Hi there,
Just a question about fog light.
I bought my 95 FTO GR last week, but i noticed that the fog light
is working but the light is very week.
Then I took out the fog light to have a look,
I saw that just the small globes were working,
but the H3 globes didn't work.
Does anyone knows where's the problem.
THANKS
Fog Light
Moderators: IMC, Club Staff
-
llsf1225
- Apprentice
- Posts: 25
- jedwabna poszewka promocja
- Joined: Wed Dec 24, 2003 6:00 pm
- Location: Adelaide
- Contact:
-
TimmyD
- Mechanic
- Posts: 510
- Joined: Sat Oct 11, 2003 5:00 pm
- Location: Melbourne
- Contact:
-
llsf1225
- Apprentice
- Posts: 25
- Joined: Wed Dec 24, 2003 6:00 pm
- Location: Adelaide
- Contact:
-
FTO338
- Oldtimer
- Posts: 6712
- Joined: Sun Feb 09, 2003 6:00 pm
- Location: Port Melbourne: Pimping with RX400h, B200 Turbo.
hmmmm this happen 2 me before, but with my old car, it was the earth wiring. But 2 make sure, i think u better get an auto electrician to have a look!
DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
-
fto12345
- Mechanic
- Posts: 499
- Joined: Thu Aug 28, 2003 5:00 pm
- Location: Sydney
Hi,
Have you trid to take the dash cover out and see if the plug that plugs to the fog light button is in place?
It may be a simple case of the plug not being pluged in.
Have a look at that first.
And make sure take the bulb out and make sure that the bulbs are not blown.
You will have to look at it carefully as some times it is a very minor broken wire in the bulb and it still won't work.
If not then it's probably the wire problem...probably will need to trace the wire and see if it's broken or some thing any where...otherwise you will need an electricien to have a look at it.
Hope this helps.
Have you trid to take the dash cover out and see if the plug that plugs to the fog light button is in place?
It may be a simple case of the plug not being pluged in.
Have a look at that first.
And make sure take the bulb out and make sure that the bulbs are not blown.
You will have to look at it carefully as some times it is a very minor broken wire in the bulb and it still won't work.
If not then it's probably the wire problem...probably will need to trace the wire and see if it's broken or some thing any where...otherwise you will need an electricien to have a look at it.
Hope this helps.
-
payaya
- Oldtimer
- Posts: 3670
- Joined: Sat Sep 06, 2003 5:00 pm
take the switch out 100 bucks you will see its melted a bit.
The fog switch is a multi switch, so basically the side lights turn on still, but the function to the main H3 bulbs on the switch is stuffed.
Try pressing the switch hard over and over again, and sometimes you can get the main fogs to work.
Im on my third switch now, and it definately is the switch, get another one from kempys in new zealand, it cost me 60 bucks, remember to ask for the plug which goes into the switch as well, as most likely thats a bit melted as well.
And dont put any globes higher than 55Ws as that causes the switch to burn out.
The fog switch is a multi switch, so basically the side lights turn on still, but the function to the main H3 bulbs on the switch is stuffed.
Try pressing the switch hard over and over again, and sometimes you can get the main fogs to work.
Im on my third switch now, and it definately is the switch, get another one from kempys in new zealand, it cost me 60 bucks, remember to ask for the plug which goes into the switch as well, as most likely thats a bit melted as well.
And dont put any globes higher than 55Ws as that causes the switch to burn out.