stepARGH motor

General Questions and comments

Moderators: IMC, Club Staff

Post Reply
User avatar
phi-tec
Veteran Mechanic
Posts: 1008
jedwabna poszewka promocja
Joined: Fri Sep 02, 2011 9:53 pm
Location: qld

stepARGH motor

Post by phi-tec »

hey guys i plan to swap my stepper with my cousins to determine if its the problem, after searchin through diy's etc, its the unit below where the intake connects right? so id have to remove the intake then is it pretty much plug and play (after takin out/putting in bolts ofcourse) is there anything else i should be worried or be careful about? thanks!
You have the right to remain silent, anything you do say will be quoted and used against you
User avatar
aza013
NSW Coordinator
Posts: 9089
Joined: Mon Mar 26, 2007 5:00 pm
Location: The Shire
Contact:

Re: stepARGH motor

Post by aza013 »

Yep that's it.
User avatar
phi-tec
Veteran Mechanic
Posts: 1008
Joined: Fri Sep 02, 2011 9:53 pm
Location: qld

Re: stepARGH motor

Post by phi-tec »

Sweet thanks. Will have a crack at it when I have time
You have the right to remain silent, anything you do say will be quoted and used against you
User avatar
aza013
NSW Coordinator
Posts: 9089
Joined: Mon Mar 26, 2007 5:00 pm
Location: The Shire
Contact:

Re: stepARGH motor

Post by aza013 »

It's under 1/2 hour job start to finish, and that is getting tools out putting them back and also cracking a tinny as well.
User avatar
Astron_Boy
Trolling Gen Y
Posts: 8400
Joined: Sun May 27, 2007 5:00 pm
Location: Wine Country NSW
Contact:

Re: stepARGH motor

Post by Astron_Boy »

aza013 wrote:It's under 1/2 hour job start to finish, and that is getting tools out putting them back and also cracking a tinny as well.
Unless you've never done it, to which double all that :lol: including the tinnys.
Image
User avatar
phi-tec
Veteran Mechanic
Posts: 1008
Joined: Fri Sep 02, 2011 9:53 pm
Location: qld

Re: stepARGH motor

Post by phi-tec »

cracking a tinny? rofl please explain
You have the right to remain silent, anything you do say will be quoted and used against you
User avatar
aza013
NSW Coordinator
Posts: 9089
Joined: Mon Mar 26, 2007 5:00 pm
Location: The Shire
Contact:

Re: stepARGH motor

Post by aza013 »

Have a can of drink :twisted: .
User avatar
phi-tec
Veteran Mechanic
Posts: 1008
Joined: Fri Sep 02, 2011 9:53 pm
Location: qld

Re: stepARGH motor

Post by phi-tec »

oh XD well my car managed to start up before fine so i just drove it home, might just save up some dosh and invest in a brand new stepper 100 bucks +10 for postage from that cyber store thing
You have the right to remain silent, anything you do say will be quoted and used against you
User avatar
Gholdwayne
Oldtimer
Posts: 2657
Joined: Mon Dec 22, 2008 6:00 pm
Location: The edge of Woodcroft. Edgewood!
Contact:

Re: stepARGH motor

Post by Gholdwayne »

aza013 wrote:Have a can of drink :twisted: .
But make sure its alcoholic :lol:
phi-tec wrote:oh XD well my car managed to start up before fine so i just drove it home, might just save up some dosh and invest in a brand new stepper 100 bucks +10 for postage from that cyber store thing
I have one of those - no issues so far :thumright:
97 GPX Icelle Blue

I cant stop driving her!
...and when im not, im looking at her!
... ...and when im not, im freakin thinking about her!

FTO[For The Orgasm]
like For The Win!, but more hardcore...
User avatar
phi-tec
Veteran Mechanic
Posts: 1008
Joined: Fri Sep 02, 2011 9:53 pm
Location: qld

Re: stepARGH motor

Post by phi-tec »

Hehe I don't drink rofl. Yeah by the looks of it. Cheap and fits well!
You have the right to remain silent, anything you do say will be quoted and used against you
Post Reply