Sam's Turbo Setup progress **FINISHED INSTALL** pics
Moderators: IMC, Club Staff
- nosman
- Grease Monkey
- Posts: 331
- jedwabna poszewka promocja
- Joined: Fri Oct 27, 2006 5:00 pm
- Location: Port Macquarie, NSW
- FtoSam
- Oldtimer
- Posts: 3924
- Joined: Wed Jul 13, 2005 5:00 pm
- Location: Brisbane West
- Contact:
- Fulltiltorgasm
- Grease Monkey
- Posts: 340
- Joined: Thu Sep 14, 2006 5:00 pm
- Location: Miami gold coast
- Contact:
- FtoSam
- Oldtimer
- Posts: 3924
- Joined: Wed Jul 13, 2005 5:00 pm
- Location: Brisbane West
- Contact:
- BorepYano
- Forum Moderator
- Posts: 4609
- Joined: Sat Aug 12, 2006 5:00 pm
- Location: Brisbane
ppl with power can edit other ppl's posts without it showing up?
Dammit, I hate you all.. I mean i love you all very much. please dont edit my post, dont you think it's bad enough that my name b0rep already says "borep" lol
btw sam, when i saw your post about WTB a GPX engine, my first though was "oh no, what happened", then promptly checked this thread expecting a post from you along the lines of "...i just blew up my engine..."
good to see that you haven't yet lol
Dammit, I hate you all.. I mean i love you all very much. please dont edit my post, dont you think it's bad enough that my name b0rep already says "borep" lol
btw sam, when i saw your post about WTB a GPX engine, my first though was "oh no, what happened", then promptly checked this thread expecting a post from you along the lines of "...i just blew up my engine..."
good to see that you haven't yet lol
kiz wrote:There's potential for a thread about anything on FTO AustraliasilverGPX wrote:This requires a thread? lol
- khunjeng
- Oldtimer
- Posts: 4455
- Joined: Mon Oct 24, 2005 5:00 pm
- Location: Melbourne, Victoria
- FtoSam
- Oldtimer
- Posts: 3924
- Joined: Wed Jul 13, 2005 5:00 pm
- Location: Brisbane West
- Contact:
- FtoSam
- Oldtimer
- Posts: 3924
- Joined: Wed Jul 13, 2005 5:00 pm
- Location: Brisbane West
- Contact:
- FtoSam
- Oldtimer
- Posts: 3924
- Joined: Wed Jul 13, 2005 5:00 pm
- Location: Brisbane West
- Contact:
- FtoSam
- Oldtimer
- Posts: 3924
- Joined: Wed Jul 13, 2005 5:00 pm
- Location: Brisbane West
- Contact:
Okay, Now in the 2nd attempt at getting this prick tuned.
1st time they had the wrong ECU or something. had to get sent back to microtec. took 9 days to get back. I took in last tuesday. It took 2 days for the tuner to realise that the ECU had the wrong Harness for the coil packs. So had the proper one overnighted up here.
Just called and they are wiring it up right now and hoping to have it running by this arvo... which they bloody better... got this cruise on sunday.
A few quick whinges to get out of my system. I know i should've expected them but i want to anyway.
Mechanic:
Way out with the original Quote. ended up being double. Said 2 days. took a month. Other than that a nice guy.
Tuner:
Asked to have microtec by 18th December. Didnt arrive till end of Jan.
Then the wrong one turned up. took almost 2 weeks for a new one to arrive. Then they say 2 days. one for install one for dyno. took 2 days to figure out they had the wrong wiring harness. and needed another 2 days to finish. and even then i dont know if it'll be finished.
Arghh bloody incompetent.. etc etc etc..
Okay im done...
Cant wait to get it back... hoping for this arvo. otherwise i'll be putting on my cranky pants.
Will update again tonight when i get home... If i dont post till late that means im cruisin round enjoying 7,500rpm boost.
1st time they had the wrong ECU or something. had to get sent back to microtec. took 9 days to get back. I took in last tuesday. It took 2 days for the tuner to realise that the ECU had the wrong Harness for the coil packs. So had the proper one overnighted up here.
Just called and they are wiring it up right now and hoping to have it running by this arvo... which they bloody better... got this cruise on sunday.
A few quick whinges to get out of my system. I know i should've expected them but i want to anyway.
