El kick panel help

[rock_it]

Not really a problem, but more of a general question..

The set of kick panels I got have plug still attached to them, instead of having to splice the wires.. So without pulling the car apart as yet... Does anyone know where the plug should go..???

[Dan25]

Kick panels plug into fuse board on driver's side under dash

[rock_it]

Sweet.. So I guess there will be something their labeled for the door light.. Or is their only 1 plug that it will fit into...

[Dan25]

Hmm I'd have to go have a look. I'm quite sure they aren't labeled, but yea I think that there is only one plug they can fit into...

*Goes outside to take photo*

Edit: Ok, so a combination of darkness, mild drunkness and the fact that my car is parked on the side of the road restricted me from being able to get a good look...

I'll try again tomorrow...

[rock_it]

Thanks for going to so much trouble mate.. Really appreciated...

[mr-charisma]

if you don't have the electrical board that the kick panels plug into then you just have to wire them into the door lights..

[dstocks]

I wired mine into the interior lights. Just removed the pilar cover and joined it in there. I think its a green wire with a black stripe from memory

[rock_it]

if you don't have the electrical board that the kick panels plug into then you just have to wire them into the door lights..

I have the electrical board .. With a fuse I think.. So yeah it has the plug to go somewhere, that I haven't looked for as yet...

Yesterday was cleaning all the glue and double sided tape..

I may hook some neon's up to the kick panels as well..

[vipfto]

if you don't have the electrical board that the kick panels plug into then you just have to wire them into the door lights..

This ^

just wire into where switch is

[dstocks]

Problem with the door switch is its earth based from memory (no live wire). Easier to wire into the interior lights in the rear vision mirror.