Bent Steering Rack and Suspension..
Moderators: IMC, Club Staff
- MR2YEN
- Grease Monkey
- Posts: 253
- jedwabna poszewka promocja
- Joined: Tue Feb 19, 2008 6:00 pm
- Location: Sydney > West
Bent Steering Rack and Suspension..
Just had an accident when i ran up the curb with my front left wheel and the rim is totally buckled. Changed it to the space saver and noticed the wheel has been bent back so the wheels are no longer aligned and there's bad squealing when i drive. Its been towed away to smash repairs at Wetherill Park. I think i might be the steering rack and more. Would this cost a lot to fix?
- vipfto
- Forum Moderator
- Posts: 4154
- Joined: Mon Oct 29, 2007 5:00 pm
- Location: Adelaide
prob lower control arm mate possibly strut but not as likely to push the wheel back, squeeling could be few things from bearing to simple backing plate on disc
i doubt you would bend chassis to put wheel back unless you hit it at some real speed
prob put out of alignment but also doubt rack is bent too
if just control arm then not to expensive
i doubt you would bend chassis to put wheel back unless you hit it at some real speed
prob put out of alignment but also doubt rack is bent too
if just control arm then not to expensive
FTO GR-TURBO
172KW ATW @ 11PSI
172KW ATW @ 11PSI
- vipfto
- Forum Moderator
- Posts: 4154
- Joined: Mon Oct 29, 2007 5:00 pm
- Location: Adelaide