BJ (DRFTO)
Big crack near left pasenger, centre plastic panel...
Moderators: IMC, Club Staff
-
BJ
- Grease Monkey
- Posts: 203
- jedwabna poszewka promocja
- Joined: Fri Mar 26, 2004 6:00 pm
- Location: Victoria - Melbourne
- Contact:
Big crack near left pasenger, centre plastic panel...
Hows everyone going? I just have a issue with a cracked panel, its on the left pasenger side of the centre console, does anyone know who or where i can get a spare part for this, because the crack is getting bigger & its not looking good, thanks so much.
BJ (DRFTO)
BJ (DRFTO)
-
dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: Big crack near left pasenger, centre plastic panel...
Yep, from me. I can get you a brand new one for around $130 + postage.
Complete FTO (http://www.completefto.com.au/completefto.asp) 
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
-
BJ
- Grease Monkey
- Posts: 203
- Joined: Fri Mar 26, 2004 6:00 pm
- Location: Victoria - Melbourne
- Contact:
Re: Big crack near left pasenger, centre plastic panel...
Hey Dwayne, how you been? That will be great, thanks heaps =) Does it come just by itself or in a pair?
What's your account details again? I'll netbank you the amount into your account, is it easy to install?
What's your account details again? I'll netbank you the amount into your account, is it easy to install?
dstocks wrote:Yep, from me. I can get you a brand new one for around $130 + postage.
-
dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: Big crack near left pasenger, centre plastic panel...
Thats only a single piece. The flaps that attach to the side come as 2 pieces. Ill try and get you details soon
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
-
xj265
- Mechanic
- Posts: 778
- Joined: Tue Oct 28, 2008 5:00 pm
- Location: Sunnie Coast
-
bduffman
- Oldtimer
- Posts: 1450
- Joined: Sun Jan 31, 2010 6:00 pm
- Location: gosford
- Contact:
Re: Big crack near left pasenger, centre plastic panel...
yea i had the same issue and dstocks hooked me up with that and sterio surround
and theses things are imported from japan 100% real no cheap nockoffs
and theses things are imported from japan 100% real no cheap nockoffs
-
BJ
- Grease Monkey
- Posts: 203
- Joined: Fri Mar 26, 2004 6:00 pm
- Location: Victoria - Melbourne
- Contact:
Re: Big crack near left pasenger, centre plastic panel...
Thanks so much, i thought it was a separate part, thanks heaps, by the way, is it easy to install? Looks hard....
dstocks wrote:Thats only a single piece. The flaps that attach to the side come as 2 pieces. Ill try and get you details soon
Last edited by BJ on Wed Jun 16, 2010 10:29 am, edited 1 time in total.
-
BJ
- Grease Monkey
- Posts: 203
- Joined: Fri Mar 26, 2004 6:00 pm
- Location: Victoria - Melbourne
- Contact:
Re: Big crack near left pasenger, centre plastic panel...
yep, thats the part, i didn't look at it properly, thought it was the stereo surround, thought it was just one panel but its one big thing, is there any DIY guide on how to install this?
-
dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: Big crack near left pasenger, centre plastic panel...
Only as a part of some of the dash removal guides I have on complete fto. Its really easy though, so you should be able to work it out. Hardest part will be getting the stereo surround out without breaking it.
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
-
BJ
- Grease Monkey
- Posts: 203
- Joined: Fri Mar 26, 2004 6:00 pm
- Location: Victoria - Melbourne
- Contact:
Re: Big crack near left pasenger, centre plastic panel...
Hey dstocks, hows it going? Just wanted to know hows it going with that panel? Sorry if i keep asking. thanks.
BJ (DRFTO)
BJ (DRFTO)
dstocks wrote:Thats only a single piece. The flaps that attach to the side come as 2 pieces. Ill try and get you details soon
-
dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: Big crack near left pasenger, centre plastic panel...
Put the post up yesterday. Have them in stock. Its a floor console you need and I have 2 new ones atm. Im assuming you want dibs on one of them.
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
-
BJ
- Grease Monkey
- Posts: 203
- Joined: Fri Mar 26, 2004 6:00 pm
- Location: Victoria - Melbourne
- Contact:
Re: Big crack near left pasenger, centre plastic panel...
Hey dstocks, of course i've got 1st dibs on them...hehe...please put one aside for me & send it me =) just give me ya account details so i can netback the money to you =) thanks again, by the way whats ya mobile number again?
dstocks wrote:Put the post up yesterday. Have them in stock. Its a floor console you need and I have 2 new ones atm. Im assuming you want dibs on one of them.