Spark plug removal tool.

scracy · Post by **scracy** » Wed Dec 24, 2003 4:09 pm

Just wondering if the sparkplug removal socket came standard with your cars as part of the wheel brace kit or did anyone have to purchase theirs as a seperate item. Mine to my suprise came with the car, is this standard?

payaya · Post by **payaya** » Wed Dec 24, 2003 11:19 pm

its just a normal spark plug took i guess, i used a normal one on my rear banks and it worked fine.

patty · Post by **patty** » Tue Dec 30, 2003 1:41 am

i got mine with the car

scracy · Post by **scracy** » Tue Dec 30, 2003 11:40 am

Ok so it seems to come standard with the car?

Blaze · Post by **Blaze** » Thu Jan 08, 2004 10:02 pm

I bought a normal 11/16 inch (or 17mm) tool from supercheap.
I changed all the plugs and takes longer than i expected coz, the holes where the plugs are, have "bottle-neck" inside.(i dont know what the purpose is). So, i have to grind the tool a little-bit.
Does anyone notice it? Is it normal?

payaya · Post by **payaya** » Fri Jan 09, 2004 12:27 am

i used a normal sydrome socket set, and i can tell you i had no bottle neck.

MarkFTO · Post by **MarkFTO** » Sun Jan 11, 2004 5:31 am

GPX fto's have an internal reduction which either requires a special tool or as mentioned above a little bit of grinding to the socket to make it fit.

The GR doesn't have this problem.

//\\//\\ark

OzFTO · Post by **OzFTO** » Mon Jan 12, 2004 9:29 pm

I ground a cheap plug socket either side - if you need more info I can send a pic.

FTO AUSTRALIA

Spark plug removal tool.

Spark plug removal tool.

Re: Spark plug removal tool.