Had a flat battery now lots of issues

[Valandis91]

today i was parked and in the car with my missus. i forgot my foglights on the whole time and had drained the battery. Everything would come up even the air conditioning turned on but trying to start the car it made a big clicking sound.
waited awhile tried again nothing.
tried looking around for anything loose. nothing.
tried starting again nothing.
went for a walk still nothing

called a friend jump started the engine and started. Left it idling away to build charge drove off. Everything seemed fine.

Connected up laptop to see emanage was running ok.

Issues are

Greddy MAP Sensor reading that im making boost. Not possible
Connected innovate to emenage and its reading around a constant 10 changing ever so slightly. wrong...
engine seems to be running hot
Interior Mirror lamps not working at all
alarm goes off when armed after a couple of seconds even though evverything is shut properly.
clock doesnt work when engine or ignition off.
air conditioning turns on when u start car] every time even if u turn it off before
car just doesnt seem to run "normally" but that coulld be me just being paranoid with all the other things that have happened.
knock sensor seems to go up at a constant rate on emanage. eventually reading 114% which is like ahhhh wwrong?

HELP!

[Valandis91]

oh and the sensors that say if the doors are open or not doesnt work. as in doesnt show up on the dash.

also the reversing "beep" doesnt sound the same either. changed pitch and volume.

[vipfto]

It seems as though its like your disconnecting battery every time you turn car off.......

Error codes check would be a start

[FTO-BOY]

maybe a fuse?

[Valandis91]

found the issue which fixed most my problems.

In the engine bay fuse box the fuse for the mirror lamp was causing all the havoc as it had blown.
it obviously had a few more things attached to it.

But my pressor sensor in my manifold is reading weird readings.

even when flooring it it can get up to 51psi which is just retarded.
its the greddy one btw not the mitsubishi pressure sensor.

and my AFR on the emanage is just weird. Might email shane

[Valandis91]

oh and engine error codes nil.

Gearbox has an error code though... Eeek!

could explain why sshifts are slow?