FTO Australia Scrap Yard
Moderators: IMC, Club Staff
- spency
- Mechanic
- Posts: 761
- jedwabna poszewka promocja
- Joined: Sun Mar 28, 2010 5:00 pm
- Location: Hobart
- Contact:
Re: FTO Australia Scrap Yard
after a GPX manual gearbox, to go into a 1995 model.
-
- Mechanic
- Posts: 664
- Joined: Sun Oct 10, 2010 9:33 pm
- Location: Sydney
Re: FTO Australia Scrap Yard
Looking for a gear shifter bracket... (it holds the pistons that change the gears mine has recently broken) ( i welded it up but i dont know how long itll last. if it breaks again ill only be able to use 1st n 3rd gear again... =[ )
Also looking for a console peice Dstocks said he could get it for me but if i can get it for cheaper than 130+ shipping that would be lovely.
Also looking for a console peice Dstocks said he could get it for me but if i can get it for cheaper than 130+ shipping that would be lovely.
- Halfcast
- Apprentice
- Posts: 37
- Joined: Tue Jul 12, 2011 7:49 pm
Re: FTO Australia Scrap Yard
Looking for stock steering wheel, non airbag. also centre console glovebox between the seats, the box inside.
It's a work in progress..If you don't like it you can buy a vowel
- abeachboi
- Newbie
- Posts: 6
- Joined: Wed Oct 20, 2010 11:05 pm
- Location: Kawana, Sunshine Coast
Re: FTO Australia Scrap Yard
When a friend offers to help work on your car, sometimes it's better to say "No thanks". As a result of their lack of care, I now need to replace the piece of console that begins directly under the air con controls and scoops down to surround the stereo, ashtray and gearstick. As if that wasn't enough, they then connected the battery back-to-front and fried the ECU, so, I need one of those as well! Can anyone help with these items for my '96 GPX or point me in the right direction to find them? I'm located on the Sunshine Coast, Qld. Oh, and just in case you're wondering, a particular friend no longer touches ANYTHING in my car!
- xj265
- Mechanic
- Posts: 778
- Joined: Tue Oct 28, 2008 5:00 pm
- Location: Sunnie Coast
Re: FTO Australia Scrap Yard
PM 'dstocks'
He can get new center consoles (plastic part around the stereo and gearstick)) and may have a spare ECU
He can get new center consoles (plastic part around the stereo and gearstick)) and may have a spare ECU
- FTO-BOY
- Mechanic
- Posts: 454
- Joined: Sat Mar 13, 2010 6:00 pm
- Contact:
FTO Australia Scrap Yard
Seems to be the case of a friend "who thinks he knows best and knows everything".. We all have one of those lol
- aza013
- NSW Coordinator
- Posts: 9088
- Joined: Mon Mar 26, 2007 5:00 pm
- Location: The Shire
- Contact:
Re: FTO Australia Scrap Yard
The part you are after are called a stereo surround, as said above Dstocks can get new ones at a 1/3 the price that Mitsubishi Australia would charge you.
It would not mater who took it off it would have broken no mater what. They get very weak over time.
It would not mater who took it off it would have broken no mater what. They get very weak over time.
- Halfcast
- Apprentice
- Posts: 37
- Joined: Tue Jul 12, 2011 7:49 pm
Re: FTO Australia Scrap Yard
I'm trying to find a cheapish ecu for mivec gpx.
It's a work in progress..If you don't like it you can buy a vowel
- ZFL45H1
- Oldtimer
- Posts: 1830
- Joined: Sun Feb 07, 2010 6:00 pm
- Location: Albury
Re: FTO Australia Scrap Yard
looking for standerd diff as i dont want to listen to the clunking any more
can anyone help pm me
thanks
can anyone help pm me
thanks
- Bennoz
- National President
- Posts: 23673
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: FTO Australia Scrap Yard
I've got one, but you need to find out which one you have. There are 2 main different types.
- ZFL45H1
- Oldtimer
- Posts: 1830
- Joined: Sun Feb 07, 2010 6:00 pm
- Location: Albury
Re: FTO Australia Scrap Yard
ill look at my old one thats destroyed and let u know what are the differences just for thought
- Bennoz
- National President
- Posts: 23673
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: FTO Australia Scrap Yard
There are 2 size driveshafts, one with 25 splines (26.6mm shaft dia) the other is the 27 spline (28.5mm shaft dia)ZFL45H1 wrote:ill look at my old one thats destroyed and let you know what are the differences just for thought
Just throw a vernier or rule etc across the driveshaft end or diff shaft slots.
Also throw a pic up as well, just want to make sure its not a limo diff too. Also auto or manaul?
- ZFL45H1
- Oldtimer
- Posts: 1830
- Joined: Sun Feb 07, 2010 6:00 pm
- Location: Albury
Re: FTO Australia Scrap Yard
ok sweet no worries should get back to u either this afternoon or tomorrow some time and manaul the old one ill post a pic of isnt a limo cause i changed them and the one in the gearbox now look way different dont have a pic
- Bennoz
- National President
- Posts: 23673
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: FTO Australia Scrap Yard
1 x Pre facelift bumper. Has been hit before & has some cracks in the paint. 1 case of beer ono. Pickup from 2763 only.
- payaya
- Oldtimer
- Posts: 3670
- Joined: Sat Sep 06, 2003 5:00 pm
Re: FTO Australia Scrap Yard
Whos got a maf??
- CHR15
- Grease Monkey
- Posts: 120
- Joined: Sun Mar 13, 2011 1:06 pm
- Location: ipswich
Re: FTO Australia Scrap Yard
chasing a bonnet in the brisbane area
- mosti
- Mechanic
- Posts: 500
- Joined: Sun Jan 10, 2010 6:00 pm
- Location: Melbourne
Re: FTO Australia Scrap Yard
Ive taken mine off atleast 5 times. Hasn't broken yet (touch wood). Just gotta have the right touch :paza013 wrote:The part you are after are called a stereo surround, as said above Dstocks can get new ones at a 1/3 the price that Mitsubishi Australia would charge you.
It would not mater who took it off it would have broken no mater what. They get very weak over time.
- Xeno
- Grease Monkey
- Posts: 231
- Joined: Sun Jan 15, 2012 11:06 pm
- Location: Sydney
Re: FTO Australia Scrap Yard
Looking for a stock GPX airbox around Sydney
-
- Apprentice
- Posts: 24
- Joined: Fri Feb 17, 2012 5:43 pm
Re: FTO Australia Scrap Yard
Looking for an Indicator Arm as mine snapped, In VIC 3082.
- aza013
- NSW Coordinator
- Posts: 9088
- Joined: Mon Mar 26, 2007 5:00 pm
- Location: The Shire
- Contact:
Re: FTO Australia Scrap Yard
babybomber13 wrote:Looking for an Indicator Arm as mine snapped, In VIC 3082.
Pm Dstocks he will have the parts, Bennoz could even have one.