Just saw these on Ftooc, never seen them before !

Post by **I8A4RE** » Mon Jun 02, 2008 1:25 pm

How close do these eclipse ones look, about half page down

http://www.360tuners.com/index.asp?Page ... tegory=404

Post by **dstocks** » Mon Jun 02, 2008 2:09 pm

Heres the ebay search....

http://search.ebay.com/search/search.dl ... category0=

Post by **I8A4RE** » Mon Jun 02, 2008 2:23 pm

opps forgot add link, its there now.

Heres the ebay search....

Yeah definitly be able to do something with those

SILVERFISH · Post by **SILVERFISH** » Mon Jun 02, 2008 3:55 pm

yeah, this is something i've been looking at for a while,
been considering getting a set of Eclipse LED's
and either modifying them to fit the FTO taillight housing,
or modifying the rear of the FTO to fit them -

hey dstocks, do you think it'll be possible for your contacts
to manufacture these for the FTO from scratch?
was thinking that the smaller circle of LED's could be
indicator yellow on the outside & reverse light white on the inside.

as far as legality?
just sell them on the basis of "for showcar purposes only - non ADR approved"
to my knowledge ADR approval costs a freakin fortune.

mr-charisma · Post by **mr-charisma** » Tue Jun 03, 2008 11:13 pm

Closest thing you'd find would likely be Corvette lights .. I think I came across some that were for a 'C4'
But you will pay through the nose for them.. quite the expensive..

I'll try & track down some other ones I found back when I was looking for some.

jonowong · Post by **jonowong** » Wed Jun 04, 2008 12:18 am

i remember dstocks saying that minimum order would be 500 or 1000 at $500 each

Post by **dstocks** » Wed Jun 04, 2008 8:44 am

Doesnt hurt to ask. Mark is travelling to Japan and Tiawan in the next month and will be speaking to light manufacturers in Tiawan anyway. Any info I can get to take with him will help

manofwood · Post by **manofwood** » Wed Jun 04, 2008 8:16 pm

anyone want to sell me a set of taillights, i'll do the LED thingo. I like doing those fiddly little modifications. It wouldnt be that that hard to just get all the super-brights from dick smiths and creating a mini housing sealing the LED's in clear epoxy, and fitting that into the main housing.
It would just be time consuming. it wouldnt be as tidy as the kaze's but the imagination is the llimit

Post by **dstocks** » Wed Jun 04, 2008 8:41 pm

Well, ill have a set from Japan in a few weeks.......

manofwood · Post by **manofwood** » Thu Jun 05, 2008 11:43 am

emmuchizzit?

rock_it · Post by **rock_it** » Thu Jun 05, 2008 1:17 pm

manofwood wrote:emmuchizzit?

manofwood · Post by **manofwood** » Thu Jun 05, 2008 2:08 pm

how much is it

rock_it · Post by **rock_it** » Thu Jun 05, 2008 3:43 pm

manofwood wrote:how much is it

I can see that now .... Hehehehehehehe ...