Azas new airbox

Post by **dstocks** » Tue Nov 04, 2008 10:20 pm

Been spending a bit of time building an airbox for Aza. Thought id chuck up a few pictures. Is 2 layers of sheet metal with insulating foam inbetween (Similar to the one I built for myself not too long ago). Needs a good poilsh (or paint) yet, but then thats what Aza excells at

Post by **I8A4RE** » Tue Nov 04, 2008 10:36 pm

looks AWESOME.

Taeivon_Rep · Post by **Taeivon_Rep** » Wed Nov 05, 2008 12:42 am

hey where's my wallet...
i'll take one if u wanna make one

koolio1234 · Post by **koolio1234** » Wed Nov 05, 2008 3:00 am

hey dstocks how much for you to make one for meeee? i currently have some simple plasticy heat shields which arent as good as that airbox you made for aza. would you make one for me ready to install on diy day?

rock_it · Post by **rock_it** » Wed Nov 05, 2008 7:36 am

Thats a G/B I'd get in on .... C'mon Dstocks ... Help a brother out ... Hehehehe

oodLes · Post by **oodLes** » Wed Nov 05, 2008 8:17 am

Soon: Dwaynes FTO Service Centre where he fixes everyones cars and fabricates parts for them

Post by **dstocks** » Wed Nov 05, 2008 12:43 pm

The problem I have at the moment is the sheer amount of time one of them takes to make. There is about 15 hours work in what you see there. Probably not quite so much if I was to do it again as I have kept a template (although I havent done a tip setup yet - that would need to be different). I could do the outside box in a reasonable timeframe maybe. Its the inside thats a bitch. Maybe I could just line it with foam and leave it at that. Im also doing it with a pair of hand held tin snips, so that slows me down a bit too. Ill think on it......

Richy · Post by **Richy** » Wed Nov 05, 2008 2:20 pm

The problem I have at the moment is the sheer amount of time one of them takes to make. There is about 15 hours work in what you see there. Probably not quite so much if I was to do it again as I have kept a template (although I havent done a tip setup yet - that would need to be different). I could do the outside box in a reasonable timeframe maybe. Its the inside thats a bitch. Maybe I could just line it with foam and leave it at that. Im also doing it with a pair of hand held tin snips, so that slows me down a bit too. Ill think on it......

send some cad plans to Yang and see if he could some chinese factory to fabricate them....for %50....

Post by **aza013** » Wed Nov 05, 2008 6:29 pm

that looks great

thanks mate

also I should be able to finish your air intake manafold this weekend.

Jamie · Post by **Jamie** » Wed Nov 05, 2008 8:40 pm

Looks really good. Nice work. I wouldnt mind one myself. Maybe not such a good idea to place screwdrivers on your battery though

Post by **dstocks** » Wed Nov 05, 2008 9:13 pm

Maybe not such a good idea to place screwdrivers on your battery though

Yeah, have a habit of doing that im afraid

. Have caused an arc or 2 as a result.

jonowong · Post by **jonowong** » Wed Nov 05, 2008 10:16 pm

dstocks wrote:
Maybe not such a good idea to place screwdrivers on your battery though
Yeah, have a habit of doing that im afraid . Have caused an arc or 2 as a result.

ahahahaha i punched a hole through my aircon pipe from a spark

AMACHA · Post by **AMACHA** » Wed Nov 05, 2008 10:31 pm

make me one please!

aza can i buy the one your getting from the UAS gorup buy please

Post by **aza013** » Fri Nov 07, 2008 5:40 pm

AMACHA wrote:make me one please!

aza can i buy the one your getting from the UAS gorup buy please

I will have two to sell soon

so when I am ready to get rid of them I will post them up and the best price will get it.

AMACHA · Post by **AMACHA** » Fri Nov 07, 2008 8:21 pm

aza013 wrote:
AMACHA wrote:make me one please!

aza can i buy the one your getting from the UAS gorup buy please
I will have two to sell soon so when I am ready to get rid of them I will post them up and the best price will get it.

Oh ok then make sure you let me know though when there for sale i dont want it to slip away.