Floorpan

FtoSam · Post by **FtoSam** » Mon Jul 07, 2008 8:18 am

What models does the FTO share its floorpan with?

To put in the rear drivetrain what needs to be taken out? i.e. is it neccesary to weld in an EVO rear section?

Already taking the fuel tank out (Going fuel cell) so thats out of the way...

Any help would be great...

Post by **Bennoz** » Tue Jul 08, 2008 12:19 pm

According to CAPS, the floor pans (there are 2, a front & rear) are FTO Specific only.

EVO pans:

FtoSam · Post by **FtoSam** » Tue Jul 08, 2008 12:26 pm

just put a deposit on an evo 4.... whole car except panels and engine

Post by **Bennoz** » Tue Jul 08, 2008 12:36 pm

Whats the chassis code on that? Like CN9A or CP9A etc? (Like DE3A... is to the FTO.)

FtoSam · Post by **FtoSam** » Tue Jul 08, 2008 12:56 pm

CN9A but i'd have to check...

Post by **I8A4RE** » Tue Jul 08, 2008 7:50 pm

Ben is the top CAPS pic FTO? Cause it looks like a lot of those numbers match up or am i just reading it wrong?

FtoSam · Post by **FtoSam** » Tue Jul 08, 2008 11:36 pm

One concern i am having is this brace here...

Ben could you check what happens here on the evo?

RichardB · Post by **RichardB** » Wed Jul 09, 2008 1:34 am

thats my next project as well

Post by **Bennoz** » Wed Jul 09, 2008 8:43 am

I8A4RE wrote:Ben is the top CAPS pic FTO? Cause it looks like a lot of those numbers match up or am i just reading it wrong?

Take no notice of those number mate. Thet are just reference numbers that CAPS uses. When you double click on one of them it returns you to the main CAPS screen with the Mitsubish part number (MD123456 etc)

Post by **Bennoz** » Wed Jul 09, 2008 8:47 am

FtoSam wrote:One concern i am having is this brace here...

Ben could you check what happens here on the evo?

Which bit? The lower one is the subframe, the upper part with the corregated rubber on it is the steering rack...

FtoSam · Post by **FtoSam** » Wed Jul 09, 2008 10:36 am

Subframe.... it almost looks to be blocking the tunnel... is this the same in the evo?

RichardB · Post by **RichardB** » Wed Jul 09, 2008 5:01 pm

dont know if this help

FTO
Wheelbase 2,500mm
Front Track 1,490mm
Rear Track 1,485mm

EVO I
Wheelbase 2,500mm
Front Track 1,450mm
Rear Track 1,460mm

EVO II
Wheelbase 2,510mm
Front Track 1,465mm
Rear Track 1,470mm

EVO III
Wheelbase 2,510mm
Front Track 1,465mm
Rear Track 1,470mm

EVO IV
Wheelbase 2,510mm
Front Track 1,470mm
Rear Track 1,470mm

EVO V
Wheelbase 2,510mm
Front Track 1,510mm
Rear Track 1,505mm

EVO VI
Wheelbase 2,510mm
Front Track 1,510mm
Rear Track 1,505mm

GTO
Wheelbase 2470mm
Front Track 1560mm
Rear Track 1580mm