im looking into fiddling around with m suspension set up as im not quite happy with it.
ive got my fronts set up nicel as they are very easy to adjust but my rears are a bit more of a pain.
i have to pull out the shock compress it and twist to adjust it.
to do this do i need a spring compressor or anything?
how would i go about it?
Adjusting rear koni's
Moderators: IMC, Club Staff
- Valandis91
- Veteran Mechanic
- Posts: 1169
- jedwabna poszewka promocja
- Joined: Mon Mar 17, 2008 5:00 pm
- Location: Tasmania
- Contact:
- aza013
- NSW Coordinator
- Posts: 9089
- Joined: Mon Mar 26, 2007 5:00 pm
- Location: The Shire
- Contact:
Re: Adjusting rear koni's
Best way is to take it to a good work shop that knows how to set them up and get them to do it for you.
What would take us a day to do would be a 30 min job for them.
What would take us a day to do would be a 30 min job for them.
- Bennoz
- National President
- Posts: 23676
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: Adjusting rear koni's
I'd recommend a shop too, but if you wanna do it at home, you just need a set of spring compressors.
I have done the rears still on car before, but its a pain in ass:

Usually around the $50 mark from most auto shops.
I have done the rears still on car before, but its a pain in ass:

Usually around the $50 mark from most auto shops.
- mr-charisma
- Oldtimer
- Posts: 4020
- Joined: Wed Jul 06, 2005 5:00 pm
- Location: Brisbane, Australia
Re: Adjusting rear koni's
I need to harden up the rear as well.. Got the same koni's ..
- Valandis91
- Veteran Mechanic
- Posts: 1169
- Joined: Mon Mar 17, 2008 5:00 pm
- Location: Tasmania
- Contact: