Tried to cut the wires off the connecter to the stock volt meter gauge, and it somehow tripped on something.
Realised the tacho and speedo have no signal at all. I have checked all fuses and it all seems to be working.
the car still starts and go, but i dont know how much rev and how fast im going!
please help!
no signal from tacho and speedo
Moderators: IMC, Club Staff
-
zuihoujueding
- Oldtimer
- Posts: 1980
- jedwabna poszewka promocja
- Joined: Thu Aug 31, 2006 5:00 pm
- Location: Sydney
-
brad_gpx
- Veteran Mechanic
- Posts: 1128
- Joined: Mon Aug 17, 2009 5:00 pm
- Location: central coast
Re: no signal from tacho and speedo
If you put your foot flat and don't shift it will fix itself
-
brad_gpx
- Veteran Mechanic
- Posts: 1128
- Joined: Mon Aug 17, 2009 5:00 pm
- Location: central coast
Re: no signal from tacho and speedo
Also don't do what I say
-
vipfto
- Forum Moderator
- Posts: 4154
- Joined: Mon Oct 29, 2007 5:00 pm
- Location: Adelaide
Re: no signal from tacho and speedo
ha ha you must of cut power to dash too re-connect where you cut then get test light out and be careful what yu do/dont cut 
FTO GR-TURBO
172KW ATW @ 11PSI
172KW ATW @ 11PSI
-
zuihoujueding
- Oldtimer
- Posts: 1980
- Joined: Thu Aug 31, 2006 5:00 pm
- Location: Sydney
Re: no signal from tacho and speedo
the incident blew the fuse and i replaced it but put in the wrong slot! stupid me!
-
Kustom
- Oldtimer
- Posts: 6144
- Joined: Sun Oct 04, 2009 5:00 pm
- Location: Brisbane
