Please help i need to find this member!!! (Thanks guys!!)

gr_fto_reborn · Post by **gr_fto_reborn** » Sun Jul 08, 2007 4:20 am

I have purchaced The lambo doors and the person i got them from stated that they came from this car. I am not sure this is the fact as i can not seem to get them to fit and i would really like this "possible" members help in the matter. Any help would be much appreciated.

This the car that the kit i have got was taken from.

Any help would be much appreciated. Please excuse any irregualarity in the time i send my messages as i am in the UK.

Many thanks in advance
Greg

FtoSam · Post by **FtoSam** » Sun Jul 08, 2007 11:54 am

Have not seen it...

So probably another state... From the numberplates, i'd say Victoria.

Do you know which state they came from?

You should have a name for the person you were dealing with?

Other than that, Im looking into lambo doors too.. From what i know they're a prick to get.

FTO338 · Post by **FTO338** » Sun Jul 08, 2007 7:48 pm

The car in the picture is Franky's old car. He comes on once every 6mths if you lucky.

I must say that lambo door was one of the poorest kit i've seen, the doors just don't close properly. It was base on a modify Civic lambo door kit.

gr_fto_reborn · Post by **gr_fto_reborn** » Mon Jul 09, 2007 2:07 am

When you say they didnt close properly is that because right at the front of the door (close to the wing) the door was pushed out away from the side of the car. That is exactly what is happening with the kit on my car. if so i feel it is safe to assume i have his old kit then.

If anybody knows of any way i could contact him that would be extreamly helpful.

Post by **BorepYano** » Mon Jul 09, 2007 2:14 pm

think thats the problem simon (I8AFRE, he's still around but is still being a little girl about a dispute he had a while ago with sublime and the moderators so he doesnt come on the forum lol) had when he tried to design a lambo door kit for the FTO.
think the only way u can fix it is to roll your front quarter panels back heaps (which i assume will cost u heaps because u'll have to get someone to custom make somethign up to seal the hole up.

sry, not being much help

gr_fto_reborn · Post by **gr_fto_reborn** » Wed Oct 01, 2008 7:10 am

thought i would revive this post. i wasnt too sure if i had let you guys know about my success getting these on. I had to cut the hing in 3 places and re-weld it. then get them milled out and pannel beat my wings out and loose the side repeaters to get them to fit. they close perfectly now and i love them had the on for around 5 months!!!!! so i would like to thank all the members that helped me. thanks!!

and also got a new toy for her.

nvr2low · Post by **nvr2low** » Wed Oct 01, 2008 9:10 am

hey that is 3 people now that are doing this conversion haha if only you lived in aus we could all have a motor transplant diy day haha

harry90 · Post by **harry90** » Wed Oct 01, 2008 10:14 am

That looks hot

da_msta_chizz · Post by **da_msta_chizz** » Wed Oct 01, 2008 12:09 pm

harry90 wrote:That looks hot

+1.

Gonna go nice and fast too with the 6A13..

gr_fto_reborn · Post by **gr_fto_reborn** » Thu Oct 02, 2008 5:06 am

the_msta_chizz wrote:
harry90 wrote:That looks hot
+1.

Gonna go nice and fast too with the 6A13..

i hope so

SILVERFISH · Post by **SILVERFISH** » Thu Oct 02, 2008 7:31 pm

what is that rear bar... and where can i get one????

Tippin · Post by **Tippin** » Thu Oct 02, 2008 7:33 pm

SILVERFISH wrote: what is that rear bar... and where can i get one????

its a d cuatro bar blended in

da_msta_chizz · Post by **da_msta_chizz** » Thu Oct 02, 2008 8:50 pm

this one if i'm not mistaken?
http://www.jdmperformance.co.uk/item_de ... prodID=935

Ezza · Post by **Ezza** » Fri Oct 03, 2008 12:24 am

v.nice

gr_fto_reborn · Post by **gr_fto_reborn** » Fri Oct 03, 2008 6:05 am

tippin9 wrote:
SILVERFISH wrote: what is that rear bar... and where can i get one????
its a d cuatro bar blended in

No sorry guys its a standerd bumper that has been slightly customized. Not Decuattro. Similar but not!

decuattro

mine!

SILVERFISH · Post by **SILVERFISH** » Fri Oct 03, 2008 7:11 pm

gr_fto_reborn wrote:No sorry guys its a standerd bumper that has been slightly customized.
Not Decuattro. Similar but not!

had a feeling that was the case, the DC rears i've seen don't look as good as your custom version

nice work, looks great

Tippin · Post by **Tippin** » Fri Oct 03, 2008 9:04 pm

looks awesome with the topmix spoiler

cant wait to get mine fitted

gr_fto_reborn · Post by **gr_fto_reborn** » Sat Oct 04, 2008 2:32 am

thank you for the comments guys.

Tippin. when you fit your topmix be carfull when fitting the blade i broke my supports doing that

Tippin · Post by **Tippin** » Sat Oct 04, 2008 5:00 am

ohh ok, well il make sure i tell the guy thats fitting my kit that

thanx

gr_fto_reborn · Post by **gr_fto_reborn** » Sat Oct 04, 2008 5:23 am

he will probly be ok then i fitted mine! never done anything other then change the oil on a car before! that lol