Mechanic:
Way out with the original Quote. ended up being double. Said 2 days. took a month. Other than that a nice guy.
Tuner:
Asked to have microtec by 18th December. Didnt arrive till end of Jan.
Then the wrong one turned up. took almost 2 weeks for a new one to arrive. Then they say 2 days. one for install one for dyno. took 2 days to figure out they had the wrong wiring harness. and needed another 2 days to finish. and even then i dont know if it'll be finished.
Arghh bloody incompetent.. etc etc etc..
Okay im done...
Cant wait to get it back... hoping for this arvo. otherwise i'll be putting on my cranky pants.
Will update again tonight when i get home... If i dont post till late that means im cruisin round enjoying 7,500rpm boost.

If you need good deal on photography, let me know.
-
Cbrown1986
- Grease Monkey
- Posts: 121
- Joined: Wed Jul 06, 2005 5:00 pm
- FtoSam
- Oldtimer
- Posts: 3924
- Joined: Wed Jul 13, 2005 5:00 pm
- Location: Brisbane West
- Contact:
-
Cbrown1986
- Grease Monkey
- Posts: 121
- Joined: Wed Jul 06, 2005 5:00 pm
- FtoSam
- Oldtimer
- Posts: 3924
- Joined: Wed Jul 13, 2005 5:00 pm
- Location: Brisbane West
- Contact:
Well why the Hell isnt your name down for the cruise on sunday?
I'll even take you for a spin!
lol
Just heard back from the tuners again.
Everything is on, even the new injectors.
Car is fully wired up and running. (heard it in the backgroud)
Trying to get it tuned by this arvo. Worst case, they'll finish it tomorow.
Hoping for this arvo though. got much sh*t i'd like to do tomorrow.
I asked for a very "light" tune. one that has nice big buffers as far as fuel, detonation, etc. I asked for reliablitly primarily. So im not expecting over 215hp atw (160Kw). But at least it'll be reliable.
Getting another tune when fuel pump, exhaust, water injection, decompressed gaskets, etc go on.
Fuel system should be set then. with 390cc injectors, braided lines, FPR and a 4-500hp fuel pump. My step dad wants to make me a surge tank etc... i really dont think i need one though.
Cant wait to get it back and really open up on the way back home.
muahhahaha...
i can see me posting up later on something like... i have some good news and bad news...
good news:
my car does 180km/h so quickly....
bad news:
even the policemans laser said so.
I'll even take you for a spin!
Just heard back from the tuners again.
Everything is on, even the new injectors.
Car is fully wired up and running. (heard it in the backgroud)
Trying to get it tuned by this arvo. Worst case, they'll finish it tomorow.
Hoping for this arvo though. got much sh*t i'd like to do tomorrow.
I asked for a very "light" tune. one that has nice big buffers as far as fuel, detonation, etc. I asked for reliablitly primarily. So im not expecting over 215hp atw (160Kw). But at least it'll be reliable.
Getting another tune when fuel pump, exhaust, water injection, decompressed gaskets, etc go on.
Fuel system should be set then. with 390cc injectors, braided lines, FPR and a 4-500hp fuel pump. My step dad wants to make me a surge tank etc... i really dont think i need one though.
Cant wait to get it back and really open up on the way back home.
muahhahaha...
i can see me posting up later on something like... i have some good news and bad news...
good news:
my car does 180km/h so quickly....
bad news:
even the policemans laser said so.

If you need good deal on photography, let me know.
-
Cbrown1986
- Grease Monkey
- Posts: 121
- Joined: Wed Jul 06, 2005 5:00 pm
- FtoSam
- Oldtimer
- Posts: 3924
- Joined: Wed Jul 13, 2005 5:00 pm
- Location: Brisbane West
- Contact:
-
Cbrown1986
- Grease Monkey
- Posts: 121
- Joined: Wed Jul 06, 2005 5:00 pm
2nd of July I get my licence back. I only let my rego slip because I was unlicenced and wasn't planning on driving it anymore. You're about 25 minute drive away from me, infact, went through there to get to work this morning..
I look once every couple of months but am always busy when there's somehting on (except this weekend lol)
I look once every couple of months but am always busy when there's somehting on (except this weekend lol)
- FtoSam
- Oldtimer
- Posts: 3924
- Joined: Wed Jul 13, 2005 5:00 pm
- Location: Brisbane West
- Contact: