Need something, Put it in here.
Private Sales Only
Moderators: IMC, Club Staff
-
mr_f700
- Grease Monkey
- Posts: 239
- jedwabna poszewka promocja
- Joined: Tue Apr 17, 2007 5:00 pm
Post
by mr_f700 »
ive just bought a new aftermarjet steering wheel and need a boss kit
if anyone has 1 or knows of 1 please let me know
thanx
-
Bennoz
- National President
- Posts: 23678
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
-
Contact:
Post
by Bennoz »
Go to Auto One / Supercheap / Sparts & ask for them to order you in an Auto Technica one to suit your new wheel & a Lancer. Cost ya $60.
-
jonowong
- Oldtimer
- Posts: 3420
- Joined: Thu Jan 15, 2004 6:00 pm
- Location: Sydney
Post
by jonowong »
-
JOeJOe
- Oldtimer
- Posts: 1554
- Joined: Wed Mar 29, 2006 6:00 pm
Post
by JOeJOe »
Are they easy to install? The stock is a bit dull.
-
khunjeng
- Oldtimer
- Posts: 4455
- Joined: Mon Oct 24, 2005 5:00 pm
- Location: Melbourne, Victoria
Post
by khunjeng »
JOeJOe wrote:Are they easy to install? The stock is a bit dull.
not really. take u 1-2 hours of messing about but pretty easy. u need a 17mm socket and a screwdriver from memory
-
Bennoz
- National President
- Posts: 23678
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
-
Contact:
Post
by Bennoz »
And a vein in your forehead to pop

-
khunjeng
- Oldtimer
- Posts: 4455
- Joined: Mon Oct 24, 2005 5:00 pm
- Location: Melbourne, Victoria
Post
by khunjeng »
Bennoz wrote:And a vein in your forehead to pop

thats for sure...
a. that nut is pretty tight
b. getting it all aligned in the end can be a pain in the arse.
-
BorepYano
- Forum Moderator
- Posts: 4609
- Joined: Sat Aug 12, 2006 5:00 pm
- Location: Brisbane
Post
by BorepYano »
i would assume a steering wheel pulling offer thingo would come in handy, and might save u that vain
kiz wrote:silverGPX wrote:This requires a thread? lol
There's potential for a thread about anything on FTO Australia
-
Richy
- Mechanic
- Posts: 517
- Joined: Mon Dec 18, 2006 6:00 pm
- Location: Sydney
Post
by Richy »
Are they easy to install? The stock is a bit dull.
I think its not hard....if u do it right, should take half an hour. but yeah...after installing it...realigning the steering is a bitch...
anyway, below link to a guide of installing a new steering wheel
http://www.boostcruising.com/forums/ind ... opic=82296
hope this helps..
