DIY Day sat the 22nd November start time 9am

Post by **aza013** » Mon Sep 01, 2008 12:00 pm

kazbah wrote:Now that the most important things have been taken care of, we just need to set a date!

first thing Hi Kaz and THANK YOU

ok and now for some dates :-
sat the 18th October
sat the 1st November
sat the 8th November
sat the 22nd Novenber

this will give us all time to get things set up and also time to get all the things we need for the day. So let us know what day is best and we can go from there.
All ppl that want to get things done MUST be at location by 09:00 on the day.

next thing start putting up your lists of what you want done and we can tell you if it can be done or not.

jonowong · Post by **jonowong** » Mon Sep 01, 2008 12:38 pm

november is during uni exams... and i dont know when i finish...

but the greatest chance of me coming would be on the 22nd of nov

bushido · Post by **bushido** » Mon Sep 01, 2008 12:41 pm

remove front bar

and fit cai ram pipe.

Post by **Bennoz** » Mon Sep 01, 2008 2:37 pm

Installation of 6A13, wire in Haltech Interceptor, downsize nitrous shot, dyno tune

jonowong · Post by **jonowong** » Mon Sep 01, 2008 3:05 pm

Bennoz wrote:Installation of 6A13, wire in Haltech Interceptor, downsize nitrous shot, dyno tune

i can tune it on the road if your willing to take it up to 7000 rpm in 3rd or 4th around kaz's hood!

Post by **aza013** » Mon Sep 01, 2008 3:16 pm

Bennoz wrote:Installation of 6A13, wire in Haltech Interceptor, downsize nitrous shot, dyno tune

well if thats the way its going to be then I want to install the 6A13 bottom end fit the 6A12 topend and unichip

I think the 2 jobs there will see the day out

sublime19 · Post by **sublime19** » Mon Sep 01, 2008 7:26 pm

I'll come along for another DIY day just to talk to people, dont think there's anything I really wanna do, but I'll bring another case of beer anyway.

sublime19 · Post by **sublime19** » Mon Sep 01, 2008 7:30 pm

Actually.. Ben can you help me put my dials in? I'll bribe you with two cases of beer for your troubles! (yes, BOAG premium!)

JOeJOe · Post by **JOeJOe** » Tue Sep 02, 2008 11:29 am

Shocks and Springs

Post by **Bennoz** » Tue Sep 02, 2008 11:34 am

JOeJOe wrote:Shocks and Springs

Wahey!! There's the first big one of the day thats got my name written all over it...

Be prepared to go straight from Kaz's place to a wheel alignment joint...

Remind me to bring my spring compressors.

Post by **kazbah** » Tue Sep 02, 2008 12:01 pm

Which reminds me, we will have to check my shocks before the day to see if they are seized

Post by **Bennoz** » Tue Sep 02, 2008 12:03 pm

God help me... 2 full sets of shocks in a day. I might have to bring the air compressor & pneumatic wrenches if thats the case.

Post by **kazbah** » Tue Sep 02, 2008 12:06 pm

Mine might be ok, just a stiff ride

jonowong · Post by **jonowong** » Tue Sep 02, 2008 12:27 pm

ill be busy tuning bens car

Post by **aza013** » Tue Sep 02, 2008 12:47 pm

Bennoz wrote:God help me... 2 full sets of shocks in a day. I might have to bring the air compressor & pneumatic wrenches if thats the case.

its all good Ben I can help out with them

elusi0n · Post by **elusi0n** » Tue Sep 02, 2008 12:54 pm

i've got a set of headlights to be delaminated

(looks at Aza)

MR2YEN · Post by **MR2YEN** » Tue Sep 02, 2008 1:37 pm

Got my arc intake pipe to fit a lot with new pod filter. I wanna do the CAI intake too, do i just get the monza pipe from supercheap for that? Do i need anything else?

Also wondering if i could get my engine mounts replaced that day?? (Ben.. cases of beer involved lol.)

Post by **Bennoz** » Tue Sep 02, 2008 1:44 pm

Yeah pipe from supercheap, grab some big hose clamps too. I'll bring some 75mm pvc pipe & a hack saw to make joiners.

See if you can also grab some thin strips of metal too make a mounting bracket out of.

Post by **aza013** » Tue Sep 02, 2008 1:52 pm

Bennoz wrote:Yeah pipe from supercheap, grab some big hose clamps too. I'll bring some 75mm pvc pipe & a hack saw to make joiners.

See if you can also grab some thin strips of metal too make a mounting bracket out of.

I already have some of the metal strip so I will bring that along with me and some pvc pipe as well.

elusi0n yep I can do that too

Post by **Bennoz** » Tue Sep 02, 2008 2:04 pm

Sweet

So we should start a list:

JoeJoe - shocks & springs
Kazbah - shocks (possibly)
MR2YEN - CAI
elusi0n - Headlights
Sublime - Dials

FTO AUSTRALIA

DIY Day sat the 22nd November start time 9am

What date is good for you?