Hey guys
I've been noticing oil in my intake pipe and in my throttle body.
As a result I purchased a oil catch can but can't figure out how to install it.
Any one got experience and knowledge
HELP oil Catch Can Install
Moderators: IMC, Club Staff
- qtrgpx1
- Newbie
- Posts: 13
- jedwabna poszewka promocja
- Joined: Tue Aug 26, 2008 5:00 pm
- Location: VIC, SE Suburbs
- nvr2low
- Oldtimer
- Posts: 1601
- Joined: Thu Apr 05, 2007 5:00 pm
hey mate the pipe that comes off the block of the motor into the air intake pipe u take that pipe an put it to the catch can. Then put a breather filter on the oil catch can.
Then you have to block off the pipe on the air intake or make a custom one yourself.
A oil catch can has to inputs one is for oil in one is for breather filter.
hope that helps mate i would get some pics if i have time 2morow.
Then you have to block off the pipe on the air intake or make a custom one yourself.
A oil catch can has to inputs one is for oil in one is for breather filter.
hope that helps mate i would get some pics if i have time 2morow.
- zuihoujueding
- Oldtimer
- Posts: 1980
- Joined: Thu Aug 31, 2006 5:00 pm
- Location: Sydney