Hehe, how many four letter words did he call me?MissxFTO wrote: LOL!!
he just read that when i did.. so funny the face was priceless!!
Autosalon. 29/30th Sept
Moderators: IMC, Club Staff
- mr-charisma
- Oldtimer
- Posts: 4020
- jedwabna poszewka promocja
- Joined: Wed Jul 06, 2005 5:00 pm
- Location: Brisbane, Australia
- mr-charisma
- Oldtimer
- Posts: 4020
- Joined: Wed Jul 06, 2005 5:00 pm
- Location: Brisbane, Australia
Hey, I used the onlne form when I signed on for Autosalon, but cause I was in such a rush to get it in I didn't notice that I didn't get to fill out a form that says what mods I've got & all that...
What do the points actually mean? Do we add up all our Club Points to see who wins a prize?
I won't have many points atm, might get 1 for the rims though, lol ... should I fill out a form & send it in?
What do the points actually mean? Do we add up all our Club Points to see who wins a prize?
I won't have many points atm, might get 1 for the rims though, lol ... should I fill out a form & send it in?
- MissxFTO
- Veteran Mechanic
- Posts: 886
- Joined: Sat Oct 28, 2006 5:00 pm
- Location: Brisbane
- Contact:
- Bamas
- Apprentice
- Posts: 42
- Joined: Tue Sep 04, 2007 5:00 pm
- Location: Brisbane
- Contact:
Yay my account finally active now. Okay now when I come around and the promo girls are making love to your cars while I shoot, come say hi to me ( I do bite FYI ). I have already dedicated a whole memory card for your cars, if you have a shot you would like don't be afraid to tell me else I'll roam free and molest your cars with my camera . 
- MissxFTO
- Veteran Mechanic
- Posts: 886
- Joined: Sat Oct 28, 2006 5:00 pm
- Location: Brisbane
- Contact:
- BorepYano
- Forum Moderator
- Posts: 4609
- Joined: Sat Aug 12, 2006 5:00 pm
- Location: Brisbane
- mr-charisma
- Oldtimer
- Posts: 4020
- Joined: Wed Jul 06, 2005 5:00 pm
- Location: Brisbane, Australia
- I8A4RE
- QLD Coordinator
- Posts: 9594
- Joined: Mon Aug 28, 2006 5:00 pm
- Location: BOOSTIN in front of you
- Contact:
BorepYano wrote:
I8AFRE wrote:
umm does anyone know of a good motel? somewhere close to where the show is and even closer to a pub
well... ben did mention that he has a king size bed in his hotel room lol
but if u dont want to shack up with him... how much u looking at spending? and for how many nights?
I'll let you rent it off me by the hour
CHRISTIANITY: The belief that a cosmic Jewish Zombie who was his own father can make you live forever if you symbolically eat his flesh and telepathically tell him you accept him as your master, so he can remove an evil force from your soul that is present in humanity because a rib-woman was convinced by a talking snake to eat from a magical tree...
- FtoSam
- Oldtimer
- Posts: 3924
- Joined: Wed Jul 13, 2005 5:00 pm
- Location: Brisbane West
- Contact:
CRAP!!! Just asked for some info on MAF/MAP sensors from my tuner... no problems there... but i asked him if he had built any FWD cars for AS...
Yep... just pumped out two lasers....
power.... 387hp atw... there goes my dreams of owning the FWD dyno comp...
but christ thats a quick laser
Yep... just pumped out two lasers....
power.... 387hp atw... there goes my dreams of owning the FWD dyno comp...
but christ thats a quick laser

If you need good deal on photography, let me know.
- MissxFTO
- Veteran Mechanic
- Posts: 886
- Joined: Sat Oct 28, 2006 5:00 pm
- Location: Brisbane
- Contact:
- FtoSam
- Oldtimer
- Posts: 3924
- Joined: Wed Jul 13, 2005 5:00 pm
- Location: Brisbane West
- Contact:
lol.. im getting the sucker tuned at max boost anyway... Will depend on how much boost the turbo can handle... hoping for over 20psi... engine could handle up to 26-28psi my tuner says but he wont know till we get it on the dyno...
never know... could pull 300kw!!....
unlikely...
hoping for 210kw... over the 200 mark would be sweet... over 230 is very unlikely...
never know... could pull 300kw!!....
unlikely...
hoping for 210kw... over the 200 mark would be sweet... over 230 is very unlikely...

