gpx mivec and non mivec timing belt bearing ?????
Moderators: IMC, Club Staff
-
- Apprentice
- Posts: 29
- jedwabna poszewka promocja
- Joined: Thu Apr 29, 2010 7:32 pm
gpx mivec and non mivec timing belt bearing ?????
are they interchangeable ?
- Bennoz
- National President
- Posts: 23676
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: gpx mivec and non mivec timing belt bearing ?????
Yep, same bearing. MD316826
-
- Apprentice
- Posts: 29
- Joined: Thu Apr 29, 2010 7:32 pm
Re: gpx mivec and non mivec timing belt bearing ?????
what about the bearing on top of the water pump
- Bennoz
- National President
- Posts: 23676
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: gpx mivec and non mivec timing belt bearing ?????
Above the pump or on the pump itself? The one I was referring to was the one above the pump. The idler bearing.
-
- Apprentice
- Posts: 29
- Joined: Thu Apr 29, 2010 7:32 pm
Re: gpx mivec and non mivec timing belt bearing ?????
what about the pump it self and the bearing on the tensioner
- Bennoz
- National President
- Posts: 23676
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: gpx mivec and non mivec timing belt bearing ?????
Pump is generic. Can be bought from any auto shop, ask for HJ galant.
Tensioner is mitsi specific.
Tensioner is mitsi specific.
-
- Apprentice
- Posts: 29
- Joined: Thu Apr 29, 2010 7:32 pm
Re: gpx mivec and non mivec timing belt bearing ?????
is that mean the hj galant water pump are the same ?
is the mivec and non mivec tensioner bearing the same ?
is the mivec and non mivec tensioner bearing the same ?
-
- Apprentice
- Posts: 29
- Joined: Thu Apr 29, 2010 7:32 pm
Re: gpx mivec and non mivec timing belt bearing ?????
and is the water pump for the non and mivec the same ?
- Bennoz
- National President
- Posts: 23676
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: gpx mivec and non mivec timing belt bearing ?????
Water pump is common to all 6Axx series engines. Mivec, Non Mivec doesn't matter.
The bearing on the tensioner is the same too.
The only difference between mivec & non mivec on that end of the motor, is the cam gears & the belts lengths.
The bearing on the tensioner is the same too.
The only difference between mivec & non mivec on that end of the motor, is the cam gears & the belts lengths.
-
- Apprentice
- Posts: 29
- Joined: Thu Apr 29, 2010 7:32 pm