Adjusting Tappets(I think thats how its spelt)

General Questions and comments

Moderators: IMC, Club Staff

Post Reply
User avatar
TA
Grease Monkey
Posts: 180
jedwabna poszewka promocja
Joined: Fri Dec 28, 2007 6:00 pm
Location: Sydney, NSW

Adjusting Tappets(I think thats how its spelt)

Post by TA »

Hey guys, as some are aware, my tappets have been a little noisy lately due to a previous mechanic who had little to none experience in FTOs.

Ive now gone to two mechanics, Pulse Racing and IS Motor Racing, one quoted $450 for the job of adjusting tappets and the other $200.

Any opinion guys?! That a good price?!

cheers =]
User avatar
aza013
NSW Coordinator
Posts: 9089
Joined: Mon Mar 26, 2007 5:00 pm
Location: The Shire
Contact:

Post by aza013 »

I would go with Pulse as they did my ones and they are spot on now :D
it did sound like a deasel engin befor they fixed them :lol:
User avatar
RalliartBoy
Mechanic
Posts: 486
Joined: Tue Aug 14, 2007 5:00 pm
Location: Sydney

Post by RalliartBoy »

was Pulse the one who quoted you $450 ?

I have been to a few mechanics who either told me they couldn't be done, they can't be adjusted all the way through to a mechanic who said i needed an engine rebuild.

They aren't that bad and the Motul oil has helped but i still wouldn't mind getting them done.
User avatar
TA
Grease Monkey
Posts: 180
Joined: Fri Dec 28, 2007 6:00 pm
Location: Sydney, NSW

Post by TA »

yes pulse quoted $450, im going IS motor racing, thats also known as 'Ricol' on another forum thread, it goes in tomorrow night.

ill tell you guys how it goes, fingers crossd!
User avatar
RalliartBoy
Mechanic
Posts: 486
Joined: Tue Aug 14, 2007 5:00 pm
Location: Sydney

Post by RalliartBoy »

Please do, will be very interested as to how it turns out given the big price difference between the two workshops.

Where are IS Racing located at ?
User avatar
TA
Grease Monkey
Posts: 180
Joined: Fri Dec 28, 2007 6:00 pm
Location: Sydney, NSW

Post by TA »

It is located in Rockdale, i first found out about the place off a thread in the NSW forum,

fto617 said "try IS Motor racing down at Rockdale
they know about FTOs inside out since the day they were heaps rare
but now days, Evos and GTRs are like camrys that appear so often there"

=]

so took the advice, rang around, chose them and will hope for the best! (=
User avatar
RalliartBoy
Mechanic
Posts: 486
Joined: Tue Aug 14, 2007 5:00 pm
Location: Sydney

Post by RalliartBoy »

Good luck with it.

Let me know how it goes.
Jono
Mechanic
Posts: 747
Joined: Thu Aug 22, 2002 5:00 pm
Location: Brisbane
Contact:

Post by Jono »

Hey Guys,

FYI

Just spoke with Maytech Automotive and they will do FTO Tappets
for $250, they are located at Moorebank.
Jono
User avatar
Richy
Mechanic
Posts: 517
Joined: Mon Dec 18, 2006 6:00 pm
Location: Sydney

Post by Richy »

Hey Jono

r u the one with maroon FTO which stayed at Maytech for a while for changing timing belt about 3 months ago..?? :P
Jono
Mechanic
Posts: 747
Joined: Thu Aug 22, 2002 5:00 pm
Location: Brisbane
Contact:

Post by Jono »

hmmm possibly?

Its red, not maroon, its NSW and QLD. totally different. :lol:
Jono
User avatar
Richy
Mechanic
Posts: 517
Joined: Mon Dec 18, 2006 6:00 pm
Location: Sydney

Post by Richy »

oops 8O ...may be i got it wrong...

just that Mayan mentioned something like a Jonathan owned that car, and may possibly be a forum member here....

:oops: :oops:
User avatar
MR2YEN
Grease Monkey
Posts: 253
Joined: Tue Feb 19, 2008 6:00 pm
Location: Sydney > West

Post by MR2YEN »

hey guys can i get the number and address for Maytech please?
User avatar
Bennoz
National President
Posts: 23676
Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:

Post by Bennoz »

akuma3
Oldtimer
Posts: 1217
Joined: Mon Feb 09, 2004 6:00 pm

Post by akuma3 »

I've asked IS Motoring before and they said it's a pain to do it, will only do it when the tappets is super noisy :D
The difference between what we do and what we are capable of doing would suffice to solve most of the world's problem.

[img]http://www.speedtest.net/result/79682123.png[/img]
Jono
Mechanic
Posts: 747
Joined: Thu Aug 22, 2002 5:00 pm
Location: Brisbane
Contact:

Post by Jono »

MR2YEN, Yeah thats prolly me.

Hey akuma, Mayans more than happy to do your tappets, hes got the special tool all made up so its a bit quicker for him.
Jono
User avatar
elusi0n
Grease Monkey
Posts: 168
Joined: Fri Mar 30, 2007 5:00 pm
Contact:

Post by elusi0n »

i just got mine done by Mayan at Maytech and the engine has gone heaps more quieter now, but not totally silent due to the wear that my engine had previous he couldnt adjust it to the right measurements but i guess maybe abit thicker oil should do it. But yeah Mayans a good guy, gets the job done, his a perfectionist by the way, lol
User avatar
Richy
Mechanic
Posts: 517
Joined: Mon Dec 18, 2006 6:00 pm
Location: Sydney

Post by Richy »

But yeah Mayans a good guy, gets the job done, his a perfectionist by the way, lol
yeah.. no doubt he is a perfectionist....thats why my cars been there for about 5 months now... :lol: :lol:
Post Reply