Need some help on getting some parts

jakey106 · Post by **jakey106** » Tue Jun 05, 2007 12:31 pm

Hey guys I need some help. My local mitusbishi dealer are dick face devon heads and dont want to know me cause im driving an import and the local part suppliers arent much help either. So im wondering if any one can help me out.
I need is the front and read rocket cover caskets and also engine mounts due to a creking noise i am getting when i brake and accelerate.
So if any one can help me out i will appreciate it.

Post by **dstocks** » Tue Jun 05, 2007 2:01 pm

UAS used to do polyurethane engine mounts (which dont break like the standard mounts). Not sure if they still do or not!

jakey106 · Post by **jakey106** » Tue Jun 05, 2007 2:19 pm

they cost a fair bit dont they

Rocco · Post by **Rocco** » Tue Jun 05, 2007 2:30 pm

200 each i think,go to the unique auto sports website to find out for sure

jakey106 · Post by **jakey106** » Tue Jun 05, 2007 2:35 pm

lol yeah they are just check does any one want to do a group buy lol

FtoSam · Post by **FtoSam** » Tue Jun 05, 2007 2:43 pm

Check if RPW do... I want some and i'm spending a lot of money with them.. They should do a GB for em.. I know i want a full set and so does adam... Plus $7k worth of engine parts we should get a discount

Post by **dstocks** » Tue Jun 05, 2007 4:46 pm

Hey Sam, are you looking at getting a set of their extractors (im toying with the idea) and if so, is it worth considering doing a group thing on that too?

FtoSam · Post by **FtoSam** » Tue Jun 05, 2007 4:54 pm

Have been told by a few people that extractors arent overly neccesary with a turbo setup? I dont know why this is, but meh...

Im trying to go the angle of, Im spending damn close to $8k on my engine... can i get a 10% discount on anything else i want?

Will talk to them this arvo after work (thank you for time difference!)

Post by **dstocks** » Tue Jun 05, 2007 5:01 pm

Wellll.....

If you want to throw a set of extractors into the mix and see what $ value falls out the other side, that would be great

.

eThix · Post by **eThix** » Tue Jun 05, 2007 6:11 pm

i would like to get some extractors

, and apparently there a lot cheaper now from RPW, so i wounder how much of deal they could do us now

we could give Sam a cut of the savings if he gets us a good deal

what do you think Sam?

Post by **Supplanter** » Tue Jun 05, 2007 7:16 pm

I certainly need some engine mounts, mine have almost had it

jakey106 · Post by **jakey106** » Wed Jun 06, 2007 12:36 am

Well should we set up a group buy for both. By the way still need help with the rocket cover casket

Post by **Bennoz** » Wed Jun 06, 2007 12:39 am

Keep in mind most poly engine mount suppliers do them on an exchange basis....

jakey106 · Post by **jakey106** » Wed Jun 06, 2007 12:51 am

ahh sh*t they do to grr that means i will be without a car for a while until i get them back

Post by **dstocks** » Wed Jun 06, 2007 8:45 am

Ive got at least one full set of mounts lying around. Not keen to sell them to go straight into the car as I dont know what condition they are in.

topao · Post by **topao** » Wed Jun 06, 2007 10:48 am

I will buy mounts of its a group buy, im replacing everything else so might as well get these done too

onnzo · Post by **onnzo** » Thu Jun 07, 2007 12:16 am

Has anyone actully driven a car with poly engine mounts?

I replaced them in my gsr lancer with poly units and the vibration/harshness was unbearable!

I gt mine made for about $60 at a place in cheltenham - forget what it was called now. That was about 4 years ago though

Mike

Post by **Bennoz** » Thu Jun 07, 2007 12:26 am

^^ Indeed. I'd only be replacing the lower 2 in poly if any. Does give nice throttle response thou.

I had a set made (supplying my originals) by noltec. Was about $80 a bush from memory.

Post by **dstocks** » Thu Jun 07, 2007 8:40 am

Has anyone actully driven a car with poly engine mounts?

Yep, but only one (at back of engine). Didnt seem to make much of a difference from a vibration perspective.

They just did an exchange with my existing mount.

Jono · Post by **Jono** » Mon Jul 23, 2007 7:19 pm

Hi guys,

looks like my engine mounts both North and south are gone...

Does anyone know how much the OEM ones are?
- the UAS polys are 220 each exchange, which sounds like a rip off.

Bennoz, which noltec store/place did you goto to get your Engine mount made

thanks a heap

ps- im back in sydney for this week, so gotta get all my fto stuff done.

FTO AUSTRALIA

Need some help on getting some parts

Need some help on getting some parts

UAS

Sam

WElll

Mounts

yep