Anyone have a Veilside Kit?

kizl · Post by **kizl** » Fri Oct 24, 2008 10:19 pm

Hi,

I am thinking about buying a Veilside kit for my '95 GPX, however I'm hoping for the feedback from anyone who already has one.

I had one on my last car - an MY99 WRX, and I had no end of trouble with it. The car wasn't lowered, however it kept on grounding out as it was that much lower that the original front. It was also too low to easily get onto the back of a tow truck - they couldn't put the ramp down flat on the ground as the angle was too much to get the wheels to the ramp before the bottom of the front hit the ramp. They had to hover the ramp about 5 cm off the ground and put a plank of wood on the ground to drive onto so that I could get on to the truck. Also, at one point I needed to be toed using the tow rope, and the Veilside kit completely obstructed the loop. I had to take off the whole front bumper just to get toed to the repair centre.

I hated that car, but I have my suspicions that if I hadn't have had the Veilside kit installed, I'd have been much happier with it. I don;t want the same headaches with the FTO.

So anyone that has one installed, please let me know what you think about it. Have you expererienced any of the same problems? Can you still use the tow loop?

Cheers.

Andy

AMACHA · Post by **AMACHA** » Fri Oct 24, 2008 10:36 pm

go to the subforum Styling and go to the topic My New Ride. There are pics of my car i jsut put a veilside front with some topmix sideskirts.

Post by **BorepYano** » Sat Oct 25, 2008 1:13 am

i believe dstock's site has a thingo that you can check what the fto would look like with certain body kits on

i dont actually remember what the URL for the site is but you can search for it or... someone else will come along and tell you...

oh a different note... i'm back to my drunken post whoring agian lol

Post by **I8A4RE** » Sat Oct 25, 2008 10:12 am

If you put a body kt on, you will have the same drama's as your wrx. However, they are not hard to remove, i can remove my front bar in about 5 mins. So if you ever need to get it towed just take it off

As for getting up gutters etc, its all about technique but if you cant be bothered with that then i suggest you dont get one fitted as it will decrease the clearence

Hope that sheds some light

Post by **aza013** » Sat Oct 25, 2008 10:22 am

also the front lip comes off with about 4-8 bolts/srews and then it would have more clearance than a standard bar.

shaunyandclay · Post by **shaunyandclay** » Sun Oct 26, 2008 7:45 pm

[hey mate clayton here yes we have a veilside kit on our 1994 fto gr and it looks stunning you will be looking at around 1500-2000 dollars for the whole kit (frount side and rear) price up some bodykit places and they should be able to help you out.
paint and fit is a killer so be careful who you choose.

also i have a question for you????
our fto on start up sounds real ruff and feels like it wants to stall and driving it hesitates when i put the foot down ive replaced the plugs but do you think it could be the leads????
please help....

Post by **vipfto** » Sun Oct 26, 2008 7:52 pm

shaunyandclay wrote:[hey mate clayton here yes we have a veilside kit on our 1994 fto gr and it looks stunning you will be looking at around 1500-2000 dollars for the whole kit (frount side and rear) price up some bodykit places and they should be able to help you out.
paint and fit is a killer so be careful who you choose.

also i have a question for you????
our fto on start up sounds real ruff and feels like it wants to stall and driving it hesitates when i put the foot down ive replaced the plugs but do you think it could be the leads????
please help....

quite possibly mate also try replacing fuel filter too and maybe injector clean

SG · Post by SG » Sun Oct 26, 2008 10:10 pm

The veilside kit looks like ass from the back i reckon. Unless you look at it from far away.. I took my veilside bumper off yesterday and put a standard one back on.

pete_gpx · Post by **pete_gpx** » Mon Oct 27, 2008 12:32 am

shaunyandclay wrote:[hey mate clayton here yes we have a veilside kit on our 1994 fto gr and it looks stunning you will be looking at around 1500-2000 dollars for the whole kit (frount side and rear) price up some bodykit places and they should be able to help you out.
paint and fit is a killer so be careful who you choose.

also i have a question for you????
our fto on start up sounds real ruff and feels like it wants to stall and driving it hesitates when i put the foot down ive replaced the plugs but do you think it could be the leads????
please help....

http://firesport.com.au/fto-veilside-bo ... 122427.htm

$695
Hmm, wonder how much it would cost for postage to QLD...

kizl · Post by **kizl** » Mon Oct 27, 2008 6:54 am

pete_gpx wrote: http://firesport.com.au/fto-veilside-bo ... 122427.htm

$695
Hmm, wonder how much it would cost for postage to QLD...

I saw that. There is another thread on here that mentions it too. But... The ad expired 125 days ago so there is no guarantees that it is there any more (they don't say how many they have). Also, that doesn't look like the Veilside side bar that I had on my WRX. Is that a Veilside side bar???

pete_gpx · Post by **pete_gpx** » Mon Oct 27, 2008 2:03 pm

kizl wrote:
pete_gpx wrote: http://firesport.com.au/fto-veilside-bo ... 122427.htm

$695
Hmm, wonder how much it would cost for postage to QLD...
I saw that. There is another thread on here that mentions it too. But... The ad expired 125 days ago so there is no guarantees that it is there any more (they don't say how many they have). Also, that doesn't look like the Veilside side bar that I had on my WRX. Is that a Veilside side bar???

You're right, I didn't even notice. Those are Topmix side skirts...

Dodgey.

Post by **I8A4RE** » Mon Oct 27, 2008 6:10 pm

Guys those are VS side skirts. Topmix have just replicated them. They are actually the VS1 skirt.

pete_gpx · Post by **pete_gpx** » Tue Oct 28, 2008 2:38 am

I8A4RE wrote:Guys those are VS side skirts. Topmix have just replicated them. They are actually the VS1 skirt.

Ha, I did not know that. I've only ever seen those style skirts tagged as Topmix. Learn something new every day...

Post by **I8A4RE** » Tue Oct 28, 2008 8:27 am

pete_gpx wrote:
I8A4RE wrote:Guys those are VS side skirts. Topmix have just replicated them. They are actually the VS1 skirt.
Ha, I did not know that. I've only ever seen those style skirts tagged as Topmix. Learn something new every day...

Mate not many people do. But when you look on the topmix site, even the code for those side skirts starts VS1.

biglinz · Post by **biglinz** » Tue Oct 28, 2008 12:10 pm

anybody interested in a fto (factory ???) front and sides kit unpainted got them when i got my fto.

da_msta_chizz · Post by **da_msta_chizz** » Tue Oct 28, 2008 4:45 pm

SG wrote:The veilside kit looks like ass from the back i reckon. Unless you look at it from far away.. I took my veilside bumper off yesterday and put a standard one back on.

+1.

FTO AUSTRALIA

Anyone have a Veilside Kit?

Anyone have a Veilside Kit?

Re: Anyone have a Veilside Kit?

Re: Anyone have a Veilside Kit?

Re: Anyone have a Veilside Kit?

Re: Anyone have a Veilside Kit?

Re: Anyone have a Veilside Kit?