Front Swaybar

silverGPX · Post by **silverGPX** » Thu Oct 21, 2010 4:01 pm

Would someone be able to give me a quick run down on how to put a swaybar in, ive got one from dstocks as i currently have NO swaybar lol.

No need for pics just a quick run down.

storm hawk · Post by **storm hawk** » Thu Oct 21, 2010 4:31 pm

You need a floor jack
1 put end of jack on the two bolts under radaitor
2 take of front wheels jack up take off sway bar links from control arms on both sides
3 There is a hole in the bottom of control arm undo the bolt that hold the sub frame to body 17mm socket one on each side, back it off 10mm ,15mm it will fall out but leave in some
4 undo the two bolts on bracket holding back rubber bush Maybe after market red or yellow bush take the bracket wright off both sides this will let you crow bar the control arm down to
5 undo sway bar bushers backet 12mm this is not in a nice place, the bar will come out you have to play with it a bit Have some spare time Its not a rush job Its a bit like the old bull.Best of luck.

silverGPX · Post by **silverGPX** » Thu Oct 21, 2010 6:57 pm

legend! thanks.
A job for this sunday!

Post by **Bennoz** » Sun Oct 24, 2010 2:02 pm

Ugh... sh*t of a job, will take you some time!

silverGPX · Post by **silverGPX** » Wed Jul 18, 2012 9:00 pm

f**k! why did i agree to do this again

So tight to get that f**king spanner in there!

spetz · Post by **spetz** » Wed Jul 18, 2012 9:09 pm

You say you'll do it on Sunday...
Then almost 2 years later...

phi-tec · Post by **phi-tec** » Thu Jul 19, 2012 4:52 am

He's doing mine this time hahaha

spetz · Post by **spetz** » Thu Jul 19, 2012 7:10 am

So it's your name he's cursing there

Should do a write up with pics

phi-tec · Post by **phi-tec** » Thu Jul 19, 2012 8:44 am

haha
I presume he's already taken some already plus gopro footage if he was bothered haha

Post by **Bennoz** » Thu Jul 19, 2012 9:17 am

silverGPX wrote:f**k! why did i agree to do this again

So tight to get that f**king spanner in there!

Gotta drop the subframe mate. The big ass bolt that goes up into the chassis just behind the strut.

Also remove the rear control arm mounting cap bolts, they form part of the subframe mounting as well.

ZFL45H1 · Post by **ZFL45H1** » Thu Jul 19, 2012 2:14 pm

Bennoz wrote:
silverGPX wrote:f**k! why did i agree to do this again

So tight to get that f**king spanner in there!
Gotta drop the subframe mate. The big ass bolt that goes up into the chassis just behind the strut.

Also remove the rear control arm mounting cap bolts, they form part of the subframe mounting as well.

More importantly don't forget to do these up and tight

silverGPX · Post by **silverGPX** » Thu Jul 19, 2012 4:39 pm

I already did all that. :'( i must just of been too tired

Post by **Bennoz** » Thu Jul 19, 2012 4:49 pm

Maybe you need some of what Supplanter prescribes...

FTO AUSTRALIA

Front Swaybar

Front Swaybar

Re: Front Swaybar

Re: Front Swaybar

Re: Front Swaybar

Re: Front Swaybar

Re: Front Swaybar

Front Swaybar

Re: Front Swaybar

Front Swaybar

Re: Front Swaybar

Front Swaybar

Re: Front Swaybar

Re: Front Swaybar