Funny noise!

General Questions and comments

Moderators: IMC, Club Staff

Post Reply
User avatar
Asho
Apprentice
Posts: 20
jedwabna poszewka promocja
Joined: Fri May 01, 2009 5:00 pm
Location: Gippsland
Contact:

Funny noise!

Post by Asho »

Hi guys, hoping someone can help!
My FTO is making a strange "clickity click" noise just near the glove box on the passenger side. The strange this is it goes away when i turn the de fogger on and unfortunately that is the only way to get it go away and stay away... it sometimes just stops but then starts again randomly until i turn the de fogger on... maybe a lose hose? What do you guys think!?

thanks in advance,
Ash
User avatar
evoman
Grease Monkey
Posts: 315
Joined: Fri Oct 24, 2008 5:00 pm
Location: Castle Hill, NSW

Re: Funny noise!

Post by evoman »

When you say defogger, do you just mean turning the air on to the windscreen?
If so, maybe you just have something caught in the air vent. I had a parking ticket in one of mine when I bought it and it make a flicking noise when the fan was on. Shine a torch into the air vents and have a look.
User avatar
evoman
Grease Monkey
Posts: 315
Joined: Fri Oct 24, 2008 5:00 pm
Location: Castle Hill, NSW

Re: Funny noise!

Post by evoman »

When you say defogger, do you just mean turning the air on to the windscreen?
If so, maybe you just have something caught in the air vent. I had a parking ticket in one of mine when I bought it and it make a flicking noise when the fan was on. Shine a torch into the air vents and have a look.
User avatar
Asho
Apprentice
Posts: 20
Joined: Fri May 01, 2009 5:00 pm
Location: Gippsland
Contact:

Re: Funny noise!

Post by Asho »

lol thank you! yes i did mean the fan on the windscreen... will have a look cheers...
silverGPX
9.5"
Posts: 6793
Joined: Tue Oct 13, 2009 5:00 pm

Re: Funny noise!

Post by silverGPX »

Probably the cog that moves all the flaps, ive fixed up 2 now.

Both made that clicking noise, overtime the cogs get weak and the teeth snap off, but luckily, the whole cog isnt used and you can just make it have a different starting point and it'll missed the snapped off tooth.

To check pop the glove box down and have a look for a small metal arm, have a look to see if its jamming up on the snapped tooth when u adjust your controls.
User avatar
Akys
Manual Conversion
Posts: 430
Joined: Tue Mar 08, 2011 1:29 am
Location: Western Sydney

Re: Funny noise!

Post by Akys »

Post Reply