ATTN: DSTOCKS... Parts required

ft04me · Post by **ft04me** » Mon Aug 18, 2008 7:29 pm

Hey guys.. after going to pedders to get my fto checked out.. they told me i needed Right hand Strut, Lower Arm R/H and R/H Stub Axle

can someone tell me what these parts are..mayb some1 post up pics? so then i know what they look like and how much work is required to replace these? Specially the Stub axle as i've never heard of it!

Hey Dwayne those are the parts i need!.. do u think u can source it out for me?

Post by **I8A4RE** » Mon Aug 18, 2008 8:01 pm

Mate why did you got to pedders? they suck balls. They have no idea what they are talking about.

Post by **dstocks** » Mon Aug 18, 2008 10:03 pm

OK,

The strut is basically the shock absorber with the large spring in it. Do you know if you have stock shocks or aftermarket. If you have stock shocks, I have one that can be used to replace the one you have.

The stub axle is the bit the wheel bolts to. Also known as the hub.

The Lower arm is the lower suspension arm (triangular bit that attaches to the bottom of the hub. As to how long to replace, you are probably looking at about 30 minutes if you know what you are doing and have the right tools. Can be a bitch to get the hub off as the crown nut is usually bloody tight.

I have all the bits they have told you you need.

xSlurpee · Post by **xSlurpee** » Tue Aug 19, 2008 1:04 am

wow sure, know your stuff Dwayne ... happen to have passenger side front inner arch? just realised mines missing

ft04me · Post by **ft04me** » Tue Aug 19, 2008 3:51 pm

dstocks wrote:OK,

The strut is basically the shock absorber with the large spring in it. Do you know if you have stock shocks or aftermarket. If you have stock shocks, I have one that can be used to replace the one you have.

The stub axle is the bit the wheel bolts to. Also known as the hub.

The Lower arm is the lower suspension arm (triangular bit that attaches to the bottom of the hub. As to how long to replace, you are probably looking at about 30 minutes if you know what you are doing and have the right tools. Can be a bitch to get the hub off as the crown nut is usually bloody tight.

I have all the bits they have told you you need.

yeah my fto is stock as a rock.. only mods are the "custom body" thanks to the guy who crashed into me..lolz so yeah the strut is stock!

how long do u think it'lltake til u get these parts? or they they already off and ready to send? are you coming back here again to pick up your furniture?

Post by **dstocks** » Wed Aug 20, 2008 10:23 am

Auction hasnt ended yet, so dont know. As to how long to get off, about an hour maybe less. Hopefully will try and get it all done on the weekend

ft04me · Post by **ft04me** » Thu Aug 21, 2008 4:18 pm

ok thanks dwayne again... and let me know how u're gonna send it..

i've been stuck this week woth uni and work coz of my car ARGH!!!

i need to get it moving again ASAP~!

ft04me · Post by **ft04me** » Sun Aug 24, 2008 5:31 pm

hey dwayne just checking if u were able to get the part this weekend?

if so what would be the best way for me to get it so i can fix the FTO...

Post by **dstocks** » Sun Aug 24, 2008 11:40 pm

tomorrow......

xSlurpee · Post by **xSlurpee** » Mon Aug 25, 2008 12:00 am

xSlurpee wrote:wow sure, know your stuff Dwayne ... happen to have passenger side front inner arch? just realised mines missing

Sorry im too lazy to pm or make a thread about it