Help to UK please
Moderators: IMC, Club Staff
- SteveFirth
- Newbie
- Posts: 9
- jedwabna poszewka promocja
- Joined: Mon Mar 29, 2010 5:00 pm
Help to UK please
Hi Guys,
Hope you can help. Following some threads on here a while back, I decided to go for the Haltech Platinum (just to be different to the other UK cars). To cut the story short for now, it is installed but wont start. Turns over but not firing.
Can anyone email me a wiring diagram and a base map to make sure we have the correct start point please?
Or what have we done wrong? Current wiring from source in UK.
Car is a GPX.
Plan is to be racing at Easter so not looking good.
email is shfirth@sky.com
Thanks for your time.
Hope you can help. Following some threads on here a while back, I decided to go for the Haltech Platinum (just to be different to the other UK cars). To cut the story short for now, it is installed but wont start. Turns over but not firing.
Can anyone email me a wiring diagram and a base map to make sure we have the correct start point please?
Or what have we done wrong? Current wiring from source in UK.
Car is a GPX.
Plan is to be racing at Easter so not looking good.
email is shfirth@sky.com
Thanks for your time.
- I8A4RE
- QLD Coordinator
- Posts: 9594
- Joined: Mon Aug 28, 2006 5:00 pm
- Location: BOOSTIN in front of you
- Contact:
Sorry mate im no help with the tuning, but just clarifing, you do have spark and fuel?
CHRISTIANITY: The belief that a cosmic Jewish Zombie who was his own father can make you live forever if you symbolically eat his flesh and telepathically tell him you accept him as your master, so he can remove an evil force from your soul that is present in humanity because a rib-woman was convinced by a talking snake to eat from a magical tree...
- Bennoz
- National President
- Posts: 23676
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Sorry Steve, I never got back to you
Aza013 will be along shortly, he'll be able to email you his map.
Here's the wiring diagram I've got. You can also post on the Haltech forum too, more than likely it will be Scott that will reply. He knows his stuff.
http://forums.haltech.com/


Aza013 will be along shortly, he'll be able to email you his map.
Here's the wiring diagram I've got. You can also post on the Haltech forum too, more than likely it will be Scott that will reply. He knows his stuff.
http://forums.haltech.com/

- aza013
- NSW Coordinator
- Posts: 9089
- Joined: Mon Mar 26, 2007 5:00 pm
- Location: The Shire
- Contact:
- SteveFirth
- Newbie
- Posts: 9
- Joined: Mon Mar 29, 2010 5:00 pm
Help to UK please
Thanks for prompt answers.
Yes, everything was working just fine. Took the AFC that I fitted out and wired in the Haltech and nothing. So pretty sure it is the Haltech.
That diagram looks the same but I will double check.
Base map would be great.
ta
Yes, everything was working just fine. Took the AFC that I fitted out and wired in the Haltech and nothing. So pretty sure it is the Haltech.
That diagram looks the same but I will double check.
Base map would be great.
ta
- aza013
- NSW Coordinator
- Posts: 9089
- Joined: Mon Mar 26, 2007 5:00 pm
- Location: The Shire
- Contact:
- aza013
- NSW Coordinator
- Posts: 9089
- Joined: Mon Mar 26, 2007 5:00 pm
- Location: The Shire
- Contact:
- SteveFirth
- Newbie
- Posts: 9
- Joined: Mon Mar 29, 2010 5:00 pm
Help to UK please
Hi,
Yep, got that.
Many thanks guys. Fingers crossed now.
After my year of problems I am hoping to get my 1/4 mile champ hat back from Don.
I will keep you posted.
ttfn
Steve
Yep, got that.
Many thanks guys. Fingers crossed now.
After my year of problems I am hoping to get my 1/4 mile champ hat back from Don.
I will keep you posted.
ttfn
Steve
- SteveFirth
- Newbie
- Posts: 9
- Joined: Mon Mar 29, 2010 5:00 pm
Help to UK please
Hi again,
That diagram is the generic one. Not for the FTO. Anyone got one for the 6A12?
That diagram is the generic one. Not for the FTO. Anyone got one for the 6A12?
- aza013
- NSW Coordinator
- Posts: 9089
- Joined: Mon Mar 26, 2007 5:00 pm
- Location: The Shire
- Contact:
- SteveFirth
- Newbie
- Posts: 9
- Joined: Mon Mar 29, 2010 5:00 pm
Help to UK please
No worries for the diagram. Garage man spoke direct to Haltec this morning I think and he is "hopeful" that it will be ok when he gets to it this afternoon.
Would be nice for my own records if you do find it sometime so that I can help any other UK guys that follow me.
Would be nice for my own records if you do find it sometime so that I can help any other UK guys that follow me.
- SteveFirth
- Newbie
- Posts: 9
- Joined: Mon Mar 29, 2010 5:00 pm
help
She lives........
Just need the weather to clear up for easter now see what she runs like.
Thanks
Just need the weather to clear up for easter now see what she runs like.
Thanks
- aza013
- NSW Coordinator
- Posts: 9089
- Joined: Mon Mar 26, 2007 5:00 pm
- Location: The Shire
- Contact:
- Bennoz
- National President
- Posts: 23676
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
- koolio1234
- Oldtimer
- Posts: 2574
- Joined: Sat Oct 04, 2008 5:00 pm
- Location: Western Sydney
- Contact:
Re: help
pissing down rain?Bennoz wrote:What was the issue?SteveFirth wrote:She lives........
Just need the weather to clear up for easter now see what she runs like.
Thanks

[img]http://i710.photobucket.com/albums/ww104/thekrevolution/FTOFINALSIGNATUREcopy.png[/img]
- aza013
- NSW Coordinator
- Posts: 9089
- Joined: Mon Mar 26, 2007 5:00 pm
- Location: The Shire
- Contact:
- SteveFirth
- Newbie
- Posts: 9
- Joined: Mon Mar 29, 2010 5:00 pm
Re: help
Yep. Living in the north does have its issues. Wont change it though. And being a fisherman, a bit of rain is always good. Just not this sunday please.koolio1234 wrote:pissing down rain?Bennoz wrote:What was the issue?SteveFirth wrote:She lives........
Just need the weather to clear up for easter now see what she runs like.
Thanks