WTB: Suspension bushes + steering reck

kosto · Post by **kosto** » Sat Jan 10, 2009 2:27 am

Hi i went pedders and got my suspension checked and they said i need new lower bushes on the front and that the steering reck boot is split.does anyone know where i can get these parts

Robbie · Post by **Robbie** » Sat Mar 07, 2009 11:25 pm

Same. Exactly the same...

nikhan · Post by **nikhan** » Sun Mar 08, 2009 12:28 am

For the bushes try camskill. As for the steering rack boot i reckon u go yo yeah mech they can replace it for u.

Post by **vipfto** » Sun Mar 08, 2009 7:50 am

bushes camskill get the anti-lift ones

but they need to be press fit

rack boots can get universal ones or car specefic ones from repco etc, should be same as galant, as for fitting relativly easy just need to remove tie rod end (count turns) pull old boot off/ new one on, tie it up then reassemble (counting turns of tie rod end)

then get wheel alignment as toe will be affected esp if you got the counting of turns wrong

@ robbie if ya need i'm here to help

Post by **Bennoz** » Sun Mar 08, 2009 6:08 pm

The bushes Camskill sell are Superpro - which are made in Australia

You can get your local auto shop to order them in. Part numbers are in the suspension thread in the Tech Performance section.

Robbie · Post by **Robbie** » Sun Mar 08, 2009 7:03 pm

i think the mechanic has fixed it now. but i didnt get a chance to speak to him to see what exactly he did... i need to get the car up on a hoist to see. but yeah, i dont have one of those handy in the garage.

Cheers dude, il definitely give you a shout sometime...