LIMITED RUN: REVERSE INDIGLO DIALS

TheSentry · Post by **TheSentry** » Mon Feb 23, 2004 8:30 am

How hard would it be to put these babies in and what would it involved? Do the needles have to be re-calibrated etc...?

kmc · Post by **kmc** » Mon Feb 23, 2004 5:33 pm

Fitting wil take approx 1-2 hours taking things very slow, or competent installer half to one hour. The dials will just slip over the needle, so no need to remove same or requirement to re callibrate.. The dials will require to be connected to a power supply ie to ashtray light or wire which supplies power to the lights on clock,dash etc.

kmc · Post by **kmc** » Fri Feb 27, 2004 7:18 am

Due to a problem with my email, orders can still be made for the indi dials till atleast end of next week which is about the 8th March. PLease contact smorrison.

kmc

LOO00X · Post by **LOO00X** » Fri Feb 27, 2004 10:38 am

phew.... I was scared I missed out.

Can I order one with the MANUAL dials?

$175 right?

Stephen, I can pay u anytime

dannyboyau · Post by **dannyboyau** » Fri Mar 12, 2004 9:19 pm

smorison KMC is trying to contact you

kmc · Post by **kmc** » Sat Mar 13, 2004 7:39 am

was i, when, where

did i miss something, or did when i was drunk

dannyboyau · Post by **dannyboyau** » Sat Mar 13, 2004 5:46 pm

This is email i recieved

Hi, I am from KMC products. I have been unable to get in contact with
s
Morrison. Can I get your messenger address so I can ask you to post a
message on the fto aus forum for me re reverse indi dials.

Thanks

kmc

kmc · Post by **kmc** » Sat Mar 13, 2004 7:59 pm

ahhh, thanks. Yep that was a while back, is that you just receiving it?

Thanks for your assistance.

kmc

dannyboyau · Post by **dannyboyau** » Sun Mar 14, 2004 12:24 am

i dont check my yahoo email very often

LOO00X · Post by **LOO00X** » Thu Mar 18, 2004 8:01 pm

When are the dials arriving anyway? do we have an ETA?

kmc · Post by **kmc** » Thu Mar 18, 2004 9:53 pm

spoke to my supplier, should be getting samples sent this week for confirmation and their after 10 days for production.

kmc

LOO00X · Post by **LOO00X** » Mon Mar 22, 2004 1:30 am

hmmmm..... so they haven't built them yet? 10 days till production you say?

Oh man... I can't wait that long... my dash lights have gone out on the right half where the speedometer is. So at night, there is no backlight coming out from the dash on the right hand side and so I have no idea how fast I am going but I can still see my tacho. ARGH!

I hope it arrives soon coz I want to change my dash lights ASAP. Thanks!

G1 · Post by G1 » Mon Mar 22, 2004 12:45 pm

hey brendan wasnt yours like that for a while??

Post by **smorison** » Wed Mar 24, 2004 12:05 am

LOO00X wrote:
I hope it arrives soon coz I want to change my dash lights ASAP. Thanks!

ummm its really easy to replace the globes brendan come on sunday and i'll show you how!

ruchi · Post by **ruchi** » Wed Mar 24, 2004 12:09 am

easy to replace them, a bugger to find them (T6.5s)

Post by **smorison** » Wed Mar 24, 2004 12:11 am

ruchi wrote:easy to replace them, a bugger to find them (T6.5s)

haven't actually had to find them....

but repco or somewhere like that should be able to order them in.... do you have the part number (or was that it?)

mine are being replaced with LED's so i may just have some for you brendan if i get time out of my 16 hours of working a day to actually have some fun

ruchi · Post by **ruchi** » Wed Mar 24, 2004 12:24 am

Narva have them but don't list them in their catalogue as they only got them in as a spare part not a normal stock item. So if you ask at Repco etc. and they look up the Narva book, they won't find them.

I know that most Autobarns received a Narva sample kit, which includes a selection of odd globes, including the T6.5. The sample kit looks a little like a plastic fishing tackle box, but with globes in it instead of fishing hooks.

Have you done your LEDs or are you about to do them? I can "shed a little light" on that subject too

Post by **smorison** » Wed Mar 24, 2004 12:28 am

ruchi wrote:
Have you done your LEDs or are you about to do them? I can "shed a little light" on that subject too

about to do them.

going to autobarn tomorrow to order a bunch of the plastic thingi ma jigs that the globes fit into (so i have spares)...

ruchi · Post by **ruchi** » Wed Mar 24, 2004 12:46 am

OK, here's the first bit of light... you won't find T6.5 holders in Australia (unless imported from O/S).

Narva etc. only have T5 and T10. The T5 sits a little loose and over time with road vibration could possibly pop out (I said possibly), they also sit at an angle coz they are a little too small for the T6.5 hole. The T10 are just too big.

As for more information, I've been where you're heading, and perhaps this is where what you mentioned in your PM could come into play

(keeps everyone else in the dark

)

Adriano · Post by **Adriano** » Wed Mar 24, 2004 10:17 am

ruchi werent you preparing a package that will list all the items we would need for a dash LED replacement from ultraleds?? was achly counting on that one coz im not happy with my own DIY replacement...