DIY Day sat the 22nd November start time 9am

zuihoujueding · Post by **zuihoujueding** » Mon Sep 22, 2008 9:26 pm

I got that broken as well! looks exactly the same!

poahfto · Post by **poahfto** » Sat Sep 27, 2008 2:36 pm

Slurpeee can you doo the brake light FTO logo for me

xSlurpee · Post by **xSlurpee** » Sat Sep 27, 2008 3:35 pm

easy ... i got a templet and just gotta buy some black cardboard papers from newsagents and cut it out the same lol

*thats IF I FIND A WAY to get to this D.I.Y day lol*

poahfto · Post by **poahfto** » Sun Sep 28, 2008 3:42 pm

hmmm, do you have any mates that are on there p's or anything that will be willing to take u and your FTO?

poahfto · Post by **poahfto** » Sun Sep 28, 2008 3:50 pm

oh and btw on the day since im doing my angel eyes n mucking around with my headlights, does anyone know how to make your headlights clearer and remove those little scratches??

Post by **aza013** » Sun Sep 28, 2008 7:44 pm

poahfto wrote:oh and btw on the day since im doing my angel eyes n mucking around with my headlights, does anyone know how to make your headlights clearer and remove those little scratches??

yep that can be done

I have got a line up of cars on the day but I can fit another one in

poahfto · Post by **poahfto** » Sun Sep 28, 2008 10:41 pm

yayy!!

syked!

btw very noob question but where is the DIY day happening?

nicholas · Post by **nicholas** » Sun Sep 28, 2008 10:46 pm

Aza, what's the cost bud? How many beers required per headlight?

xSlurpee · Post by **xSlurpee** » Mon Sep 29, 2008 12:06 am

JoeJoe - shocks & springs
Kazbah - shocks (possibly) full car detail by the noobs. Definately need rear engine mounts too
MR2YEN - CAI, engine mounts, plugs, polish headlights
elusi0n - Headlights
Sublime - Dials
xSlurpee - Install HIDS, Install angel eyes, Polish headlights, Install UAS CAI (if available)
gpat - Plugs, service, brake pads
bushido - CAI
poahfto - Angel eyes, brake pads (if not already done). mivec cover (if not already done), Tint my taillights and backpanel (if not already done).
Topao - Shocks, Engine Mounts??? This ones prob a stretch but how about Front Sway Bar??
Rock_it - Replace brake master ... Pads if not done this weekend too

just a little update ...

poahfto · Post by **poahfto** » Mon Sep 29, 2008 12:25 am

JoeJoe - shocks & springs
Kazbah - shocks (possibly) full car detail by the noobs. Definately need rear engine mounts too
MR2YEN - CAI, engine mounts, plugs, polish headlights
elusi0n - Headlights
Sublime - Dials
xSlurpee - Install HIDS, Install angel eyes, Polish headlights, Install UAS CAI (if available)
gpat - Plugs, service, brake pads
bushido - CAI
poahfto - Angel eyes, Pant brake calipers , Tint my taillights and backpanel, install CAI, sex up headlights
Topao - Shocks, Engine Mounts??? This ones prob a stretch but how about Front Sway Bar??
Rock_it - Replace brake master ... Pads if not done this weekend too

xSlurpee · Post by **xSlurpee** » Mon Sep 29, 2008 1:04 am

poahfto wrote:JoeJoe - shocks & springs
Kazbah - shocks (possibly) full car detail by the noobs. Definately need rear engine mounts too
MR2YEN - CAI, engine mounts, plugs, polish headlights
elusi0n - Headlights
Sublime - Dials
xSlurpee - Install HIDS, Install angel eyes, Polish headlights, Install UAS CAI (if available)
gpat - Plugs, service, brake pads
bushido - CAI
poahfto - Angel eyes, Pant brake calipers , Tint my taillights and backpanel, install CAI, sex up headlights
Topao - Shocks, Engine Mounts??? This ones prob a stretch but how about Front Sway Bar??
Rock_it - Replace brake master ... Pads if not done this weekend too

Dont think we can get that done man ... ill help teach you take off the calipers but painting them the non dodgy way will require you to sand and clean the calipers then paint afew coats and leave it to dry for like 30hours before putting them back onto your car.

poahfto · Post by **poahfto** » Mon Sep 29, 2008 11:54 am

ohh well lol.

i'll probly have it done by the DIY day anyway lol

Post by **kazbah** » Mon Sep 29, 2008 2:53 pm

Hey guys, I've removed the gibberish from this thread it was getting a bit bulky at 10 pages!!!

There is a new thread called DIY Day Gibberish which contains all the...... well..... gibberish from here. Can we keep this thread on topic so we have a fair idea of what is going to be done on the day...

Cheers

Post by **aza013** » Mon Sep 29, 2008 3:42 pm

xSlurpee wrote:
poahfto wrote:JoeJoe - shocks & springs
Kazbah - shocks (possibly) full car detail by the noobs. Definately need rear engine mounts too
MR2YEN - CAI, engine mounts, plugs, polish headlights
elusi0n - Headlights
Sublime - Dials
xSlurpee - Install HIDS, Install angel eyes, Polish headlights, Install UAS CAI (if available)
gpat - Plugs, service, brake pads
bushido - CAI
poahfto - Angel eyes, Pant brake calipers , Tint my taillights and backpanel, install CAI, sex up headlights
Topao - Shocks, Engine Mounts??? This ones prob a stretch but how about Front Sway Bar??
Rock_it - Replace brake master ... Pads if not done this weekend too
Dont think we can get that done man ... ill help teach you take off the calipers but painting them the non dodgy way will require you to sand and clean the calipers then paint afew coats and leave it to dry for like 30hours before putting them back onto your car.

the calipers can be done on the car and will only take an hour or so I did my ones on the car and they are still good

Post by **aza013** » Mon Sep 29, 2008 3:47 pm

nicholas wrote:Aza, what's the cost bud? How many beers required per headlight?

I dont drink beer

I drink woodstock bourbon or shivas regal

and as for how many I will leave that up to you

xSlurpee · Post by **xSlurpee** » Mon Sep 29, 2008 3:48 pm

oh wow, but wont you need to give it time to dry aza?
hehe dont drink beer? ... *point noted*

Will bring some JW black label and woodstock bourbon to bribe Aaron

also thanks kazbah for tidying up the thread

Post by **aza013** » Mon Sep 29, 2008 4:04 pm

xSlurpee wrote:oh wow, but wont you need to give it time to dry aza?

by the time you get to the 4th one you can start putting the rimes back on as the calipers dont hit on anything and will be tuch dry. Also if you use the calipper paint the best thing for it is to get them hot and bake the paint on, the fastest way to do that is take it for a drive

nicholas · Post by **nicholas** » Mon Sep 29, 2008 5:14 pm

Steve / anyone else doing CAI...

Can you please give me a shopping list of things to get so that I can do this on the day too?

sublime19 · Post by **sublime19** » Wed Oct 01, 2008 1:57 pm

JoeJoe - shocks & springs
Kazbah - shocks (possibly) full car detail by the noobs. Definately need rear engine mounts too
MR2YEN - CAI, engine mounts, plugs, polish headlights
elusi0n - Headlights
xSlurpee - Install HIDS, Install angel eyes, Polish headlights, Install UAS CAI (if available)
gpat - Plugs, service, brake pads
bushido - CAI
poahfto - Angel eyes, Pant brake calipers , Tint my taillights and backpanel, install CAI, sex up headlights
Topao - Shocks, Engine Mounts??? This ones prob a stretch but how about Front Sway Bar??
Rock_it - Replace brake master ... Pads if not done this weekend too

Updated - Taking my name off this, Harbour life on 22nd of november

sublime19 · Post by **sublime19** » Wed Oct 01, 2008 1:59 pm

Unless you guys are starting early, last time it started @ 9am if iirc? Then I'll rock up!

FTO AUSTRALIA

DIY Day sat the 22nd November start time 9am

What date is good for you?