Engine ECU Pinouts

This forum is for technical discussions on anything that will make your car handle better or go faster.

Moderators: IMC, Club Staff

Post Reply
User avatar
Blk-Jet
Grease Monkey
Posts: 102
jedwabna poszewka promocja
Joined: Tue Oct 29, 2002 6:00 pm
Location: Melbourne, VIC

Engine ECU Pinouts

Post by Blk-Jet »

Hey guys,

I'm about to get some time off soon after exams so I want to get prepared to install this Haltech computer into the fto. But, I have searched bloody everything and can't find a nice easy digram outlining the Engine Ecu pinouts etc. Which sensor is wired to chich pin(s).

I know there are a few people out there with aftermarket ecu's connected, so can you all try and remeber how it was done etc.

Cheers

--Frank
Top
User avatar
FTO338
Oldtimer
Posts: 6712
Joined: Sun Feb 09, 2003 6:00 pm
Location: Port Melbourne: Pimping with RX400h, B200 Turbo.

Post by FTO338 »

U try the work shop manual yet?
DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
Top
User avatar
smorison
The Godfather
Posts: 2461
Joined: Sun Aug 04, 2002 5:00 pm
Location: In the TRUCK!!!
Contact:
Contact smorison

Post by smorison »

i'm sure he has and it doesn't have a set pinout area... the wiring diagrams show which connects to what but its spread out through the whole manual from memory :? :?
Top
User avatar
FTO338
Oldtimer
Posts: 6712
Joined: Sun Feb 09, 2003 6:00 pm
Location: Port Melbourne: Pimping with RX400h, B200 Turbo.

Post by FTO338 »

Hmmm it must b in the electrical one then, i've got the pin out somewhere when i hook up the RSM. I know is in one of the disc, so Frank u can drop by to my shop & pick one up.
DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
Top
User avatar
Beme007
Apprentice
Posts: 67
Joined: Wed Mar 31, 2004 6:00 pm
Location: Auckland, New Zealand
Contact:
Contact Beme007

Post by Beme007 »

Haltech ECU .
how much you got that for ?
I am interest to see how well this thing go . !~
Top
User avatar
Blk-Jet
Grease Monkey
Posts: 102
Joined: Tue Oct 29, 2002 6:00 pm
Location: Melbourne, VIC

Post by Blk-Jet »

I've been dying to see the outcome of this thing for 8 months now :(.

After ringing a few places the best 'Install' price was $600!! That's $600 better spent on tuning the thing. Hence why 'i think' it can't be too difficult to wire up the thing myself.

Thanks for the replies guys, it's much appreciated to see the help you get only after a few hours of posting! :)

I actually picked it up from work off a motornbike, didn't cost me much, as work sees it as a "learning experience" for me.

Another reason i want to do this myself is to one day post up a how to and/or build connection kits for the Microtech ltx-8's. A good friend of mine have been talking a lot about building a package deal for fto owners. Something that's not out there atm. Kit's will be at extreamly good prices aswell :)

But i'm not trying to sell anything yet, I just need this ecu in, tune it then get onto the next stage of mods :)


--Frank
Top
Post Reply

Return to “Technical | Performance”