Adjustable Camber arms...
Moderators: IMC, Club Staff
- FtoSam
- Oldtimer
- Posts: 3924
- jedwabna poszewka promocja
- Joined: Wed Jul 13, 2005 5:00 pm
- Location: Brisbane West
- Contact:
Adjustable Camber arms...
Need some urgently for the rear of the FTO...
Anybody got any suggestions?? Whiteline perhaps???
If so are they the same as any model of lancer??
any help would be great as im getting around 4 degrees of camber and shredding tyres very quickly..
Anybody got any suggestions?? Whiteline perhaps???
If so are they the same as any model of lancer??
any help would be great as im getting around 4 degrees of camber and shredding tyres very quickly..

If you need good deal on photography, let me know.
- Bennoz
- National President
- Posts: 23676
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
- DaveO
- Grease Monkey
- Posts: 184
- Joined: Wed Dec 06, 2006 6:00 pm
- Location: Geelong
- Contact:
- FtoSam
- Oldtimer
- Posts: 3924
- Joined: Wed Jul 13, 2005 5:00 pm
- Location: Brisbane West
- Contact:
- Bennoz
- National President
- Posts: 23676
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
This is very true, but I dunno if you'd get 4 degree's adjustment out of it..
And you dont have to have coilovers to have the strut tops. I was running the Tein tops on KYB gas shocks & Apex springs previously.
Here's some good ones from Kmac if you cant get it dialed out with the lower bolt:
http://www.k-mac.com.au/
The lower bolt mentioned:

And you dont have to have coilovers to have the strut tops. I was running the Tein tops on KYB gas shocks & Apex springs previously.
Here's some good ones from Kmac if you cant get it dialed out with the lower bolt:
http://www.k-mac.com.au/
The lower bolt mentioned:

- FtoSam
- Oldtimer
- Posts: 3924
- Joined: Wed Jul 13, 2005 5:00 pm
- Location: Brisbane West
- Contact:
need rears...
I need to go coilover anyway, so might as well just do that...
While im at it, im looking at doing some more suspension upgrades (After I had a Civic up my arse for a whole mountain run!!)...
So im looking at:
- Front and rear coilovers with pillowtops.
- Front Control Arm Bushes - SPF1100K & SPF1500K
- Front and Rear Sway Bars BMF44Z & BMR74
- Front Droplinks (Yet to find Part number)
- Lsd
Could you check those part numbers will fit a GPX Ben?
Also is there any other parts you would recommend i upgrade at the same time?
Thanks
I need to go coilover anyway, so might as well just do that...
While im at it, im looking at doing some more suspension upgrades (After I had a Civic up my arse for a whole mountain run!!)...
So im looking at:
- Front and rear coilovers with pillowtops.
- Front Control Arm Bushes - SPF1100K & SPF1500K
- Front and Rear Sway Bars BMF44Z & BMR74
- Front Droplinks (Yet to find Part number)
- Lsd
Could you check those part numbers will fit a GPX Ben?
Also is there any other parts you would recommend i upgrade at the same time?
Thanks

If you need good deal on photography, let me know.
- FtoSam
- Oldtimer
- Posts: 3924
- Joined: Wed Jul 13, 2005 5:00 pm
- Location: Brisbane West
- Contact:
- yano
- Mechanic
- Posts: 721
- Joined: Sun Dec 16, 2007 6:00 pm
Pretty sure that topic's been covered before on here. I've been looking into both and as far as performance they're basically the same. Same build quality as well i.e. product of england, assembled in taiwan. Only other difference is the warranty, (d2 a yr, g4 2years). G4's go for $1400 from justjap and yeh the ebay seller in nz is the cheapest I've seen for d2's. A friend use to have a set of d2's on a turboed civic and he rated them pretty highly. Hope that helps
- vipfto
- Forum Moderator
- Posts: 4154
- Joined: Mon Oct 29, 2007 5:00 pm
- Location: Adelaide
With the eccentric cams stock you should be able to get from 0 to 4 deg neg camber sam
checked up on mine using alignment machine at work other day had it just over 4 deg from memory and of course back to zero however you can always modify washers for more flexibility
no point spending big money unless you have too

no point spending big money unless you have too
FTO GR-TURBO
172KW ATW @ 11PSI
172KW ATW @ 11PSI
- Bennoz
- National President
- Posts: 23676
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Ok, for bushes you need:FtoSam wrote:need rears...
I need to go coilover anyway, so might as well just do that...
While im at it, im looking at doing some more suspension upgrades (After I had a Civic up my arse for a whole mountain run!!)...
So im looking at:
- Front and rear coilovers with pillowtops.
- Front Control Arm Bushes - SPF1100K & SPF1500K
- Front and Rear Sway Bars BMF44Z & BMR74
- Front Droplinks (Yet to find Part number)
- Lsd
Could you check those part numbers will fit a GPX Ben?
Also is there any other parts you would recommend i upgrade at the same time?
Thanks
- Front control arm, front bushes (SPF1160)

- Front control arm rear bushes (anti-lift kit) (SPF1502AK)

For swaybars, BMF44Z is correct for the front & BMR64Z for the rear. Its a bigger 22mm one & you may want to get the heavy duty adjustable link kit to go with it - KLC047 (saves you from buying rear droplinks.)
- I8A4RE
- QLD Coordinator
- Posts: 9594
- Joined: Mon Aug 28, 2006 5:00 pm
- Location: BOOSTIN in front of you
- Contact:
You know my opinion on the G4's. And yes the g4's come with pillow tops.
CHRISTIANITY: The belief that a cosmic Jewish Zombie who was his own father can make you live forever if you symbolically eat his flesh and telepathically tell him you accept him as your master, so he can remove an evil force from your soul that is present in humanity because a rib-woman was convinced by a talking snake to eat from a magical tree...