Re: EOI - C's Short Shifter Group Buy

Post by **vipfto** » Sun Oct 24, 2010 9:03 am

Ok after speaing to Mr C this back on people refer here viewtopic.php?f=18&t=20479

will start a new list again and please no payments until we have correct pricing and numbers.
I have spoken to this company and they are very slow to respond to emails (being Japanaese dont think any of them speak english) But they do eventually get back, so with this one you will have to be patient.

Mr C still wants to do this so will leave any enquirys up to him so please direct any PM's to him not me!

1. Mr C
2. vipfto

bduffman · Post by **bduffman** » Sun Oct 24, 2010 7:42 pm

Yay its going ahead
Im keen if I can find the money mums thinking of loaning me another 4k or so on top of the 10 I owe her =( im sure ill work it out

pretty sure kustom was keen to get one to

bass_twitch · Post by **bass_twitch** » Sun Oct 24, 2010 8:30 pm

how much were we looking for one of these?
Would it be a straight forward install?

bduffman · Post by **bduffman** » Sun Oct 24, 2010 8:59 pm

Im asuming its around the same price as befor as its threw the same people

Installing is ment to be pretty easy
pretty sure most the questions were covered in the old thread

Post by **Bennoz** » Mon Oct 25, 2010 1:27 am

bduffman wrote:pretty

It's "pretty" dude

And yeah, maybe 20 mins to fit. Can do it for anyone who needs one done.

Kustom · Post by **Kustom** » Mon Oct 25, 2010 11:35 am

Bennoz wrote:
bduffman wrote:pretty
It's "pretty" dude

And yeah, maybe 20 mins to fit. Can do it for anyone who needs one done.

Sweet, your doing mine then.

BAHAHAHA.

I'm down for EOI atm. It really depends when it is and if I have cash laying around... if its after new years i should be right

mr-charisma · Post by **mr-charisma** » Mon Oct 25, 2010 12:47 pm

I will be in Japan from 22nd November through to 5th December, so if I have enough definites, I might even be able to bring them back in my luggage to save on shipping costs.

Same as before, will be aiming for 10 for the decent discount, happy for people to express their interest, but please only put your name on the list only if you're IN

1.) Mr-C
2.) vipfto

If we don't have the full 10, I will likely pick up the shifters while in Japan & bring back with me.. that is if people are willing to pay the full 'non-discounted' price but save on I'll work out the costs again & post the full landed cost details when I get a spare sec.

Post by **I8A4RE** » Mon Oct 25, 2010 12:53 pm

Bennoz wrote:
bduffman wrote:pretty
It's "pretty" dude

And yeah, maybe 20 mins to fit. Can do it for anyone who needs one done.

Not where he comes from

Shane001 · Post by **Shane001** » Mon Oct 25, 2010 1:05 pm

mr-charisma wrote:I will be in Japan from 22nd November through to 5th December, so if I have enough definites, I might even be able to bring them back in my luggage to save on shipping costs.

Just be careful if bringing these in and the total is over $AU1000 you might get hit for duty & GST. I'd be getting them shipped 4 at a time to be 100% safe.

Shane001 · Post by **Shane001** » Mon Oct 25, 2010 1:18 pm

mm, just read through the previous attempt thread, and this didn't appear to end well...

Will this be run by the club via the club account?

Shane001 · Post by **Shane001** » Tue Oct 26, 2010 10:32 pm

Had a look at my shifter on the racecar tonight, compared it with the one on the halfcut I just bought (which appears stock). Mine is definitely a short shift but nothing like the C's that Ben posted in the previous thread;

Where the 3 bolts are (2 at the top, one at the bottom) mine has 1 inch spacers, lifting the whole assembly. Anyone seen one like this. Doesn't look anything like the RPW one either.

I measured (very roughly) the throw from 1st to 2nd. (removed the gear knob, and with a ruler next to the top of the now exposed gear stick, measured the distance from 1st to 2nd, like I said, pretty rough lol).
On the stock shifter it's about 11 to 12 cm.
On my short shifter it's about 7 to 8cm.

Can someone with a C's shifter measure this on theirs?

I'm undecided whether to go a C's or stick with what I have. It feels pretty good but I have missed third a couple of times on the track... Probably just my poor driving

Post by **Bennoz** » Tue Oct 26, 2010 11:55 pm

Ahhhh... mums table cloth

bduffman · Post by **bduffman** » Wed Nov 03, 2010 3:32 pm

1.) Mr-C
2.) vipfto
3.) bduffman

so whats going on with this

mr-charisma · Post by **mr-charisma** » Wed Nov 03, 2010 9:34 pm

well .. they've put up the price of the Shift kits..

1 = A$ 298.27 (each) Landed
3 = A$ 265.53 (each) Landed
5 = A$ 241.43 (each) Landed
10 A$ 208.74 (each) Landed

As I've said .. I will be in Japan From around the 20th onwards so if it's just going to be the 3 of them, they will be $220 each if I can pick them up while I'm over there..

TBH, Without 10 people interested I will be off the list for a full blown GB.. (as you can see by the prices)

I wouldn't want to be bringing back any more than 3 in luggage (absolute max 5) with the rest of the stuff I have to bring back as well..

Shane001 · Post by **Shane001** » Wed Nov 03, 2010 10:54 pm

Can someone who already has one of these measure the throw please, as per my post above. I'm kind of interested in getting one to compare...

Gholdwayne · Post by **Gholdwayne** » Wed Nov 03, 2010 11:47 pm

I would definitely say -30% normal. I'll bring the ruler to my car tomorrow and see how far it throws. Or maybe a member might beat me to it.

bduffman · Post by **bduffman** » Thu Nov 04, 2010 2:03 am

Yea don't know what happened there was a lot of interest the first time
Well im in for gb if we get 10 and if we don't make 10 by when you leave can you pick one up for me while your there =) cut off date by 15th? So we can transfer the money across so your not out of pocket

naughtika · Post by **naughtika** » Wed Dec 15, 2010 12:12 am

hi fellas.. was just curious if this GB is still going ahead?

may have 2 or more vr4 owners interested in these..

btw, I've compared the shifter from an 8G vr4 and FTO.. they're the same.. length and the bend

bduffman · Post by **bduffman** » Wed Dec 15, 2010 4:48 am

well mr-charisma was going to pick up 3 while in japan but the dealer screwed up so they said they would work some thing out for us but no idea where its at atm you would have to talk to mr-charisma

FTO_GPvR · Post by **FTO_GPvR** » Wed Dec 15, 2010 4:59 pm

Shane001 wrote:Can someone who already has one of these measure the throw please, as per my post above. I'm kind of interested in getting one to compare...

I know its a bit late but oh well... only saw your post now

I just measured mine and i have the C's Short Shifter, the same one in the picture u posted.

From first to second without the gear knob its about 9cm roughly lol. I think your shift from 1st to 2nd is shorter because you have a 1 inch (25.4mm) spacer where as the C's Short Shifter has a 15mm spacer (like the one in the picture). So yours is raised up more resulting in a shorter shift

FTO AUSTRALIA