Error codes.

[spency]

Sup. Checked my engine codes this afternoon and then did a quick search of the forums which didn't help a whole heap. To the point, I received the engine codes 72 and 14. I found the fix for 14 via the search but I'm still stuck on 72. If anybody can post a link to a guide or can give me an outline of what the issue is, in a bit more detail, so I could give it to a mechanic and explain what the problem is.

All help is appreciated.

[I8A4RE]

http://ftoaustralia.com/v3/viewtopic.ph ... 8b70fdf4dd

[Bennoz]

14 Throttle position sensor
72 Ventilation control solenoid valve (TCL)

Sounds to me like you need to thoroughly clean your throttle body...

[spency]

Thanks Simon, had a read of that, was asking how to fix the problem causing the code. As for cleaning the TB, take it out, unplug and soak or clean witha rag/blow out sh*t with a compressor

[Bennoz]

Yeah ^ Its usually crank case oil that gets in there, so a good soak in degreser, pull TPS & stepper off etc & then blow out all the little galleries & lines in on the top of the unit & rag clean the butterfly & surrounding area. See how you go.

Don't forget to disconnect your battery to clear the codes afterwards. See if they come back.

[spency]

Yeah I did that last night, fixed my alarm as well.

[I8A4RE]

Thanks Simon, had a read of that, was asking how to fix the problem causing the code. As for cleaning the TB, take it out, unplug and soak or clean witha rag/blow out sh*t with a compressor

Sorry man misread your question!

[SchumieFan]

make sure the black TCL pipes are actually connected to the TB, they are very easy to rip off when your playing around... should be 3 little black pipes 2 for abs, 1 for TCL with red, green and yellow dots on them respectively