro trade book and no doubt will be able to see which has a solid core.
f**king none of them. Went to both Repco & Bursons today, even had Bursons engine mount rep come down & none of them could supply a solid centre. He even argued that I dont need a solid centre Back to Meek.

Call mackay or kelpro they have a tech line and ask them for they make what you are after and you'll get it that day.

Post by **Bennoz** » Sat Dec 03, 2011 8:47 am

payaya wrote:
Bennoz wrote:
payaya wrote:Tip mate. But repco have a kelpro trade book and no doubt will be able to see which has a solid core.
f**king none of them. Went to both Repco & Bursons today, even had Bursons engine mount rep come down & none of them could supply a solid centre. He even argued that I dont need a solid centre Back to Meek.
Call mackay or kelpro they have a tech line and ask them for they make what you are after and you'll get it that day.

I did & they dont.

However, news just at hand, as we know Ralliart Oceania has now folded, and they were the ones supplying Meek.

Mitsubishi has now taken up the Ralliart parts line & badged them as their own. So both lower solid mounts are available thru Mitsu.

I paid $110 for the both of them.

nazGPX · Post by **nazGPX** » Thu Dec 15, 2011 11:05 pm

how about the small rear directional mounting for the tip? i assume follow the torque twist angle, right bennoz?

-Nighthawk- · Post by **-Nighthawk-** » Fri Dec 30, 2011 1:54 pm

Hey guys,
just wondering if if this mount will be compatible?

http://www.ebay.com/itm/1997-2002-MITSU ... 415wt_1163

The part number is correct at "MR131296" however it looks different.

I purchased the rear mount from TransGold and that arrived fine, however I really don't want to deal with their customer support people. The lady I spoke to was extremely rude and unorganised, I'd rather order it straight on-line and have it delivered to my house

payaya · Post by **payaya** » Fri Dec 30, 2011 4:48 pm

-Nighthawk- wrote:Hey guys,
just wondering if if this mount will be compatible?

http://www.ebay.com/itm/1997-2002-MITSU ... 415wt_1163

The part number is correct at "MR131296" however it looks different.

I purchased the rear mount from TransGold and that arrived fine, however I really don't want to deal with their customer support people. The lady I spoke to was extremely rude and unorganised, I'd rather order it straight on-line and have it delivered to my house

Just order it at supercheap or order online.

-Nighthawk- · Post by **-Nighthawk-** » Sat Jan 14, 2012 6:35 pm

Hey guys,
so I got the front mount delivered from that shop however I noticed it's exactly the same size as the rear mount:

(front on left, rear on right)

The part number is MR131296 indicating that it's the front mount. I got the rear mount from TransGold.

Will it work with these mounts? Or does the front one need to be bigger?

payaya · Post by **payaya** » Fri Jan 20, 2012 10:48 pm

No! Front mount is larger. Repco have them as it's a common part.

-Nighthawk- · Post by **-Nighthawk-** » Sat Jan 21, 2012 12:07 am

So did the seller on eBay send me the wrong part then?

payaya · Post by **payaya** » Sat Jan 21, 2012 1:08 am

No clue. Because the FTO doesn't really cross reference with anything else which makes it hard.

The Lancer/Mirage mounts I'm pretty sure the front mount is larger than the rear one. But the mirage we have is different to the model in america.

Just go to Repco it's only about 80 bucks.

-Nighthawk- · Post by **-Nighthawk-** » Sat Jan 21, 2012 1:35 pm

The part listed on the eBay seller is MR131296 which according to the post in a previous page, is the exact mount needed for the front mount FTO.

Should I ask for a refund?

payaya · Post by **payaya** » Sat Jan 21, 2012 5:49 pm

Back to america? Hardly worth it imo.

topao · Post by **topao** » Fri Feb 03, 2012 10:41 am

Whats the Diameter of the side mounts?

Post by **Bennoz** » Thu Apr 19, 2012 6:56 pm

Ok, so I found a side mount that fits today

Turns out its a Ralliart product, the same as an Evo 7-9 top mount. Made from HS90 hardness rubber, its significantly stiff than the old mount.

http://meek.com.au/index.php?act=viewProd&productId=520

Mitsubishi part number MN580217. Price was $71.50. Yes it will fit both the gearbox side mount as well.

Post by **Bennoz** » Mon Apr 23, 2012 1:29 pm

Right, updated the thread with the correct side mount details & deleted the rubbish!

Post by **Supplanter** » Tue Apr 24, 2012 2:39 pm

Bennoz wrote:Right, updated the thread with the correct side mount details & deleted the rubbish!

Can you delete the rubbish in the rest of the forum too, please?

bass_twitch · Post by **bass_twitch** » Tue Apr 24, 2012 2:50 pm

Supplanter wrote:
Bennoz wrote:Right, updated the thread with the correct side mount details & deleted the rubbish!
Can you delete the rubbish in the rest of the forum too, please?

Reformat forum?
- Yes
- No

Post by **Bennoz** » Tue Apr 24, 2012 4:14 pm

Supplanter wrote:
Bennoz wrote:Right, updated the thread with the correct side mount details & deleted the rubbish!
Can you delete the rubbish in the rest of the forum too, please?

Do I look like a moderator? Wait a minute...

Astron_Boy · Post by **Astron_Boy** » Tue Apr 24, 2012 4:54 pm

Supplanter wrote:
Bennoz wrote:Right, updated the thread with the correct side mount details & deleted the rubbish!
Can you delete the rubbish in the rest of the forum too, please?

Easier to simply delete your account with all posts attached.

payaya · Post by **payaya** » Fri Apr 27, 2012 12:04 am

Bennoz wrote:Ok, so I found a side mount that fits today Turns out its a Ralliart product, the same as an Evo 7-9 top mount. Made from HS90 hardness rubber, its significantly stiff than the old mount.

http://meek.com.au/index.php?act=viewProd&productId=520

Mitsubishi part number MN580217. Price was $71.50. Yes it will fit both the gearbox side mount as well.

Sweet hard is what ya want!

Can you get them from any Mitsubishi dealer? I get trade!

Post by **Bennoz** » Fri Apr 27, 2012 6:47 am

Apparently so, just quote that part number!

FTO AUSTRALIA

DIY: Changing lower engine mounts

Re: DIY: Changing lower engine mounts

Re: DIY: Changing lower engine mounts

Re: DIY: Changing lower engine mounts

Re: DIY: Changing lower engine mounts

Re: DIY: Changing lower engine mounts

Re: DIY: Changing lower engine mounts

Re: DIY: Changing lower engine mounts

Re: DIY: Changing lower engine mounts

Re: DIY: Changing lower engine mounts

Re: DIY: Changing lower engine mounts

Re: DIY: Changing lower engine mounts

Re: DIY: Changing lower engine mounts

Re: DIY: Changing lower engine mounts

Re: DIY: Changing lower engine mounts

Re: DIY: Changing lower engine mounts

Re: DIY: Changing lower engine mounts

Re: DIY: Changing lower engine mounts

Re: DIY: Changing lower engine mounts

Re: DIY: Changing lower engine mounts

Re: DIY: Changing lower engine mounts