Where to buy

lwrida · Post by **lwrida** » Thu Aug 02, 2007 7:00 pm

I need a place in Sydney (preferably) where you can buy the cam and crank seals other than Northshore Mitsubishi.

Any one know of some places?

Post by **Bennoz** » Thu Aug 02, 2007 7:17 pm

Try Northshore Mitsubish... failing that try Northshore Mitsubishi

Sorry mate, they are gen & FTO specific parts. If you dont wanna sleep on your front cause of Mitsi's prices, you could try a Mitsi NZ or Kempys.

Grue · Post by **Grue** » Thu Aug 02, 2007 7:37 pm

I'll be on dry land Monday and have to go past my local mitsi place if you want me to get a quote from over here.

lwrida · Post by **lwrida** » Fri Aug 03, 2007 1:44 am

Thanks anyway Grue, my mechanic told me he's waiting to hear from Northshore Mits, looks like thats the only place here that will sell them.

BTW can't wait for Kempy's to send them out, I want this car on the road

Grue · Post by **Grue** » Fri Aug 03, 2007 2:04 am

Can't be much more left to fix can there mate?!

devil2004 · Post by **devil2004** » Fri Aug 03, 2007 3:46 pm

Tynan Kirrawee is where I get all my Mitsubishi parts

izonme · Post by **izonme** » Sun Aug 05, 2007 2:06 am

Don't buy parts hear in Australia get them from JAPAN..
Save MONEY........

Look at Yahoo Auctions Japan on the net for second hand and New parts from
MMC Japan.

This is the guy..... All my parts come from him so far.

khunjeng · Post by **khunjeng** » Sun Aug 05, 2007 11:59 am

izonme wrote:Don't buy parts hear in Australia get them from JAPAN..
Save MONEY........

Look at Yahoo Auctions Japan on the net for second hand and New parts from
MMC Japan.

This is the guy..... All my parts come from him so far.

He wants cam and crank seals. he's not going to buy them second hand (we hope) good guy though, used him before.

lwrida · Post by **lwrida** » Sun Aug 05, 2007 9:06 pm

Nar I might look stupid but I'm not that stupid to buy second hand cam and crank seals.

Anyway, sorted those parts out thanks for your help everyone, now I'm in need of a thermostat.

I'm looking on the site delicashop and seeing if they have it. But does anyone know of where I can get one of these from and the part number if you have it from the place.

Cheers

FtoSam · Post by **FtoSam** » Mon Aug 06, 2007 9:47 am

I remember doing mine sometime last year.

Ended up going with one that wasnt ment for an fto... was like 1 degree lower or something

lwrida · Post by **lwrida** » Tue Aug 14, 2007 9:07 pm

Do any of you super smart ppl know where you can buy a new air con condenser in Sydney?

Mine is apparently "beyond repair" Go figure..

rock_it · Post by **rock_it** » Tue Aug 14, 2007 9:14 pm

You could always order through a stealership ....

Not sure if a lancer or mirage one would be the same... Can you see a part number on your existing one ??? If so, just hunt for the same part number...

Failing that, you could try just jap ... But I asked them to do a search for me the other day for some parts, and they never got back to me ...

khunjeng · Post by **khunjeng** » Tue Aug 14, 2007 9:22 pm

1st wtf is with the formatting

I can send you a air condenser that can be repaired or u can pay $700 for a new one.

I bought a new one however its only got one holewhich can be welded up.

lwrida · Post by **lwrida** » Tue Aug 14, 2007 9:23 pm

I have gotten almost all my parts for my car from stealerships. Mainly the Northshore Mitsi one.

And thanks to this my repair bill is up to almost 2 grand without getting this condenser

lwrida · Post by **lwrida** » Tue Aug 14, 2007 9:24 pm

khunjeng wrote:1st wtf is with the formatting

I can send you a air condenser that can be repaired or u can pay $700 for a new one.

I bought a new one however its only got one holewhich can be welded up.

$700

F*** That !

How much for the one that can be repaired ?

khunjeng · Post by **khunjeng** » Tue Aug 14, 2007 9:29 pm

lwrida wrote:
khunjeng wrote:1st wtf is with the formatting

I can send you a air condenser that can be repaired or u can pay $700 for a new one.

I bought a new one however its only got one holewhich can be welded up.
$700

F*** That !

How much for the one that can be repaired ?

I will need to check the spot for repair. I would sell it for around $300 as they are quite expensive.

You can check buy calling the guys in Brisbane, forget their name they have them and its reco for about 500 and new for about 700 from memory

Some1 else might have one.

rock_it · Post by **rock_it** » Tue Aug 14, 2007 9:45 pm

lwrida wrote:I have gotten almost all my parts for my car from stealerships. Mainly the Northshore Mitsi one.

And thanks to this my repair bill is up to almost 2 grand without getting this condenser

I hear you on that one... I tried to get a brake master... $540 ... Thanks for coming ... So will end up trying to rebuild all the seals and stuff in my one.. Worth a try ... I should be able to get seals for it ... Well that is the hope...

lwrida · Post by **lwrida** » Tue Aug 14, 2007 9:50 pm

I'm just happy that my car is being fixed by my mechanics mechanic. Hes doing in his own time and hes a great guy and hes a perfectionist, if something is not right and not clean enough he will clean it. Cheering.

And with my losing my licence 2 weeks ago I don't mind him taking his time as I can't drive anyway.

I should have taken some pics of my engine when it was pulled apart.