Thinking of turboing. But need an estimate on prices!

koolio1234 · Post by **koolio1234** » Mon Dec 01, 2008 12:28 pm

I cant stop laughing at this thread either

10k limit credit cards are meant to help you dig your grave. Stay eN/A, thats the way to go.....turbo will always be there for you in the future if you got the money saved up then.

Post by **aza013** » Mon Dec 01, 2008 4:42 pm

if you want a faster car get this one its all done for you and at a great price to

http://www.ftoaustralia.com/modules.php ... ic&t=13301

xSlurpee · Post by **xSlurpee** » Mon Dec 01, 2008 6:59 pm

ok i decided what to do! ... i asked mum and i thought she might of been abit more generous but no she said "gtfo"

looks like i just gotta ignore some rich kids ...

not being able to turbo my fto has given me more determination on modifying her! ... talk about determination? i took off my front bar with a monkey wrench ... yup took me nearly 2hours again. *wished i had a rachet*

Post by **aza013** » Mon Dec 01, 2008 7:06 pm

xSlurpee wrote:ok i decided what to do! ... i asked mum and i thought she might of been abit more generous but no she said "gtfo"

looks like i just gotta ignore some rich kids ...

not being able to turbo my fto has given me more determination on modifying her! ... talk about determination? i took off my front bar with a monkey wrench ... yup took me nearly 2hours again. *wished i had a rachet*

well I think your first mod would be to get your self some tools and then look at what you can do to your car.

zuihoujueding · Post by **zuihoujueding** » Tue Dec 02, 2008 11:28 am

10x better off to invest in good quality tools. GOOD QUALITY tools, not those whole spanner set for $19.90!!!

koolio1234 · Post by **koolio1234** » Tue Dec 02, 2008 12:46 pm

zuihoujueding wrote:10x better off to invest in good quality tools. GOOD QUALITY tools, not those whole spanner set for $19.90!!!

Cheaper isnt always that bad....but point taken. I built my uni kit car project with a $50 tool set. haha...still works.

xSlurpee · Post by **xSlurpee** » Tue Dec 02, 2008 1:17 pm

i bought a 6.90$ 40 piece rachet set ... the heads on it feel like playdoh

koolio1234 · Post by **koolio1234** » Tue Dec 02, 2008 1:25 pm

xSlurpee wrote:i bought a 6.90$ 40 piece rachet set ... the heads on it feel like playdoh

Are you sure it wasn't a fisher and paykel playdoh mechanic set?

JOeJOe · Post by **JOeJOe** » Tue Dec 02, 2008 2:13 pm

I have a $20 set if anyone wants it. The rachet does't work properly anyone, but it still works.

Charlie, if you want it then I'l give it to you when I pick up the UAS kit.

Post by **I8A4RE** » Tue Dec 02, 2008 2:19 pm

Snap On FTW!!!!

Post by **Bennoz** » Tue Dec 02, 2008 4:56 pm

I8A4RE wrote:Snap On FTW!!!!

Snap On for the mortgage! Set of 8 rings spanners cost me $300!

You can good mid range stuff like Kincrome.

xSlurpee · Post by **xSlurpee** » Tue Dec 02, 2008 5:49 pm

JOeJOe wrote:I have a $20 set if anyone wants it. The rachet does't work properly anyone, but it still works.

Charlie, if you want it then I'l give it to you when I pick up the UAS kit.

its cool joe, no need ... i dont do much work on my car yet

Post by **I8A4RE** » Tue Dec 02, 2008 6:01 pm

Bennoz wrote:
I8A4RE wrote:Snap On FTW!!!!
Snap On for the mortgage! Set of 8 rings spanners cost me $300!

You can good mid range stuff like Kincrome.

Yeah I only could afford snapon as a apprentice, cause i could put it on tick.

There are lots of quality brands now days and a lot with life time warranty's which was the attraction to snap on back in the day.

Post by **vipfto** » Tue Dec 02, 2008 6:21 pm

yeah i just kitted my self out with tools here lastweek
cost just over 600 for kinchrome sockets and spanners

J · Post by J » Thu Dec 11, 2008 2:55 pm

bahaaha how did i miss this thread? Good read

Wanna share some of that illegal sh*t simon? Im told when paying people back im vey ''generous''

bahaha

Charlie.... You never learn... Your like a kid in a candy store ''mum can i have this? Ooh ooh ooh what about this? But you promised!!! *tantrum time*