Amp channels
Moderators: IMC, Club Staff
- FTOATH
- Grease Monkey
- Posts: 183
- jedwabna poszewka promocja
- Joined: Tue Jul 19, 2011 4:30 pm
- Location: Nowra, NSW
Re: Amp channels
Your not wrong.
- spency
- Mechanic
- Posts: 761
- Joined: Sun Mar 28, 2010 5:00 pm
- Location: Hobart
- Contact:
Re: Amp channels
I'm running alpine.
Type x splits, v12 6", v12 6x91, v12 monoblock running 10" sub also v12
And v12 4 channel amp running the rest with a clarion vrx766vd headunit.
Type x splits, v12 6", v12 6x91, v12 monoblock running 10" sub also v12
And v12 4 channel amp running the rest with a clarion vrx766vd headunit.

- Dras
- Mechanic
- Posts: 584
- Joined: Wed Jul 26, 2006 5:00 pm
- Location: Castle Hill, Sydney
- Contact:
Re: Amp channels
15" 450WRMS EV driver in a 100 litre box, ported to manufacturers specifications driven by a Jaycar 800WRMS amp.
My 6db roll off point is at 40Hz. If the boot was bigger I'd run a 150 litre box to get it down to 20Hz but I am yet to hear an FTO with deeper (not louder) bass.
My 6db roll off point is at 40Hz. If the boot was bigger I'd run a 150 litre box to get it down to 20Hz but I am yet to hear an FTO with deeper (not louder) bass.
Me? Bitter? f**k no. I think it's hilarious.
- spency
- Mechanic
- Posts: 761
- Joined: Sun Mar 28, 2010 5:00 pm
- Location: Hobart
- Contact:
- Dras
- Mechanic
- Posts: 584
- Joined: Wed Jul 26, 2006 5:00 pm
- Location: Castle Hill, Sydney
- Contact:
- FTOATH
- Grease Monkey
- Posts: 183
- Joined: Tue Jul 19, 2011 4:30 pm
- Location: Nowra, NSW
Re: Amp channels
I got so much dubstep. Best dubstep dj is datsik.
- Bennoz
- National President
- Posts: 23676
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: Amp channels
Dubstep makes baby jesus cry.
- spency
- Mechanic
- Posts: 761
- Joined: Sun Mar 28, 2010 5:00 pm
- Location: Hobart
- Contact:
- Kablaamo
- Grease Monkey
- Posts: 170
- Joined: Thu Oct 08, 2009 5:00 pm
- Location: Goodna
Re: Amp channels
Can't say I listen to dubstep either, I'm not after unbelievably loud music playing 

- FTOATH
- Grease Monkey
- Posts: 183
- Joined: Tue Jul 19, 2011 4:30 pm
- Location: Nowra, NSW
Re: Amp channels
I love loud music. I also listen to a lot of older stuff like the doors and creedence clear water revival.
- FTOATH
- Grease Monkey
- Posts: 183
- Joined: Tue Jul 19, 2011 4:30 pm
- Location: Nowra, NSW
- Kablaamo
- Grease Monkey
- Posts: 170
- Joined: Thu Oct 08, 2009 5:00 pm
- Location: Goodna
Re: Amp channels
It's not bad, each to their own
oh and quick question for the sub does it have to e a mono amp or would a 2/1 amp do the same job?

- FTOATH
- Grease Monkey
- Posts: 183
- Joined: Tue Jul 19, 2011 4:30 pm
- Location: Nowra, NSW
Re: Amp channels
I would just get a mono block. Least you know you got a bad ass amp running your sub.
http://www.soundstream-aus.net/uploads/XXX_1500.jpg
That's my bad ass amp running two 12inch soundstream subs.
http://www.soundstream-aus.net/uploads/XXX_1500.jpg
That's my bad ass amp running two 12inch soundstream subs.
- FTOATH
- Grease Monkey
- Posts: 183
- Joined: Tue Jul 19, 2011 4:30 pm
- Location: Nowra, NSW
Re: Amp channels
http://www.soundstream-aus.net/index.html
http://www.vibeaudioaustralia.com.au/
http://www.fusionelectronics.com/region/112/
There my favorite brands. Fusion powerplant range go off. And if you email them saying you like there product and ask for stickers or freebies they send you them
http://www.vibeaudioaustralia.com.au/
http://www.fusionelectronics.com/region/112/
There my favorite brands. Fusion powerplant range go off. And if you email them saying you like there product and ask for stickers or freebies they send you them

- Kablaamo
- Grease Monkey
- Posts: 170
- Joined: Thu Oct 08, 2009 5:00 pm
- Location: Goodna
Re: Amp channels
Damn you stop making me indecisive now it's a toss up between fusion and Sony
- FTOATH
- Grease Monkey
- Posts: 183
- Joined: Tue Jul 19, 2011 4:30 pm
- Location: Nowra, NSW
Re: Amp channels
Do you already have the sony speakers?
- Kablaamo
- Grease Monkey
- Posts: 170
- Joined: Thu Oct 08, 2009 5:00 pm
- Location: Goodna
Re: Amp channels
Not as of yet though the fusion powerplant stuff is fair pricey
- FTOATH
- Grease Monkey
- Posts: 183
- Joined: Tue Jul 19, 2011 4:30 pm
- Location: Nowra, NSW
Re: Amp channels
Just get speakers you can afford. There's always room for upgrades. Im addicted to good sound. All up I have spent 30k on speakers amps etc. To me it's all worth it no regrets. I started off with fusion. You can always go second hand speakers.
- Kablaamo
- Grease Monkey
- Posts: 170
- Joined: Thu Oct 08, 2009 5:00 pm
- Location: Goodna
Re: Amp channels
You make a good point