Question regarding light bulb

This forum is for technical discussions on anything that will make your car handle better or go faster.

Moderators: IMC, Club Staff

Post Reply
User avatar
MonkeyFTO
Newbie
Newbie
Posts: 14
jedwabna poszewka promocja
Joined: Sat Dec 02, 2006 6:00 pm
Location: Brisbane, QLD

Question regarding light bulb

Post by MonkeyFTO »

Hi guys i'm currently at overseas so i guess it would be a bargain buying some spare parts for my GPX. Now's the question.. what's the bulb code for the head light? I was guessing it might be H4 ..

thanks guys!!! :wink:
FTO-101
Grease Monkey
Posts: 254
Joined: Thu Apr 27, 2006 5:00 pm
Location: SyDnEy...ClUb

Post by FTO-101 »

It;s HB4 or 9006
kid_dynamite
Veteran Mechanic
Posts: 836
Joined: Thu Apr 28, 2005 5:00 pm
Location: sydney

Post by kid_dynamite »

Parkers and side indicators are H1
Low beam HB4
High beam HB3
User avatar
Delvance
Veteran Mechanic
Posts: 1194
Joined: Wed Nov 15, 2006 6:00 pm
Location: Sydney South

Post by Delvance »

My low beams are H1s...=/

Not long ago, someone over in general section also posted saying they had H1s too...

Confusing as i thought all FTOs used the HB4's for low beams.
User avatar
MonkeyFTO
Newbie
Newbie
Posts: 14
Joined: Sat Dec 02, 2006 6:00 pm
Location: Brisbane, QLD

Post by MonkeyFTO »

Many thanks guys....your replies were just sweet! :P
kid_dynamite
Veteran Mechanic
Posts: 836
Joined: Thu Apr 28, 2005 5:00 pm
Location: sydney

Post by kid_dynamite »

Delvance wrote:My low beams are H1s...=/

Not long ago, someone over in general section also posted saying they had H1s too...

Confusing as i thought all FTOs used the HB4's for low beams.
The reason you'll find a non-standard bulb like a H1 or H4 bulb in your setup is that the car had factory xenons which were removed, and replaced with a halogen bulb setup (in your car the H1).
User avatar
nosman
Grease Monkey
Posts: 331
Joined: Fri Oct 27, 2006 5:00 pm
Location: Port Macquarie, NSW

Post by nosman »

Delvance, I have H1 as my low beams too =x

Im probably the one your talking about hehe.

i want to get them converted cause my plastic adapter things keep melting. Do you have the same problem? :?
Post Reply