Page 1 of 1
Please help!! p/s pump or a/c comp
Posted: Mon Oct 27, 2003 9:40 pm
by Chrisp
Please help!!!
My engine has a very annoying whine noise. Related to engine speed. Whurrring. Sounds like a bearing, coming from around the pulleys.
When I remove the belt that goes around the tensioner pulley, a/c and p/s pump it goes away. Put on - comes back. I thought it was the tensioner pulley (rusty looking one at the bottom), so i ordered it from japan.... 3 weeks and $150 later i get it and fit - doesnt fix !!!!!!!
Has anyone heard of anything like this????????
I spent all weekend trying to determine what it is but i still dont know.
I took it to a mechanic and he totally misdiagnosed and lightened my wallet $100 for having a look. BTW - the belts are new.
Thanks for any help!!!
Posted: Mon Oct 27, 2003 10:01 pm
by smorison
could be a bearing in one of the pumps... are you able to tell which one it is? this is just a guess. check with the melbourne guys about a good mechanic to goto that maybe able to help you out.
Posted: Mon Oct 27, 2003 10:29 pm
by TimmyD
Hey,
i think i had the same noise problem.. (a really loud screeching noise which just got louder as i reved. but when revved to about 6k revs in nutural and then did that a couple times, it went away while the car was one.) if this is the prob then it'll be your fan belt... what one of my friends did was some thing purely un-professional..
He got a bar of soap that you'd find in your bathroom, got me to turn the car on, held the bar of soap onto the fan belt untill the bar got till about 1/2 way, then i found its never done that sound again...
BTW if your gona try this than i suggest minding your hands...
If you dont wanna get your hands near it, than get some castrol oil or something like that and just pour it on while the engines running...
Hope that helps.
Tim
Posted: Mon Oct 27, 2003 10:52 pm
by dannyboyau
you could try some
Lanotec HD-15
it is a heavy duty liquid lanolin and comes in a spray can
I have used in the past on idler bearings and has worked great
here is the website address
www.lanotec.com.au
let us know if it works
oh and follow the directions on the can as it works best if you apply to warm engine parts and leave for at least 30 minutes before using again
Posted: Mon Oct 27, 2003 10:59 pm
by dannyboyau
just checked the website and they only list the Lanotec HD-21
looks exactly the same as the can i have but mine must be a older product as i have had it a while
guess they have a new and improved one now
Posted: Tue Oct 28, 2003 8:36 pm
by Chrisp
nah its not a screeching noise, its a whurring noise. it doesnt go away. just changes with engine speed.
i might try that spray stuff, but im not sure if it would work on a p/s pump or a/c condensor.. ?
its not the idler/tensioner, ive replaced that.
thanks for the replies, please keep them coming if anyone knows anything.
Posted: Tue Oct 28, 2003 9:28 pm
by Biot
yeah seen the same belt trick solved with a little dab of transmission fluid on the sides of the belts.....but just a little dab else no more belt
Posted: Wed Oct 29, 2003 9:30 am
by dannyboyau
you spray the lanotac on to the bearings will work on power steering or the air con
but you should be able to tell if it is the air con by getting some one to switch the aircon on and off and see if the noise changes, if no change then it aint the air con