If you need good deal on photography, let me know.
- FtoSam
- Oldtimer
- Posts: 3924
- Joined: Wed Jul 13, 2005 5:00 pm
- Location: Brisbane West
- Contact:
- MissxFTO
- Veteran Mechanic
- Posts: 886
- Joined: Sat Oct 28, 2006 5:00 pm
- Location: Brisbane
- Contact:
- FtoSam
- Oldtimer
- Posts: 3924
- Joined: Wed Jul 13, 2005 5:00 pm
- Location: Brisbane West
- Contact:
Lol.. sammi... $10k is not my bill for the conversion...
total is above $20k...
$10k is just the engine...
dont forget, turbo, intercooler, piping, exhaust, ECU, injectors, fuel lines, pump, LSD (yet to get this one), suspension to handle the power, custom built clutch ($1500), labour, tuning, BOV, Wastegate, boost controller, turbo timer, etc..
and $20k is using a pre-built turbo kit... add another $2k if you want to make one from scratch... which you'd have to...
IMO better to just go 6a13tt... wish i'd done that right at the start...
anyway, this is the AS thread... post in the Turbo Section under Sams Turbo Pt 2: Forging Engine to discuss more..
total is above $20k...
$10k is just the engine...
dont forget, turbo, intercooler, piping, exhaust, ECU, injectors, fuel lines, pump, LSD (yet to get this one), suspension to handle the power, custom built clutch ($1500), labour, tuning, BOV, Wastegate, boost controller, turbo timer, etc..
and $20k is using a pre-built turbo kit... add another $2k if you want to make one from scratch... which you'd have to...
IMO better to just go 6a13tt... wish i'd done that right at the start...
anyway, this is the AS thread... post in the Turbo Section under Sams Turbo Pt 2: Forging Engine to discuss more..

If you need good deal on photography, let me know.
- MissxFTO
- Veteran Mechanic
- Posts: 886
- Joined: Sat Oct 28, 2006 5:00 pm
- Location: Brisbane
- Contact:
- FtoSam
- Oldtimer
- Posts: 3924
- Joined: Wed Jul 13, 2005 5:00 pm
- Location: Brisbane West
- Contact:
lol... my engien arrives at JnR on monday... will hopefully be in and running by the next weekend (22nd)... will take the monday and tuesday off... need to do 1000km on the monday to run in the new engine at min psi...
then getting it serviced and give it a REAL dyno run ready for autosalon on the tuesday... **please please dont brake anything..**
its pretty technical how they run it in too... have to use a specific oil... have to have 4 ppl in the car and drive up long hills for 1000km... have to cut power to the fuel pump and crank it over on first start, etc etc...
then getting it serviced and give it a REAL dyno run ready for autosalon on the tuesday... **please please dont brake anything..**
its pretty technical how they run it in too... have to use a specific oil... have to have 4 ppl in the car and drive up long hills for 1000km... have to cut power to the fuel pump and crank it over on first start, etc etc...

If you need good deal on photography, let me know.
- MissxFTO
- Veteran Mechanic
- Posts: 886
- Joined: Sat Oct 28, 2006 5:00 pm
- Location: Brisbane
- Contact:
Ok,
today i am making up my reader board majigga..
if anyone wants me to make there sheet up let me know.. i have a sweet ass colour printer here @ work
just need to email me what you want on it..
eg.
Things ill need info on.
Engine & Exhaust:
Interior:
Wheels:
Exterior:
I.C.E:
Plus if you want any pics or specific colours let me know.
All you will need to do is get a cheap frame that fits A3 paper size
email: missfto@gmail.com
today i am making up my reader board majigga..
if anyone wants me to make there sheet up let me know.. i have a sweet ass colour printer here @ work
just need to email me what you want on it..
eg.

Things ill need info on.
Engine & Exhaust:
Interior:
Wheels:
Exterior:
I.C.E:
Plus if you want any pics or specific colours let me know.
All you will need to do is get a cheap frame that fits A3 paper size
email: missfto@gmail.com
[img]http://img291.imageshack.us/img291/923/msf70lz5.jpg[/img]