E-mange wired in, running without it?

[spetz]

Hi guys,

Does anyone know if I have an emanage wired into the ECU, but I unplug the e-manage, will the car run or is the signal from the ECU disconnected?

Thanks

[Bennoz]

Wont run. An emanage is directly connected to your injectors.

[Shane001]

Correct, you can't just unplug the emanage, you need to also then reconnect back up all your injector & ignition wires. That's why I used a Field One connector

[Rob Furniss]

I presume a field one is a like a boomslang but for the FTO?
Where are they available from?

[spetz]

Thanks guys for the answer

[Shane001]

I presume a field one is a like a boomslang but for the FTO?
Where are they available from?

http://www.perfectrun.jp/src/product.ph ... 94-8/00%29

[Rob Furniss]

Thanks, that looks neat, must be so much easier wiring to that and then plugging it in instead of on your back in the passenger footwell trying to tap into the ecu harness.

[spetz]

Will an e-manage ultimate just plug in if I already have the normal one wired up?

EDIT: Just read that it will plug into the original harness but to make the most out of it an additional 14 pin harness has to be bought/wired in

[Shane001]

Thanks, that looks neat, must be so much easier wiring to that and then plugging it in instead of on your back in the passenger footwell trying to tap into the ecu harness.

Serious understatement that This makes it so much easier. And easy to disconnect if ever needed.