FTO AUSTRALIA

Posted: **Mon Nov 21, 2011 1:28 pm**

I am really interested about the air-con compressor.

how much would postage be to brisbane??

Could you please provide the photo as your convenience. thanks so much~

Posted: **Tue Nov 22, 2011 8:37 am**

Astron_Boy wrote:Is collection payment at the Xmas party cool Bennoz, or would you rather before then?

Done, no problem

hhakan wrote:aircon vents (all of them)
boot interia (the carpet and wood thingy)
and the aircon unit
and other minor stuff that i cant think of yet

Vents - no probs will pull out this arvo
Boot int - No probs, its all there. Wood board is a little warped, but could be reshaped
A/C - As in the climate control unit in the dash?

FTO-BOY wrote:So I take it as the manual engine mounts don't fit on a tip?

Yes they will fit. I actually have a second manual set, but the rubbers are almost shot in them. You could grab inserts from Auto One & press them in if you wanted to reco them.

bob_oz wrote:i'm after a single 16" stock rim or a pair of rims,
did it have the 5-spoke type silver stockies on it?

Apologies mate, but rims are now gone.

pokai41 wrote:I am really interested about the air-con compressor.

Can do, will take it out this arvo & take a pic.

Posted: **Tue Nov 22, 2011 8:43 am**

Bennoz wrote:
FTO-BOY wrote:So I take it as the manual engine mounts don't fit on a tip?
Yes they will fit. I actually have a second manual set, but the rubbers are almost shot in them. You could grab inserts from Auto One & press them in if you wanted to reco them.

Hang on.
I swear that I read the manuals couldn't be used with the autos due to there design and size...

Will read over the thread now, but I was next to postivie, again otherwise you wouldn't have that cross member, I would have collected on the day then and there.
Do need as our engine is sitting on the cross member, no rubber mounts at all.

Edit: viewtopic.php?f=23&t=15195
Have I read it wrong?

Posted: **Tue Nov 22, 2011 11:30 pm**

Folding mirror switch received, cheers.

Posted: **Wed Nov 23, 2011 8:55 am**

Astron_Boy wrote:
Bennoz wrote:
FTO-BOY wrote:So I take it as the manual engine mounts don't fit on a tip?
Yes they will fit. I actually have a second manual set, but the rubbers are almost shot in them. You could grab inserts from Auto One & press them in if you wanted to reco them.
Hang on.
I swear that I read the manuals couldn't be used with the autos due to there design and size...

Will read over the thread now, but I was next to postivie, again otherwise you wouldn't have that cross member, I would have collected on the day then and there.
Do need as our engine is sitting on the cross member, no rubber mounts at all.

Edit: viewtopic.php?f=23&t=15195
Have I read it wrong?

Its the same cross member, same mounting brackets on the box, same mounting points, same metal frames on all mount types.

The only difference is in the bushing itself, tip have an open bush, manuals are solid rubber. Why wouldn't you want solid mounts if you drive hard? Less torque lost through engine twist.

Only difference is a bit more cabin vibration.

Posted: **Wed Nov 23, 2011 9:06 am**

Bennoz wrote:

Its the same cross member, same mounting brackets on the box, same mounting points, same metal frames on all mount types.

Nah, I well realise all that, but from observation of what I saw, the tips had a smaller size rear mount rubber, and was slightly angled in one direction to which the manuals did not?

If they are identical, then I'll def take it off you as I need it, one big thing stopping the car from being driven.

Meanwhile, what's wrong with the forums sync lately? Latest replies are all showing up whacked in the index.

EDIT: Gonna strap my size 15s on for this one (I say 15s as I have size 12s already)

If I were to bring the FTO, could we perhaps drop and install on the Sunday after Xmas party?

Can help refill your fridge...

Posted: **Sat Nov 26, 2011 2:21 am**

Do you have any pictures of the front seats Ben?

Posted: **Fri Dec 02, 2011 4:57 pm**

Do u have radiator n condensor n all the plastic bits. If so how much are u willing to let them go for.

Posted: **Fri Dec 02, 2011 9:06 pm**

Still.have driver side front wheel arch liner and under tray?

Posted: **Fri Dec 16, 2011 6:25 pm**

Do you happen to have the panel that surrounds the instrument cluster with a fog light switch in it like this

Posted: **Sat Dec 17, 2011 10:27 am**

Actually I do. How does $20 + postage sound?

Posted: **Sun Dec 18, 2011 8:49 pm**

Ok so that's for the panel and the fog light switch because I'm after the fog light switch as one of my ftos doesn't have it and I just put fog lights on it

Posted: **Sun Dec 18, 2011 9:09 pm**

Re: Wrecking whole car
Still.have driver side front wheel arch liner and under tray?

Posted: **Sun Dec 18, 2011 9:25 pm**

I'd be interested in the passenger side door speaker cover! How much?

Posted: **Mon Dec 19, 2011 9:32 am**

Sorry, the fog light switch is gone.

Got both the arch liner & speaker cover. Make me an offer

Posted: **Mon Dec 19, 2011 2:50 pm**

Nah I got the panel I just need the switch sorry

Posted: **Tue Dec 20, 2011 10:29 pm**

i do need a left tail light.. so if its not gone let me know

Posted: **Wed Dec 21, 2011 12:26 am**

do u still have the kick plates and the wood grain tip box

Posted: **Wed Dec 21, 2011 8:31 am**

Kick plates no, wood grain tip surround yes

Posted: **Fri Dec 23, 2011 4:05 pm**

how does $30 sound for the wood grain surround or a 6pack of your favourite beer